My modded Wii won't eject a disc that i put in. What should I do?
Notices
Welcome to the Wii Hacks Forums, the world's largest Nintendo Wii Hacks / Modding resource and forum community where over 14,000 Wii users from around the world come to discuss all issues related to Nintendo Wii discussions!
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
im not totally sure but the last time i read the wii manual (lol)
im sure i saw that if the console was modified in anyway the console would have voided warranty? you could always try a small pair of tweezers if you really need to get it out...
Try holding down the eject button for at least 10 seconds after turning on the console. If that doesn't work (or you've already tried that). Try the following steps.
1. Unplug Wii from power outlet.
2. Plug in Wii again.
3. Press power button.
4. Press Eject button for at least 10 seconds.
5. If the disc doesn't eject try holding down the power button for 10 seconds and then the eject button again.
you might need to open it up and losen the screws that hold your drive in place .. the slot's may not be lining up causing the disk not to eject .. too much, or too little pressure on the drive can cause issues ..
i get this same problem when i put my chip in the wii but when i take it out it works fine. (d2c,wasabi modchip,sony/verbatim dvd-r at 4x,2x)niothings working
i get this same problem when i put my chip in the wii but when i take it out it works fine. (d2c,wasabi modchip,sony/verbatim dvd-r at 4x,2x)niothings working
Linear Mode
