Results 1 to 10 of 10

Thread: Need help please?

  1. #1
    New Member
    Join Date
    Jan 2010
    Posts
    22
    Thanks
    12
    Thanked 0 Times in 0 Posts

    Unhappy Need help please?

    OK I’ve been trying to soft mod my wii since last night (actually got it to work once) and have wasted quite a few hours trying.

    I have given up at the moment and need your help, I’ll just get to it:

    This is the guide I have been following:
    http://www.wiihacks.com/recommended-...d-any-wii.html

    Copied and paste from a different thread:
    Had problems installing cIOS Rev14:
    "Figured it out, I had to download the app called any title deleter and delete IOS249 apparently "error -1035 is caused by trying to install an older version of whatever you're installing, in this case IOS249."

    See I actually got the game to work played around for 10 minutes saved my game and thought the hard part is over now, powered off my wii.

    Today morning before starting up the wii to play NSMB, I remembered I had 2 different versions of NSMB game installed on my hard drive and thought I’ll delete 1 copy and also add Mario Tennis on there too.

    Once I did that I started up the USB loader and and ran NSMB I got a blank screen (I can’t power off my wii either) so I have too unplug it, I attempted around 5 times to play the game with no luck, I decided to install cIOS Rev14 again but that did not solve nothing either.

    Things got worse now:
    The USB loader program doesn’t want to detect my hard drive, tried several times and each time it fails to detect it.

    I decided to restart the whole softmod process again:
    I remembered I made a nand backup as advised on the guide I followed.

    After I done restoring my wii: USB loader recognized my hard drive but when I try to play any game I get that dreaded blank screen, I then remembered I had yet to install cIOS Rev14 I used ios249 to install and when that did not work I tried IOS36 still no luck I.e. blank screen.

    Everytime I try run a game via USBloader I get a blank screen and the only way to turn of my wii is to unplug it from the mains which if I keep doing it might effect my hard drive?

    My wii firmware was 4.0E I upgraded to 4.1E using the guide, can some kind individual please tell me what I’m doing wrong?
    Last edited by Ali99; 01-23-2010 at 08:54 PM.

  2. #2
    New Member
    Join Date
    Jan 2010
    Posts
    22
    Thanks
    12
    Thanked 0 Times in 0 Posts
    Upping.... for help

  3. #3
    New Member albertbert's Avatar
    Join Date
    Dec 2009
    Posts
    398
    Thanks
    42
    Thanked 100 Times in 91 Posts
    Can you please condense that somehow, its way too big, and most of it seems irrelevant.

    So, you installed the softmod with dogeggs guide, and you cant get nsmb to work?

    Oh, you shouldnt have to unplug it. Hold the power button, it might take a little while, but it will power it down.

    Have you tried looking at this guide:
    http://www.wiihacks.com/wii-games/28...ario-bros.html

  4. 2 Users Say Thank You to albertbert For This Useful Post


  5. #4
    New Member
    Join Date
    Jan 2010
    Posts
    22
    Thanks
    12
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by albertbert View Post
    Can you please condense that somehow, its way too big, and most of it seems irrelevant.

    So, you installed the softmod with dogeggs guide, and you cant get nsmb to work?

    Oh, you shouldnt have to unplug it. Hold the power button, it might take a little while, but it will power it down.

    Have you tried looking at this guide:
    http://www.wiihacks.com/wii-games/28...ario-bros.html
    No problem I'll edit the first post.
    NSMB isn't the problem, I currently got 4 games on the hard drive, 2 versions of NSMB (Pal/NTSC) Mario Tennis and Donkey Kong jungle beat like I said all the info of said games show up and I can download covers for each game but I can't run none of them i.e blank screen.

    PS this is guide I used: http://www.wiihacks.com/recommended-...d-any-wii.html
    Only problem I ran into while doing the softmod using the above guide was installing Priiloader

    "5. THE FINAL STEP

    b). Open the Homebrew Channel and load Priiloader, press + to install. After install, your Wii should reboot and load the Priiloader menu. If it doesn't, turn your wii off and on again whilst holding down reset and it will load the Priiloader menu."

