Page 1 of 3 123 LastLast
Results 1 to 10 of 25

Thread: START to FINISH modding....Links to [almost] EVERYTHING!

  1. #1
    Junior Member
    Join Date
    Jul 2008
    Location
    Minneapolis
    Posts
    33
    Thanks
    0
    Thanked 9 Times in 1 Post

    Us START to FINISH modding....Links to [almost] EVERYTHING!

    For anyone new reading up on the forums all I can say is if you read this site and Google enough you will most likely find all your answers. Here is a little list I put together of what I found useful during my modding experience. I'm not a wii guru for sure but I thought this might be helpful for some. For those of you that are experts at this, yes I have a lot of free time, I work night shift, and no I am not trying to repeat or write what already has been said in other forums, I'm just trying to compile what I found useful for those in similar situations. However, every situation is different so mod at your own risk! Enjoy

    WHAT WII DO I HAVE?
    A D2C with 3.3u update, aka USA. LU5792XXXX, purchased 6/20/2008.

    HOW DID I KNOW WHAT MODCHIP TO GET?
    Generally the D2Pro9 v2 v4c solderless chip is recoomended and easy to install for those with D2C and D2C2 chipsets, which are all the Wiis except for the very, very new ones apparently - D2E. I don't know anything about those. To tell which chipset you have just take you wii apart by following the link below. Either way the D2Pro v2 v4c will work, it's just a matter of if you will need to update your chip via the D2Pro9 programmer [$30] using your computer or by simply using a DVD. Unless your Wii is VERY new in which case you may have a D2E I hear, just take it apart and look for peace of mind.

    WHERE DID I GET MY CHIP FROM?
    I ordered my chip 7/10/2008, received 7/28/2008 with triwiNG screwdriver from Canadamods.ca. Total with shipping it was $103. Came with v1.3 update on it. CLICK HERE FOR THE LINK

    HOW DID I KNOW THE CHIP WAS REAL?
    When it arrives click here and check it out. CLICK HERE FOR THE LINK

    WHAT ELSE DID I NEED AND WHERE DID I GET IT?
    1. SD Card 2gb = $14
    Do not get a SDHC card, or high capacity card. CLICK HERE FOR THE LINK

    2. Triwing screwdriver = $0.96
    Note: My mod chip also came with one from canadamods so now I have two. I guess if you order through them you don't need to get this. Although if you need one I got mine through this site in like 4 days free shipping from Hong Kong! CLICK HERE FOR THE LINK

    3. DVD's = $31
    [see below for more information]

    HOW DID I TAKE THE WII APART?
    Simple. CLICK HERE FOR THE LINK
    HERE IS ANOTHER GOOD LINK
    [ame="http://www.youtube.com/watch?v=g8epujddQTc"]HERE IS A YOUTUBE VIDEO FOR TAKING IT APART[/ame] Thanks jbloggs

    HOW DID I INSTALL THE MODCHIP D2Pro9 v2 v4c?
    Follow the link and click "Install" on the left. From start to finish it took about 30 minutes. Although I'm pretty meticulous so it can be installed in a much shorter time. Somthing that helped me was punching all the screws I took out of the wii through a piece of paper with a crude drawing of where they went on the wii. Keeps you from loosing them and remembering where they went. CLICK HERE FOR THE LINK

    [ame="http://www.youtube.com/watch?v=rv-fI4CNIRo&fmt=18"]OR HERE FOR THE YOUTUBE VIDEO[/ame] Thanks vanylapep

    HOW AND WHY DID I UPDATE THE CHIP?
    Click on the link below, I used v1.5 Utility Disc. There may be newer ones released so just look at what they have. Extract the ISO [use winwar-free just google it] and burn it to a DVD and put it in your wii. Follow the instructions on the screen and poof, updated. *Note: the D2Pro9 2v v4c I got from canadamods.ca in July had v1.3 on the chip when it arrived, not a bad thing but the update V1.5 fixs a lot of bugs. I probably would have left v1.4 if that was on it instead. CLICK HERE FOR THE LINK

    HOW DID I KNOW I WOULDN'T BRICK [RUIN/PARTIALLY RUIN] MY WII?
    I used Wiu 1.1, you open the ISO with it, and it will tell you if there is an update on the disc and what region the game is. It will fix one or both if you need it to as well. FYI, if you have a USA Wii, and there is an update on the USA [NTSC] disc, it's okey to leave it there, it won't brick your wii, and it makes it easier to burn them working. At least for me it did. It won't brick your wii if the game is the same region as your wii. It's worth noting that if the game has been changed from a PAL to NTSC [USA] there still may be a PAL update so just check to be sure with Wiu 1.1 first. If you only use your backups of the DVD games you own you will never have a problem, that's what I do. Read this forum for info. CLICK HERE FOR THE LINK

    HOW DID I BURN MY BACKUP DVD GAMES?
    Use IMGburn, it's free and easy. CLICK ON THIS LINK to see how to use it.

    WHAT DVD BRAND DID I USE?
    Verbatim seems to be the best DVDs for backup games, most people say the DVD-R at x2 speed to start. Here are the ones I got from bestbuy and they work great for USA games, although for some reason all the games that were changed from PAL (Europe) to NTSC-U (USA) via wiu 1.1 get disc errors partially through the game. That problem I fixed by burning those games to Memorex DVD-R at x2 speed from bestbuy and they work perfectly. *Note the Verbatim DVDs I got were from India, which if you read is not as good a Singapore but I didn't have the option. HERE IS WHAT I BOUGHT

    More about DVD types


    NOTE: YOU ARE DONE MODDING AT THIS POINT! YOU CAN PLAY BACKUP GAMES NOW! THE REST IS A "SOFT HACK" OR A MOD FOR THOSE WITH OR WITHOUT MODCHIPS. IT'S WELL WORTH DOING IF YOU ARE WILLING TO READ A FEW TUTORIALS.

    WHAT IS THE HOMEBREW CHANNEL AND TWILIGHT HACK?
    CLICK HERE TO FIND OUT

    HOW DID I INSTALL THE HOMEBREW CHANNEL?
    Easy if you just follow the steps 1 by 1, even if you already updated your wii to 3.3u. There is a install kit, meaning that you just have to put theses files on your SD card exactly how they are along with your WAD failes and everything will just work when you plug it in. Simple enough. HERE IS THE KIT. For more information on the kit and how to install it click here. Note: You don't need a modchip to do this, although I waited so I could use a backup copy of Zelda which worked perfectly. CLICK HERE TO SEE MORE

    WHERE DID I GET THE HOMEBREW APPLICATIONS?
    CLICK HERE FOR THE APPLICATIONS


    Hope this posting helps a few people with basic questions, feel free to correct any mistakes I have as well, it is 2am so I'm sure there are a few.
    Last edited by Krank; 01-10-2011 at 12:39 AM. Reason: edited for updated forum rules

  2. 9 Users Say Thank You to MNWII For This Useful Post


  3. #2
    Junior Member
    Join Date
    Aug 2008
    Posts
    8
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Thank you very much I love your post. I have been looking for a modern guide like this. Your the Man...

  4. #3
    Wiihacks Recommended
    Pro Installer/Store
    Senior Member
    Spyman's Avatar
    Join Date
    Jun 2008
    Location
    Greater Toronto Area
    Posts
    1,546
    Thanks
    33
    Thanked 123 Times in 106 Posts
    great tutorial, I have some stuff that will tie in nicely with this
    Send me a PM if you need any Canadamods.ca support

    $9.95 Flat Rate Shipping to Canada & USA
    Official Support for Canadamods. I am here to help.

    email: sales@canadamods.ca | website: http://www.canadamods.ca | Phone: +1 416 728 0648

    We are the Official Distributors for: P.3Key, Wode JukeBox, WasabiDX, WiiKey, DriveKey, M3i & More - Always Authentic Guarenteed !
    Buy Wode JukeBox v2.0 here: Here

  5. #4
    Member
    Retired Staff Member

    Join Date
    Jun 2008
    Posts
    1,494
    Thanks
    70
    Thanked 230 Times in 116 Posts
    Great guide MNWii. Thanks very much for your time and effort in putting all this information together. It is very much appreciated.

  6. #5
    Junior Member
    Join Date
    Jul 2008
    Location
    Minneapolis
    Posts
    33
    Thanks
    0
    Thanked 9 Times in 1 Post
    Please feel free to add anything you'd like! I just put what I found useful, any additional pictures, links or videos would be awesome.

  7. #6
    Junior Member
    Join Date
    Jul 2008
    Posts
    106
    Thanks
    0
    Thanked 2 Times in 2 Posts
    MNWII: you said: "HOW DID I INSTALL THE HOMEBREW CHANNEL?
    Easy if you just follow the steps 1 by 1, even if you already updated your wii to 3.3u." Does that mean that even if i have the latest firmware installed, i can still install the HBC? I've read around the forum saying that it makes it not possible? I'm just a bit confused.

    Btw, if you find the youtube video useful to add to ur guide, please add the link to the guide, i will delete my post afterward.

  8. #7
    Wiihacks Recommended
    Pro Installer/Store
    Senior Member
    Spyman's Avatar
    Join Date
    Jun 2008
    Location
    Greater Toronto Area
    Posts
    1,546
    Thanks
    33
    Thanked 123 Times in 106 Posts
    will post our step by step today also, just need to wait for youtube upload. so far we've only distributed the video to those that purchased from us and asked as it is bandwidth intensive since its off our server, but we can make it public on youtube for everyone to make this guide perfect

    Its a complete Step by Step with tips and tricks .
    Send me a PM if you need any Canadamods.ca support

    $9.95 Flat Rate Shipping to Canada & USA
    Official Support for Canadamods. I am here to help.

    email: sales@canadamods.ca | website: http://www.canadamods.ca | Phone: +1 416 728 0648

    We are the Official Distributors for: P.3Key, Wode JukeBox, WasabiDX, WiiKey, DriveKey, M3i & More - Always Authentic Guarenteed !
    Buy Wode JukeBox v2.0 here: Here

  9. #8
    Junior Member
    Join Date
    Jul 2008
    Location
    Minneapolis
    Posts
    33
    Thanks
    0
    Thanked 9 Times in 1 Post
    Quote Originally Posted by vanylapep View Post
    MNWII: you said: "HOW DID I INSTALL THE HOMEBREW CHANNEL?
    Easy if you just follow the steps 1 by 1, even if you already updated your wii to 3.3u." Does that mean that even if i have the latest firmware installed, i can still install the HBC? I've read around the forum saying that it makes it not possible? I'm just a bit confused.

    Btw, if you find the youtube video useful to add to ur guide, please add the link to the guide, i will delete my post afterward.
    Yes the homebrew channel and twilight hack work perfect even with the 3.3u update. The hack was fixed to work with the 3.3u as well shortly after the update was released. If you still have 3.2u you can use and ISO DVD that will install everything for you without having to use the zelda game etc... That's clearly the easiest way but you need a modchip and a 3.2u wii. If you have 3.3u update with or without a modchip you will just have to install the homebrew channel via the twilight hack. Hope that helps and thanks everyone for the videos!

  10. #9
    Junior Member
    Join Date
    Jul 2008
    Posts
    15
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by vanylapep View Post
    MNWII: you said: "HOW DID I INSTALL THE HOMEBREW CHANNEL?
    Easy if you just follow the steps 1 by 1, even if you already updated your wii to 3.3u." Does that mean that even if i have the latest firmware installed, i can still install the HBC? I've read around the forum saying that it makes it not possible? I'm just a bit confused.
    It is possible, Team Twiizers has released a new Twilight hack compatible with 3.3. (Did it on my PAL 3.3 about 2 days ago, really easy.)
    Just get the newest versions from the homebrew channel website.

  11. #10
    Wiihacks Recommended
    Pro Installer/Store
    Senior Member
    Spyman's Avatar
    Join Date
    Jun 2008
    Location
    Greater Toronto Area
    Posts
    1,546
    Thanks
    33
    Thanked 123 Times in 106 Posts
    http://www.wiihacks.com/d2pro9/4651-...html#post20536

    Btw great work again on this tutorial
    Last edited by Spyman; 08-06-2008 at 02:29 AM.
    Send me a PM if you need any Canadamods.ca support

    $9.95 Flat Rate Shipping to Canada & USA
    Official Support for Canadamods. I am here to help.

    email: sales@canadamods.ca | website: http://www.canadamods.ca | Phone: +1 416 728 0648

    We are the Official Distributors for: P.3Key, Wode JukeBox, WasabiDX, WiiKey, DriveKey, M3i & More - Always Authentic Guarenteed !
    Buy Wode JukeBox v2.0 here: Here

Page 1 of 3 123 LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •