Results 1 to 3 of 3

Thread: Is this a reputable site to buy wiikey?

  1. #1
    Junior Member
    Join Date
    Aug 2008
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Is this a reputable site to buy wiikey?

    Mod*Central*Ltd.**::*Nintendo*Wii*::*Modchips*::*W iikey*Modchip*/*Triwing*Screwdriver*Bundle


    Also anyone have that guide that was made by the people that made wiikey(I think). It shows how to solder normally and with wires. I'm interested in solder WITH wires.

  2. #2
    Member smasher164's Avatar
    Join Date
    Jul 2008
    Posts
    441
    Thanks
    6
    Thanked 12 Times in 6 Posts
    yes it is the perfect site.

    http://www.wiikeyguide.com/images/Wi...-Guide-D2B.pdf

    New wiikey install, No previous soldering experience

    Wiikey Review - The ASSEMblergames.com message board - home of the obscure

    Wiikey Installation | WiiKey Instructions

    WiiKey Instructions - What do you need?

    * You'll need a soldering iron. 15W max will do just fine. These can be found in most major electronics retailer shelves, like Radio Shack, The Source, Circuit City, etc..
    * The installation diagrams (found below under the download link)
    * A Tri-Wing Screw Driver, though you can use a regular STAR / Phillips Screw Driver as well, these tend to fit, and you can open you Nintendo Wii quite easily.
    * Solder with Flux. Again, RadioShack in the US / Canada and many Electronics retailers world wide carry solder.

    Now that you have everything you'll need to open your Nintendo Wii system, and install the WiiKey mod chip, you just have to place the WiiKey on the correct spot on the Wii motherboard. This is quite easy and painless. You can hold it in place, firmly, with one hand while putting the soldering iron over the quick solder pads, and melting the solder until the WiiKey stays in it's place. Once you've soldered it with just one of the quick solder pads, you can stop holding it, as the solder will hold it in place for you.
    Look at the image below closely, to determine where you MUST place the WiiKey mod chip. It's vital that you install the WiiKey and solder the quick solder pads to the correct place on the Wii Motherboard. Soldering them anywhere else could entirely ruin your Wii system. With the clear and detailed installation diagram, you'll be able to place the WiiKey on the exact spot on the main board of your Wii.



    The WiiKey has either circular or small square quick solder pads. We recommend that you first take your solder and soldering iron, and apply some solder to each of the pads. This will make it much easier when you're actually installation the WiiKey. Because you'll have pre-soldered the quick solder pads, when you again place your soldering iron on the pads when installing the modchip, it will quickly melt the solder and connect it with the corresponding points on the Wii motherboard.
    That's it, you're done. Taking apart your Nintendo Wii is probably the hardest / most challenging part of the WiiKey install. The modchip install so easily that even a novice can complete the installation in 15 minutes or less.
    For more information on the WiiKey and it's features and functions, please visit our WiiKey product page.


    Will the WiiKey Wii Mod Chip Work In Your Wii?

    The WiiKey Mod Chip is compatible with all current models of the Nintendo Wii Console. These include USA, PAL and JAPANESE Wii Consoles world wide. There is absolutely no need to check your Wii Model Number. The WiiKey Mod Chip will work in your machine.
    Blue = Compatible
    I am the SSBB master...

  3. #3
    Wiihacks Recommended
    Pro Installer/Store
    Senior Member
    Spyman's Avatar
    Join Date
    Jun 2008
    Location
    Greater Toronto Area
    Posts
    1,546
    Thanks
    33
    Thanked 123 Times in 106 Posts
    modchipcentral
    canadamods.ca and cellexmods.com only north american sites you can buy from that can guarentee an authentic
    Send me a PM if you need any Canadamods.ca support

    $9.95 Flat Rate Shipping to Canada & USA
    Official Support for Canadamods. I am here to help.

    email: sales@canadamods.ca | website: http://www.canadamods.ca | Phone: +1 416 728 0648

    We are the Official Distributors for: P.3Key, Wode JukeBox, WasabiDX, WiiKey, DriveKey, M3i & More - Always Authentic Guarenteed !
    Buy Wode JukeBox v2.0 here: Here

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •