PLZ HELP: WASABI V5 D2C modding PLZ HELP
ive recently tried to mod two different wiis. both with a wasabi v5. im on a d2c board adn when i put the chip inside it is firmly placed there but with one wii the drive doesnt read burned games, but it reads normal games. ive tried sony dvd-r at 1x,2x and verbatim dvd+r at 4x(these were the only discs i had) but none are working. then with the other wii when i put the chip in the drive doesnt work. it wont eject discs or read discs, unless i pull the chip. is there any way to solve these problems. is there something that i need to solder. the chip came with a yellow wire not sure if i really needed this wire because it said presoldered when i bought. thanks
*UNDERSTAFFED*ONLY MK Contestants & ***** Supporters can PM MODS
are you sure you have a d2c and not a d2c2? make sure the wiiclip+wasabi i configured for the d2c as it may have been configured for another wii board.
positive its d2c. now the wii with disc problem started to work so that one succesful but the other still i get the green light but it just does read my discs or even start the disc drive. if modchip off or if ghost squad burned on a dvd is not in the dvd drive wont turn on or work. the discs dont work now for the second wii im hacking
i get the green light but when i do the dvd drive locks up, sometimes i get it to work bu then the dvd drive doesnt read the game. positive its not the game because got it workin on my friends wii.(probably luck), but PLEASE HELP i really want to hack my wii. donot want to have wasted 360 dollars+ (controllers,system,chip,clip, all that stuff)and not be able to hack/mod. THANKS
Last edited by arkalos13; 07-16-2008 at 09:55 PM.
have u soldered the one F wire which is required even with the clip?
no not yet because my friends wii is workin even without the soldering of F, i dont want to solder anything before i know that it will make it work for sure.
if i solder the f wire and it doesnt work wat should i do, is there anyhthing else to solder?
well as it states on the wii clip website....all d2c require F wire so you dont have a choice....if it doesnt work after the F wire soldered then you need to make sure clip is placed properly......not sure how many times you took the clip on and off but if you keep doing it enough u will wear the teeth out that actually make the contact on the ic legs and this will result in a wii clip that cant even be reused.
the thing is that me and my friend r workin on 2 wiis. his and mine. his worked even without the f wire and mine is still at the green light dvdv drive locks up state. if the teeth wear off like u said cant i just desolder it off the wii clip and solder the chip on directly to the wii. if it comes down to that. i hope not.
ive posted photos of my installation on the other thread called wasabi installed drive wont spin or not detected. PLZ HELP
never mind i just found out my wii is a d2C2 so all this was a waste. thanks for your help everyone.
Last edited by arkalos13; 07-22-2008 at 07:36 PM.