    I couldn't get into the priiloader menu even after I reset, but I doubt that has anything to do with my problem?
    Last edited by Ali99; 01-23-2010 at 08:55 PM.

  6. #5
    New Member
    Join Date
    Jan 2010
    Posts
    22
    Thanks
    12
    Thanked 0 Times in 0 Posts
    Anyone else experienced this problem?

  7. #6
    New Member albertbert's Avatar
    Join Date
    Dec 2009
    Posts
    398
    Thanks
    42
    Thanked 100 Times in 91 Posts
    I have no idea whats going on. I cant see anything wrong that you did, so i dont really know what to suggest.

    You should run signcheck, and post the results. It should create a file on your sd called signCheck.csv

    http://wiibrew.org/w/images/b/bb/SignCheck.zip

    This could help the more experienced members pinpoint your problem.

  8. 1 User Says Thank You albertbert For This Useful Post


  9. #7
    New Member
    Join Date
    Jan 2010
    Posts
    22
    Thanks
    12
    Thanked 0 Times in 0 Posts
    Thanks, I'll try that.
    Last edited by Ali99; 01-24-2010 at 06:30 AM.

  10. #8
    New Member
    Join Date
    Jan 2010
    Posts
    22
    Thanks
    12
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by albertbert View Post
    I have no idea whats going on. I cant see anything wrong that you did, so i dont really know what to suggest.

    You should run signcheck, and post the results. It should create a file on your sd called signCheck.csv

    http://wiibrew.org/w/images/b/bb/SignCheck.zip

    This could help the more experienced members pinpoint your problem.
    OK here are the results copied and paste from Microsoft excel:
    SignCheck 0.3b aka loveSexWii build report
    Wii region Europe
    Wii unique device id 67448712

    IOS number "Trucha bug" "Flash access" "Boot2 access" "Usb2.0 IOS tree"

    IOS250 (ver 65535) Enabled Disabled Disabled Enabled
    IOS249 (ver 17) Enabled Disabled Disabled Enabled
    IOS61 (ver 4890) Disabled Disabled Disabled Disabled
    IOS60 (ver 6174) Disabled Disabled Disabled Disabled
    IOS55 (ver 5149) Disabled Disabled Disabled Disabled
    IOS53 (ver 5149) Disabled Disabled Disabled Disabled
    IOS50 (ver 4889) Disabled Disabled Disabled Disabled
    IOS38 (ver 3867) Disabled Disabled Disabled Disabled
    IOS37 (ver 3612) Disabled Disabled Disabled Disabled
    IOS36 (ver 3094) Enabled Disabled Disabled Disabled
    IOS35 (ver 3092) Disabled Disabled Disabled Disabled
    IOS34 (ver 3091) Disabled Disabled Disabled Disabled
    IOS33 (ver 2834) Disabled Disabled Disabled Disabled
    IOS31 (ver 3092) Disabled Disabled Disabled Disabled
    IOS28 (ver 1293) Disabled Disabled Disabled Disabled
    IOS22 (ver 780) Disabled Disabled Disabled Disabled
    IOS17 (ver 518) Disabled Disabled Disabled Disabled
    IOS14 (ver 263) Disabled Disabled Disabled Disabled
    IOS13 (ver 16) Disabled Disabled Disabled Disabled

  11. #9
    New Member albertbert's Avatar
    Join Date
    Dec 2009
    Posts
    398
    Thanks
    42
    Thanked 100 Times in 91 Posts
    Alright, we'll see if anyone can find a problem with that.

  12. 1 User Says Thank You albertbert For This Useful Post


  13. #10
    New Member
    Join Date
    Jan 2010
    Posts
    22
    Thanks
    12
    Thanked 0 Times in 0 Posts
    Thanks man, the problems been solved someone on another forum recommended I try IOS222 and it worked now each game loads up fine.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •