Results 1 to 6 of 6

Thread: soft mod attempt failed

  1. #1
    New Member
    Join Date
    Dec 2013
    Posts
    11
    Thanks
    3
    Thanked 0 Times in 0 Posts

    soft mod attempt failed

    Hi All,

    I recently purchased a white Wii running 3.4u. I am trying to mod so I can use it with wiiflow loader to use my system with a USB drive.

    I followed the tutorial for the 3.4u on the "completesoftmodguide" website.

    I was able to install the homebrew channel and bootmii and back up the nand.

    I copied the files from cIOS D2X Installer 3.1 to the "Apps" folder on my sd card. I also used NUS downloader to get the two recommended wads.

    So far as I can see I have followed the instructions in the guide exactly, and I tried several times. However, at the end, when I select the blinking "slot 249" and try to get the operation to go through, I very quickly get the message "failed" and the slot turns red.

    One thing I want to add is that I have wifi on my wii and have verified it works with the system. But I had the impression it was not working with this cIOS installer because the install failed when I tried to do it without the wads. That is why I downloaded the wads and tried to do it that way, but it sitll failed.

    Is the tutorial I am following accurate and should it work, or is there another tutorial someone suggests I follow instead?

    If the tutorial should be accurate, anyone have any ideas what might be causing the failure?

    Thanks for your help.
    Last edited by whitesnowblacksky; 12-18-2013 at 12:50 PM.

  2. #2
    Moderator
    Only Site Donators Can PM Staff
    VWA
    SNES_Master's Avatar
    Join Date
    Dec 2011
    Posts
    4,212
    Thanks
    988
    Thanked 1,124 Times in 885 Posts
    Why are you following another sites guide? We don't support outside guides, you should use our Softmod ANY Wii guide linked in my signature.

  3. 1 User Says Thank You SNES_Master For This Useful Post


  4. #3
    New Member
    Join Date
    Dec 2013
    Posts
    11
    Thanks
    3
    Thanked 0 Times in 0 Posts
    Thanks for your advice. The reason is that I discovered that tutorial before this forum. I just discovered this forum. I will check out the Softmod ANY Wii guide.

  5. #4
    New Member
    Join Date
    Dec 2013
    Posts
    11
    Thanks
    3
    Thanked 0 Times in 0 Posts
    SnesMaster, thanks for directing me to the wiihacks guide. I followed it and everything went smoothly.

    I have succeeded in using USB Loader GX to load back ups from a USB hard drive and everything seems to be working great. I am really impressed by how much faster loading times are on the HDD compared to the disc!

    I have two questions I'm hoping you can help me out with.

    The final step of the tutorial is copying the loader applications to an SD card so that they can be used. Does this mean you always need an SD card dedicated to the loaders to use with your Wii system? Or is there a way that I can run the loaders from the same USB drive where I am storing my games?

    The other thing I am wondering about is if there is some way to "scan" the hard drive with the loader so that it can update the game list when you add games?

    When I was originally testing out the loader, I started with three of my games, in wbfs format, in the wbfs folder. Since then I have added a few more wbfs files, but for some reason the loader still only sees the original three I began with.

    Thanks for your help.

  6. #5
    Member
    WiiHacks Staff
    Moderator
    IRC AOP
    Only site donators may send a PM to WiiHacks Staff
    llaffer's Avatar
    Join Date
    May 2010
    Posts
    3,319
    Thanks
    364
    Thanked 1,046 Times in 893 Posts
    I forget which ones do this, but some loaders require you to update the cache before you can see additional games. I've never had that problem with CFG, so maybe try that.

    Also, we don't recommend using a WBFS formatted hard drive anymore. FAT32 is what we recommend most people use. There is a FAT32 guide that gives recommendations on how to format and install content to the hard drive that is linked in my signature.

    As for running USB loaders off of USB, you can copy the /apps directory from the SD card onto a FAT32 hard drive's /apps directory and then tell HBC to load the apps from USB instead of SD. If you use the Wii Menu forwarders to launch the apps, then I'm not sure if they will know to look for USB if not found in SD or if they are required to be on SD to use the forwarders (I don't use forwarders, so I don't know the nuances of how they work).

    Click Below for recommended Links


  7. #6
    Moderator
    Only Site Donators Can PM Staff
    VWA
    SNES_Master's Avatar
    Join Date
    Dec 2011
    Posts
    4,212
    Thanks
    988
    Thanked 1,124 Times in 885 Posts
    USB Loader GX is the only one I know for sure requires updating the cache.

    If I spelled something wrong, I'll just blame it on auto-correct

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •