Results 1 to 10 of 10

Thread: Help! Wiimote dosn't work!

  1. #1
    Junior Member
    Join Date
    Jun 2008
    Posts
    63
    Thanks
    1
    Thanked 1 Time in 1 Post

    Question Help! Wiimote dosn't work!

    i'm really stressed out cuz after I modded my Wii, my wiimotes didn't work. I tried to sync it and replace the batteries. I even borrowed a friend's sensor bar to see if my sensor bar didn't work. Even with my friend's working sensor bar, it still couldn't detect the wiimote. I brought my wiimotes to my friend's wii and it worked there. I reattached the faceplate too, incase that does anything.
    any help would be appreciated

  2. #2
    Junior Member
    Join Date
    Jun 2008
    Posts
    63
    Thanks
    1
    Thanked 1 Time in 1 Post
    turns out that the wii sensor bar only emits IR signals for the wiimote to triangulate it's position. It's not actually "sensing" anything.
    Wii sensor bar hax0red - Engadget
    so i was wondering what "senses" the wiimote if the sensor bar dosn't do anything

  3. #3
    Junior Member
    Join Date
    Jun 2008
    Posts
    63
    Thanks
    1
    Thanked 1 Time in 1 Post
    *bump* =P .

  4. #4
    Member
    Retired Staff Member

    Join Date
    Jun 2008
    Posts
    1,494
    Thanks
    70
    Thanked 230 Times in 116 Posts
    I have not heard of this type of problem before, but with the information you have given, it could be the connection for your sensor bar on the wii that may be the issue.

  5. #5
    Junior Member
    Join Date
    Jun 2008
    Posts
    51
    Thanks
    0
    Thanked 3 Times in 2 Posts

    Ca

    If the motes are not syncing the bluetooth card in the Wii might be damaged or not in all the way. RE-open and check it.

    or

    http://www.wiire.org/Wii/console/motherboard
    Last edited by dingchow; 08-05-2008 at 12:10 PM.

  6. #6
    Junior Member
    Join Date
    Jun 2008
    Posts
    63
    Thanks
    1
    Thanked 1 Time in 1 Post
    omg...thx so much...i jiggled the bluetooth thing and it worked =P!!!

  7. #7
    New Member Jiiprah's Avatar
    Join Date
    Jul 2008
    Posts
    248
    Thanks
    5
    Thanked 195 Times in 26 Posts
    The Wiimote connects to the Wii through Bluetooth. This is why, unlike a TV remote, the wiimote doesn't have to be aimed at the Wii.

    Yes the sensor bar, actually, is just some IR led lights powered by the Wii. The real technology is in the Wiimote. It has an IR camera that actually does the sensing. So depending on where the sensor bar is compared to where the Wiimote is how it determines where you are aiming at.

    The Motion sensitivity is from either an accelerometer or gyro or both.

    | Wii LU64 | USB Loader GX | Western Digital 320GB Passport Essential HD |

  8. #8
    Member smasher164's Avatar
    Join Date
    Jul 2008
    Posts
    441
    Thanks
    6
    Thanked 12 Times in 6 Posts
    actually this is what happened to me! I took out my sensor bar and aimed to to wii remotes at the wii to basically create one like in the video and it worked! But wait for this! I took out the batteries of the second wii-remote and had the sensor bar unplugged and the first wii-remote was still working for some odd reason! I have a feeling that the wii doesn't need a sensor bar. Or two wii remotes to make one hand on the screen. So far i have been just using one wiimote without the sensor bar for a month now an it has still been working out fine!
    I am the SSBB master...

  9. #9
    Junior Member
    Join Date
    Jun 2008
    Posts
    63
    Thanks
    1
    Thanked 1 Time in 1 Post
    some ppl have reportedly used 2 candles or lights as replacements for the ir sensor bar

  10. #10
    New Member
    Join Date
    Aug 2008
    Posts
    8
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Talking

    you know, all this fuss over the Wii sensor bar, what it does, what it does not do etc...

    the facts are,

    • it senses nothing,,, all it is, is a IR sources that the Wiimote detects and decides where you are pointing it...
    • yes, for the bulk of the time, you proberbly do not need the sensor bar
    • its true, two tea lights also work just as well...
    • yes, its true.... rip the sensor bar open, extend the wires and place each IR emitter at oposit ends of the tv.... the further apart they are, the more accurate it is...


    what is all the fuss if you need it or not.... just leave the damn thing where it is supposed to be.... on top of the TV.... you think for one min that nintendo will make a item, pack it and ship it if you dont really need it?

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •