Guitar Hero 6: Warriors of Rock & Other Music Games [GUIDE]
Guide for Music Games
**Should Work for ALL Music Games**
► - - - - - - ◄
Sections
1. What cIOS you should/can use to load each game
2. Check if you have the required cIOS
3. How to set the Loader to use a certain cIOS
4. Disc Loading from a Backup Loader
5. Original Disc Loading from Disc Channel
6. Troubleshooting
[1] - cIOS Used to Load - From Backup Loaders
cIOS Used to Load - From Backup Loaders
Quote:
Important Note
Disc Loading - You can either Use Uloader to boot with cIOS223/223/224
OR Use Neogamma with cIOS [37], [56], or [57] base. If you need to change the cIOS NeoGamma uses (it only uses 249 normally) then use the
Neogamma IOS Switcher.
USB Loading - Using Configurable USB Loader or Wiiflow Is recommended. This will allow you to boot the games with ALL cIOS (222, 223, 224, 249, 250).
Note: If you have no luck you can try cIOS with a base of [37] - [37 +38] - [56] - [57] - [58]
All Guitar Hero Games - Use IOS 223 v4 [Base 37 + 38]
--- OR cIOS Rev 19 +
[Base 56]
Band Hero - Use IOS 223 v4 [Base 37 + 38]
--- OR cIOS Re19 +
[Base 56]
All RockBand Games - Use IOS 223 v4 [Base 37 + 38]
--- OR cIOS Re19 +
[Base 56]
Karaoke Revolution -
Use IOS 223 v4 [Base 37 + 38]
--- OR cIOS Re19 +
[Base 56]
Just Dance - Use IOS 222 or 223 v4 [Base 37 + 38]
--- OR cIOS38 Rev 17
(WBFS Drives only)
Def Jam Rapstar - Use IOS 224 v5 [Base 57]
--- OR cIOS Re19 +
[Base 57]
Grease - Use IOS 224 v5 [Base 57]
--- OR cIOS Re19 +
[Base 57]
[2] - Check if you have the required cIOS
Check if you have the required cIOS
Find the softmod guide you followed below and check which of the reuired cIOS you have installed already.
- Softmod 3.0-4.2 [E/U/J] Wiis - By Cile - cIOS223[37+38], cIOS249[56], cIOS250[57]
- Softmod ANY Wii - By Mauifrog - cIOS223 [37-38], cIOS224 [57] cIOS247[37], cIOS248[56], cIOS250[57]
- The 4.3 Softmod Guide - By Mauifrog - cIOS223 [37-38], cIOS224 [57] cIOS247[37], cIOS248[56], cIOS250[57]
- Softmod for ANY 4.2 Wii - By ShadowSonic2 - cIOS223 [37-38], cIOS224 [57], cIOS247 [37], cIOS248 [56], cIOS250 [57]
- 3.1-4.1 Softmod for ANY Wii - By Dogeggs - You don't have the required cIOS
Install Method if needed.
How To Install Hermes cIOS222/223/224
1. Backup and Format your SD card
**Remove your USB HDD and all GameCube memory cards and controllers**
2. Load Multi-Mod Manager from HBC - Select Wad Manager -- Press A
3. Press 1 to install all wads - Press A
4. Verify an error free Install of All 3 wads - Press Home to Exit.
(MMM is set to load IOS249, if you don't have it then choose "Load another IOS" and select IOS36 or IOS236 or IOS250).
Note: What this Installs
Note:
This will install Hermes cIOS with the recommended base IOS.
IOS222 v4 Is installed as Base IOS38.
IOS223 v4 Is installed as Base IOS37 Merged with IOS38
IOS224 v5.1 Is Installed as Base IOS57
You now have cIOS222/223/224 installed. You can try ALL installed cIOS to load the games by changing the IOS setting for each game in your backup loader.
How to Install cIOS249/250 (cIOSx Rev 20)
1. Backup and Format your SD card
**Remove your USB HDD and all GameCube memory cards and controllers**
2. Load Multi-Mod Manager from HBC - Select Wad Manager -- Press A
3. Press 1 to install all wads - Press A to confirm
4. Verify an error free Install of BOTH wad files - Press Home to Exit.
(MMM is set to load IOS249, if you don't have it then choose "Load another IOS" and select IOS36 or IOS236 or IOS250).
Note: What this Installs
Note:
This will install Waninikoko cIOSx with the recommended/needed base IOS.
IOS249 Rev20 Is installed as Base IOS56
IOS250 Rev20 Is installed as Base IOS57
You now have cIOSx 249 & 250 installed. You can try both cIOS to load games by changing the IOS setting for each game in your backup loader.
[3] - How to set the Loader to use a certain cIOS
Backup Loader cIOS Settings
Configurable USB Loader -> Select The Game-> Press 1 to go into Options-> IOS=Select which cIOS you want to use for the game
WiiFlow -> Use a different boot ios .dol or Select a Game -> Go into Settings-> Page 2-> IOS=Select which cIOS you want to use.
USB Loader GX -> Select a game-> Go into Settings-> Game Load-> IOS=Select Which cIOS you want to use.
ULoader -> Select a game-> Configure-> cIOS/Boot-> Select the cIOS you want to use.
[4]- Disc Loading from a Backup Loader
Disc Loading from a Backup Loader
NeoGamma - Insert the Disc, load NeoGamma, load the game.
ULoader - Insert the Disc and load the game or Press 2 to get to the Disc Menu while in uLoader.
Configurable USB Loader - A Formatted USB Device needs to be connected, Press " - " (Minus) to access the Disc menu
[5] - Original Disc Loading from Disc Channel
Original Disc Loading from Disc Channel
[6] - Troubleshooting
USB HDD Compatibility/Setup Issue
Check the lists to make sure your drive is compatible.
Reference the USB HDD guides to be sure of proper setup.
How to Install an IOS Wad
1. Download --
WAD-Manager_v1.7.rar
2. Extract and Copy the Wad Manager Folder to the apps folder on your SD (SD:/apps/WAD-Manager_v1.7/boot.dol)
3. Wad Files go in the Wad folder on your SD (SD:/wad/xxxxxx.wad)
4. Launch Wad Manager Via HBC -- Select IOS249 -- Press A
5. NAND Emulation -- Disabled -- Press A ---- Wii SD Slot -- Press A
6. Select the wad you want to install -- Press A To Install -- Wait -- Press HOME When finished.
- - - -
Credits & Thanks
Cile, Stomp_442, Ithian, Nightstah, Demo777, Tealc, JoostinOnline, Mauifrog, ShadowSonic2
- - - -
