Results 1 to 5 of 5

Thread: Backup disk error with Wiiflow

  1. #1
    New Member Astrathestar's Avatar
    Join Date
    Mar 2012
    Posts
    4
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Backup disk error with Wiiflow

    Hello, please pardon me if this has been answered before (if it has please throw some links my way, I've searched but can't seem to get anything), my issue is that when I try to use the backup installer on wiiflow it pops up with 'an error has occurred', the disks I'm using are backup games which my brother burnt a few years back, I'm not quite sure if it is the disks or if I'm missing any ios files on my wii to allow the backup disks to be read.

    I used the softmod any wii guide to modify my wii, the version 4.1E (which is odd because the last time I checked it was 3.2e) serial LEH13115863, the wii drive was produced in 2006 so as far as I know backup games should be able to work. I thought it would be a problem with the DVD drive so I tried using a DVD movie with no luck then installed the DVDx installer with again no luck nor with WIIMC. When I place the backup game into the wii and use the wiidisk channel the game animation appears but when booted an error appears on screen asking to refer to the wii manual.

    My hard drive which I'm currently using wiiflow and store my ed asgames and apps on is a seagate freeagent desktop 700GB formated as FAT32, here's a system check if you need it, personally I don't know what most of it means. If someone could explain what Trucha Bug and all that means it would help me understand the process more .

    sysCheck GX v1.0.0 by Erik Spyder

    sysCheck GX is running under IOS58 (rev 6176).

    Console ID: .
    Region: PAL.
    Hollywood v0x11.
    Boot2 v4.
    System Menu v54450 (?).
    BC v6.
    MIOS v65535.


    Found 89 titles.
    Found 49 IOS and 3 IOS Stubs on this console.

    Priiloader is installed.


    IOS 4 (rev 65280): Stub
    IOS 9 (rev 54321): Trucha Bug, ES_Identify, NAND Access
    IOS 10 (rev 768): Stub
    IOS 11 (rev 54321): Trucha Bug, ES_Identify, NAND Access
    IOS 12 (rev 526)
    IOS 13 (rev 1032)
    IOS 14 (rev 1032)
    IOS 15 (rev 1032)
    IOS 16 (rev 54321): Trucha Bug, ES_Identify, FLASH Access, NAND Access
    IOS 17 (rev 1032)
    IOS 20 (rev 54321): Trucha Bug, ES_Identify, NAND Access
    IOS 21 (rev 1039)
    IOS 22 (rev 1294)
    IOS 28 (rev 1807)
    IOS 30 (rev 54321): Trucha Bug, ES_Identify, NAND Access
    IOS 31 (rev 3608)
    IOS 33 (rev 3608)
    IOS 34 (rev 3608)
    IOS 35 (rev 3608)
    IOS 36 (rev 54321): Trucha Bug, ES_Identify, NAND Access
    IOS 37 (rev 5663)
    IOS 38 (rev 4124)
    IOS 41 (rev 3607)
    IOS 43 (rev 3607)
    IOS 45 (rev 3607)
    IOS 46 (rev 3607)
    IOS 48 (rev 4124)
    IOS 50 (rev 54321): Trucha Bug, ES_Identify, NAND Access
    IOS 51 (rev 4864): Stub
    IOS 53 (rev 5663)
    IOS 55 (rev 5663)
    IOS 56 (rev 5662)
    IOS 57 (rev 5919)
    IOS 58 (rev 6176): USB 2.0
    IOS 60 (rev 54321): Trucha Bug, ES_Identify, NAND Access
    IOS 61 (rev 5662)
    IOS 70 (rev 54321): Trucha Bug, ES_Identify, NAND Access
    IOS 80 (rev 54321): Trucha Bug, ES_Identify, NAND Access
    IOS 90 (rev 54321): Trucha Bug, ES_Identify, NAND Access
    IOS202 (rev 65535): Trucha Bug, ES_Identify, NAND Access, USB 2.0
    IOS222 (rev 4): Trucha Bug, ES_Identify, NAND Access, USB 2.0
    IOS223 (rev 4): Trucha Bug, ES_Identify, NAND Access, USB 2.0
    IOS224 (rev 65535): Trucha Bug, ES_Identify, NAND Access, USB 2.0
    IOS236 (rev 54321): Trucha Bug, ES_Identify, NAND Access
    IOS245 (rev 21008): Trucha Bug, ES_Identify, NAND Access
    IOS246 (rev 21008): Trucha Bug, ES_Identify, NAND Access
    IOS247 (rev 21008): Trucha Bug, ES_Identify, NAND Access
    IOS248 (rev 21008): Trucha Bug, ES_Identify, NAND Access
    IOS249 (rev 21008): Trucha Bug, ES_Identify, NAND Access
    IOS250 (rev 21008): Trucha Bug, ES_Identify, NAND Access
    IOS251 (rev 21008): Trucha Bug, ES_Identify, NAND Access
    IOS254 (rev 65281)

    Report generated on 2012-03-31.
    I've been modding my wii for just a week and a half, following souly on tutorials on here so I don't know that much about ios' or which ones I need to fully make use of my wii. I would like to get my wii to a point where I can play DVDs and install the backup disks to my hard drive using wiiflow, if someone could give me some advice or throw some tutorials at me then I would most appreciative.

    Thank you in advance, if you need any more information I would be more then happy to provide it. If I have submitted this in the wrong section then I apologise, please move it to the correct section, cheers .
    Last edited by Astrathestar; 03-31-2012 at 11:27 AM.


  2. #2
    Jax
    Jax is offline
    Senior Member
    Retired WiiHacks Staff
    Jax's Avatar
    Join Date
    Apr 2009
    Location
    Schenectady,NY
    Posts
    3,695
    Thanks
    3,233
    Thanked 1,345 Times in 1,121 Posts
    From what your saying , it sounds like the drive might need to be cleaned or it is on it's way out.
    I've had this problem with one wii myself...Where it would show the Image in the Wii disc channel and error-ed out when I tried to play it.

    As long as it sees the Image in the Disc channel you are all good to use the Usb loading features.(Use a Computer to re-rip the back-up's to the Hard drive.)

    As for the ios/Cios here is a link...Wii Cios Explained

    Good Luck .
    Last edited by Jax; 03-31-2012 at 12:13 PM. Reason: More Info,Fixed Link...

  3. #3
    New Member Astrathestar's Avatar
    Join Date
    Mar 2012
    Posts
    4
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Thank you for the swift responce , the wii itself was brought about sixteen days ago from games CeX in the UK and begun modding it two days later after doing some research, I honestly don't know the usage age of the console as it is second hand. I've been able to load games via my hard drive quite nicely during these past few days however my brother has a larger collection then me in disk form as he has a chipped console, its just very painful and time consuming having to re-load the backup disk as a wbfs thro.ugh the computer then putting the file onto the hard drive. It does work that way from doing some trial and error however personally I think it is much quicker to do it through wiiflow but I am unable to get it to work without errors.


  4. #4
    Jax
    Jax is offline
    Senior Member
    Retired WiiHacks Staff
    Jax's Avatar
    Join Date
    Apr 2009
    Location
    Schenectady,NY
    Posts
    3,695
    Thanks
    3,233
    Thanked 1,345 Times in 1,121 Posts
    Sorry to here that. Sounds like what I mentioned above about the Drive.

    I personally never use my Disc Drive to rip games to the hard drive.(Don't want to wear out the Disc Drive!)
    So I always ripped them with my Computer.

    Have you tried cleaning the drive? If so and you still can't get it to read/rip properly it could be...
    1.The Disc Drive.(Breaking Down.)
    2.The Backup's are scratch/damaged in some way making it inoperable.(unable to be read.)

    I can't see anything wrong with your System Check ,it looks fine.
    Seeing how the drive is able to read Dvd's Chances are ,that your second hand Wii has been used to read through the Disc Drive (Backup's).

    Causing the wear and tear and eventually a breakdown.Sorry.

    Sorry I couldn't be much more help to you on this matter.
    Last edited by Jax; 03-31-2012 at 01:44 PM.

  5. #5
    New Member Astrathestar's Avatar
    Join Date
    Mar 2012
    Posts
    4
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Don't be sorry, I'm greatful for your help. I will look into disk cleaning on youtube unless you or someone else has a good tutorial on it, I don't really have the money to buy a wii cleaning kit right now and veeeerrrry impacient to wait for it to arrive haha.

    Enough of that though XD. The backup disks are were a christmas gift for my niece, her wii is mod chipped like my brother's and are able to be picked up on their wii. I used the Wii Backup Manager to extract the disk and convert it to a wbfs file then placed it into the wbfs subfolder with the rest of the games. The extracted backup disk game as a wbfs works, loads-bells-whistles and all but the disk causes the screen to go black for a moment then states that an error has occurred.


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •