Page 4 of 44 FirstFirst ... 2345614 ... LastLast
Results 31 to 40 of 433

Thread: NAND programming- Low Level Brick recovery without bootmii

  1. #31
    Junior Member
    Join Date
    Mar 2009
    Posts
    3
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Hi,

    I have unbricked my wii, thank for the tools. Now i am having problem region changing, keep getting error ret -102. do you know what might be the problems?

    Thanks

  2. #32
    New Member erikie's Avatar
    Join Date
    Oct 2009
    Location
    Netherlands
    Posts
    524
    Thanks
    8
    Thanked 170 Times in 141 Posts
    Blog Entries
    2
    At least progress, however I have no clue about this region change error. I know that others succesfully region changed their wii after this formatter tool.
    I tried it myself too and have the same error. Maybe someone else knows?
    If you think I helped you please click the little thanks button
    Send me a PM if you have any questions regarding unbricking with infectus mod chip or post a message in here http://www.wiihacks.com/bricked-wii-...installed.html

  3. #33
    Junior Member
    Join Date
    Jan 2010
    Posts
    8
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Okay i need something cleared up, to flash boot2 block 3 and 4 need to be flashed right? why would someone flash block 0-7?

  4. #34
    New Member erikie's Avatar
    Join Date
    Oct 2009
    Location
    Netherlands
    Posts
    524
    Thanks
    8
    Thanked 170 Times in 141 Posts
    Blog Entries
    2
    The software I use is much quicker with flashing everything and you at least know it works. I know that bootmii is not always installed in block3 and 4.
    I have seen it installing into 1 and 2 or 6 and 7
    So flashing 3 and 4 only is not the best way.
    If boot1 matches then it is pretty quick to flash all boot blocks.
    As long as your boot2 is equal to or higher then the current one on the wii
    If you think I helped you please click the little thanks button
    Send me a PM if you have any questions regarding unbricking with infectus mod chip or post a message in here http://www.wiihacks.com/bricked-wii-...installed.html

  5. #35
    New Member erikie's Avatar
    Join Date
    Oct 2009
    Location
    Netherlands
    Posts
    524
    Thanks
    8
    Thanked 170 Times in 141 Posts
    Blog Entries
    2
    There is no way of downgrading your boot2 version. If the used version does not work try a higher version.
    at the moment boot2v2 2v3 and 2v4 exists
    If you think I helped you please click the little thanks button
    Send me a PM if you have any questions regarding unbricking with infectus mod chip or post a message in here http://www.wiihacks.com/bricked-wii-...installed.html

  6. #36
    New Member erikie's Avatar
    Join Date
    Oct 2009
    Location
    Netherlands
    Posts
    524
    Thanks
    8
    Thanked 170 Times in 141 Posts
    Blog Entries
    2
    that should work, when I hoop up an infectus again I can do some experiments on this. At the moment I am flashing a complete nand which takes rather long and this machine had boot1d. It has the newest motherboard revision (50)

    A safe thing is to backup your complete boot blocks, block 0 - 7
    then flash it in 3 and 4. If it does not work read back blocks 3 and 4 and compare them with the original ones. A lot of users get ground bounce with the infectus. That means FF inserted and all bytes are shifted one place. Which is not good.
    If you think I helped you please click the little thanks button
    Send me a PM if you have any questions regarding unbricking with infectus mod chip or post a message in here http://www.wiihacks.com/bricked-wii-...installed.html

  7. #37
    Junior Member
    Join Date
    Jan 2010
    Location
    Russia
    Posts
    3
    Thanks
    1
    Thanked 0 Times in 0 Posts
    Hi friends.
    1.Dump full nand 528mb(Low Level Brick)-ок
    2.Dump full nand same working console(BootMii beta 5 installed) 528mb-ok
    3.First 8 * 64 * 2112 bytes of 2 NAND dump-completely identical
    4.Clean up your nand (nand working console) dump using Wiinand(infectus selection)
    5.This will only remove the last 1024 bytes (the keys) -ok
    6.Help me, I do not understand more
    (I unsoldered nand and use programator-so everything is correct reads)
    Last edited by Alexix; 02-01-2010 at 08:53 AM.

  8. #38
    New Member erikie's Avatar
    Join Date
    Oct 2009
    Location
    Netherlands
    Posts
    524
    Thanks
    8
    Thanked 170 Times in 141 Posts
    Blog Entries
    2
    1) check the first boot block to find out which version of boot1 you have.
    You can also send the first 135000 bytes to me and I can tell you
    2) if you have boot1b in your machine you need to inject bootmii blocks in boot2
    Or you can flash the first 8 blocks with bootmii injected blocks from someone else
    If you need anything send me a PM
    If you think I helped you please click the little thanks button
    Send me a PM if you have any questions regarding unbricking with infectus mod chip or post a message in here http://www.wiihacks.com/bricked-wii-...installed.html

  9. 1 User Says Thank You erikie For This Useful Post


  10. #39
    Junior Member
    Join Date
    Jan 2010
    Location
    Russia
    Posts
    3
    Thanks
    1
    Thanked 0 Times in 0 Posts
    send you a PM-be able to download?
    Last edited by Alexix; 02-01-2010 at 09:21 AM.

  11. #40
    Junior Member
    Join Date
    Jan 2010
    Location
    Russia
    Posts
    3
    Thanks
    1
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by erikie View Post
    2) if you have boot1b in your machine you need to inject bootmii blocks in boot2
    How to do this?

Page 4 of 44 FirstFirst ... 2345614 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •