Results 1 to 8 of 8

Thread: Priiloader Question

  1. #1
    Junior Member
    Join Date
    Dec 2009
    Posts
    7
    Thanks
    1
    Thanked 0 Times in 0 Posts

    Priiloader Question

    Hi new here btw. Question is I've recently softmoded my wii 4.1u by files from Kraxon named "wii softmod toolkit PERFECTED.rar" all went quite well (installed hbc fine, priiloader v0.1 (r15) and Neogamma R8 beta15 ios249 (rev 14)).
    My question is I can not get out of the priiloader screen and return to my wii system menu screen (can only go to the hbc). Any help would be greatly appreciated. Hope I gave ppl enough information to help me..... btw looks like a great forum you have here.

  2. #2
    Senior Member
    WiiHacks Staff
    Senior Moderator
    Only site donators may send a PM to WiiHacks Staff
    oddgriffin's Avatar
    Join Date
    Nov 2009
    Location
    New Franklin, Ohio. USA
    Posts
    10,193
    Thanks
    2,206
    Thanked 2,579 Times in 2,012 Posts
    Blog Entries
    2
    Did the guide mention anything about ios60-patched?

  3. #3
    Junior Member
    Join Date
    Dec 2009
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts
    disconnect the USB HD and click system menu in the priiloader.

  4. #4
    Junior Member
    Join Date
    Dec 2009
    Posts
    7
    Thanks
    1
    Thanked 0 Times in 0 Posts
    Oldgriffin thx for reply...i did these step
    step1 bannerbomb hack
    step2 truchabug restorer
    step3 wanakiko's cIOS=
    After getting the Trucha bug back into your system, you can then use that patched IOS to install a cIOS,
    which will allow most homebrew to run perfect, and allow backup games to be played via disc or USB.

    ON THE WII
    1) Run the "Rev14 installer" with the HBC. You get asked what IOS to use. Choose "249" (If you have problems with
    this, go to the Trucha Bug section). Also, if this is your first cIOS, choose "36", as "249 will not be
    given as an option.

    2) When it asks the kind of install, choose wad installation.

    3) Ok, great job! Wanakiko's cIOS is now installed! You're almost done...

    step4 Patch IOS60 & update firmware=
    PATCHING IOS60 TO RUN WADs FROM SD CARD MENU & UPGRADING TO 4.1
    OPTIONAL!!! OPTIONAL!!! OPTIONAL!!!

    *IF YOU ARE NEW TO THE HOMEBREW SCENE PLEASE DO NOT USE DOPIOS, BECAUSE CHANCES ARE YOU WILL BRICK YOUR WII WITH
    IT!!! THIS IS NOT REQUIRED- YOU DO NOT NEED IT. I WOULD VERY MUCH PREFER IF EVERYONE FOLLOWING THIS GUIDE
    FINISHED WITH A WII THAT WORKS! HOWEVER, IF YOU'RE NOT A NOOB WHEN IT COMES TO THE HOMEBREW
    SCENE, I INCLUDED DOPIOS SO THAT YOU CAN PATCH DIFFERENT IOSs, AS SOME GAMES USE A SPECIAL IOS. YOU CAN THEN
    PROCEED TO UPDATE YOUR SYSTEM MENU.

    ON THE WII
    1) Go into Homebrew Channel. Run DOP-IOS v8. Go right till you see IOS60.

    2) If you have the option of installing the "RECENT" version, do it. DO NOT INSTALL THE OLD VERSION OF IOS60!
    It will brick your Wii!!! You also have the option of "dop"ing other IOSs as well- patching is up to user
    preference, and you should do your homework before patching an IOS so you don't end up with an upside down
    Homebrew Channel, a bricked Wii, etc.

    3) If you have system menu 3.1 - 4.0, then follow the following steps (if v4.1 then skip this step):

    * Run wad manager 1.5 and choose "IOS249" (if you haven't installed Waninkoko's cIOS yet, choose "IOS36")

    * Leave NAND emulation as it is and choose "SD card". Then install the "System Menu Wad".

    * When its done, press home to exit.

    3) You now have a fully working system menu 4.1- well done!!!

    NOTE: I have also include the application "Firmware Updater" in the apps folder which can be run from the Homebrew
    channel. You shouldn't need it if you follow the tutorial, but I just thought it would be good to include it
    in case you ever want to use it. The purpose of this download was to provide you with an all-in-one stop,
    so you don't have to google every single app you need.



    I skipped step 3 of this instruction******(because i have a 4.1u system menu)******
    Last edited by DarkPassNger; 12-28-2009 at 04:17 AM.

  5. #5
    Junior Member
    Join Date
    Dec 2009
    Posts
    7
    Thanks
    1
    Thanked 0 Times in 0 Posts
    step5 install priiloader
    step6 imstall neogammar

    again thx for any help

  6. #6
    Retired WiiHacks Staff Tealc's Avatar
    Join Date
    May 2009
    Location
    Sunny Wales, UK
    Posts
    7,152
    Thanks
    502
    Thanked 4,104 Times in 2,453 Posts
    Blog Entries
    1
    Including DOP-IOS in a noob softmod guide is just asking for trouble.

    If you get a System Files courrupt message when attempting to launch System Menu then you'll need to re-install your System IOS & Menu and then re-install Priiloader.

    Still, you probably should ask for support from the creator of the tutorial you followed as it seems a little haphazard with all those CAPS.
    Not really doing much Wii stuff these days.

  7. 1 User Says Thank You Tealc For This Useful Post


  8. #7
    Junior Member
    Join Date
    Dec 2009
    Posts
    7
    Thanks
    1
    Thanked 0 Times in 0 Posts
    "If you get a System Files courrupt message when attempting to launch System Menu then you'll need to re-install your System IOS & Menu and then re-install Priiloader."

    I do not get any message it just goes to the priiloader screen . I just have the homebrew if i go thru the priiloader screen. Prolly a newb question but how would i re-install my system IOS & menu ?

  9. #8
    Junior Member
    Join Date
    Dec 2009
    Posts
    7
    Thanks
    1
    Thanked 0 Times in 0 Posts
    Did manage to load system menu with wad installer after a few hours of reading.......thx for help

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •