Page 25 of 152 FirstFirst ... 1523242526273575125 ... LastLast
Results 241 to 250 of 1514

Thread: Triiforce MRC User Guide - How to Load Wii Ware from a USB Drive or SD Card

  1. #241
    New Member Sinyk's Avatar
    Join Date
    Oct 2009
    Posts
    505
    Thanks
    45
    Thanked 389 Times in 95 Posts
    Quote Originally Posted by bestknightmare View Post
    as I said before, I got through the whole process, but when loading the wiiware, will become black screen or error message. Tried with Tetrix Party and Bomberman Blast



    so I went with the shortcut and used WadManager to install the games directly into channel. So I don't really understand what is the negative result of this instead of this long process as stated in this forum?
    Ok if you are getting a black screen, you are porbably missing the cIOS that you described in an earlier post. I have played both of the games you mentioned using Triiforce so I know they work.

    Depending on what system version you are on, you may want to check the appropriate hacking guide in the tutorials section to find out about installing a cIOS.
    4.2U || BootMii beta 4 (boot2) || DVDx v2 || HBC 1.0.8 || cIOS 38 r17 || WiiFlow R254-249 Carbonik || Triiforce MRC SS || MPlayer CE 0.76 || WiiRadio 0.4
    Patriot 16GB SDHC Class 6 || 500GB Seagate 7200.10 in NexStar CX eSATA

    Triiforce MRC User Guide - How to Load Wii Ware from a USB Drive or SD Card

    Stomp_442's guide: How to install Hermes cIOS 202, 222, 223 and 224

    If you want to say thanks, say it with the Thanks button below!

  2. #242
    New Member Sinyk's Avatar
    Join Date
    Oct 2009
    Posts
    505
    Thanks
    45
    Thanked 389 Times in 95 Posts
    cios 38 rev14 is available from this download: cIOS38_rev14-Installer.rar

    You can run it through homebrew.

    When you run the cIOS38r14 installer, select IOS36 as the one it should use and then select wad install.

    The auto run versions of triiforce just auto select the NAND you want to use. These do not handle the cIOS issue. If you do not have it, using the auto run or normal .dol file will give you the same result.
    Last edited by Sinyk; 12-17-2009 at 09:02 AM.
    4.2U || BootMii beta 4 (boot2) || DVDx v2 || HBC 1.0.8 || cIOS 38 r17 || WiiFlow R254-249 Carbonik || Triiforce MRC SS || MPlayer CE 0.76 || WiiRadio 0.4
    Patriot 16GB SDHC Class 6 || 500GB Seagate 7200.10 in NexStar CX eSATA

    Triiforce MRC User Guide - How to Load Wii Ware from a USB Drive or SD Card

    Stomp_442's guide: How to install Hermes cIOS 202, 222, 223 and 224

    If you want to say thanks, say it with the Thanks button below!

  3. #243
    New Member
    Join Date
    Nov 2009
    Posts
    138
    Thanks
    12
    Thanked 5 Times in 5 Posts
    Anyone have any luck figuring out why when you pick wii menu it just goes to black screen and you have to power it off ?


    i have reloaded triiforce again and redid the nand with bootmii and also recreated common-key ...still nothing ...

    I might try to do nand with sf dumper

  4. #244
    New Member
    Join Date
    Dec 2008
    Posts
    24
    Thanks
    3
    Thanked 0 Times in 0 Posts
    how do i dump nand with bootmii?

  5. #245
    New Member Sinyk's Avatar
    Join Date
    Oct 2009
    Posts
    505
    Thanks
    45
    Thanked 389 Times in 95 Posts
    Quote Originally Posted by bestknightmare View Post
    how do i dump nand with bootmii?
    1. Have bootmii installed for starters.

    2. Load bootmii

    3. Select the option to dump the nand.

    4. Wait while the nand dumps to your sd card (make sure you have about 550 MB free)

    5. Go to page 6, post #55 of this thread and follow the steps to use that nand.
    4.2U || BootMii beta 4 (boot2) || DVDx v2 || HBC 1.0.8 || cIOS 38 r17 || WiiFlow R254-249 Carbonik || Triiforce MRC SS || MPlayer CE 0.76 || WiiRadio 0.4
    Patriot 16GB SDHC Class 6 || 500GB Seagate 7200.10 in NexStar CX eSATA

    Triiforce MRC User Guide - How to Load Wii Ware from a USB Drive or SD Card

    Stomp_442's guide: How to install Hermes cIOS 202, 222, 223 and 224

    If you want to say thanks, say it with the Thanks button below!

  6. #246
    New Member
    Join Date
    May 2009
    Posts
    34
    Thanks
    0
    Thanked 9 Times in 6 Posts
    Quote Originally Posted by frankyz View Post
    Hi Wiiman10 and Sinyk. Tried to use the method from page6 but stuck at the step 5 (everything appeared to go well before this step). When I tried to extract the data from bin by running "zestig.exe nand-key.bin nand_dec.bin nand", nothing happened.

    Any ideas? Thanks.

    Well, the command does seem to do anything. Find an alternative: Wii NAND Extractor by parannoyed at GBAtemp.net. Will post the result later.
    zestig.exe will run in your command line (msdos) and create the necessary nand_dec.bin. It will take awhile maybe 10-20 minutes but it will create the nand file for you. I had the same concern until it just appeared.

    Post back your results with the wii nand extractor program, if that works for you. Cheers.

  7. #247
    New Member
    Join Date
    Nov 2009
    Posts
    52
    Thanks
    11
    Thanked 1 Time in 1 Post
    Quote Originally Posted by Wiiman10 View Post
    zestig.exe will run in your command line (msdos) and create the necessary nand_dec.bin. It will take awhile maybe 10-20 minutes but it will create the nand file for you. I had the same concern until it just appeared.

    Post back your results with the wii nand extractor program, if that works for you. Cheers.
    zestig.exe actually extract the nand_dec.bin to a folder according to Slimm. I've got the nand_dec.bin all right. BTW, I used the nand extractor and ShowMiiWads but could NOT get Triiforce to load Contra (code dump). I was able to play it with Wad Manager though.

  8. #248
    New Member
    Join Date
    May 2009
    Posts
    34
    Thanks
    0
    Thanked 9 Times in 6 Posts
    Quote Originally Posted by frankyz View Post
    zestig.exe actually extract the nand_dec.bin to a folder according to Slimm. I've got the nand_dec.bin all right. BTW, I used the nand extractor and ShowMiiWads but could NOT get Triiforce to load Contra (code dump). I was able to play it with Wad Manager though.
    Yes the folder it dumps too is named nand. Contra Rebirth works fine for me. Are you using a full nand dump from bootmii or the simple fs dumper program?
    Also make sure you have all the proper ios's required. Do you have cios 249 rev 14 installed and did you do the trucha bug restorer to the required ios? Are you running triforce from an sd card or usb hdd?

    edit: Oh ok you used the nand extractor program hmmm...

  9. #249
    Junior Member Smyers75's Avatar
    Join Date
    Dec 2009
    Posts
    66
    Thanks
    4
    Thanked 21 Times in 14 Posts

    Multi TriiForces

    I'm know I'm getting ahead of the game here, but I also feel confident someday soon all the bugs will be worked out and TriiForce will be as solid as any of the disk loaders.

    For now, it works great for me so I'd like to continue with stage two.


    Now before I attempt to reinvent the wheel (and yes, I have done my due diligence using the search engines), has anyone already figured out a way to have separate TriiForce channels that will launch their own NANDs?
    Something like a Triiforce - N64 Channel that lists only N64 games, a Triiforce - SNES Channel for SNES, another for just WiiWare….I think you get the idea.

    I’d like to use some of my external USB FAT32 drive to do this, but I’m also willing to use an 8GB SDHC to get it working.

    What comes to mind right away is splitting the FAT32 into a few partitions and modifying TriiForce to point to different partitions based on which “Channel” I choose…maybe??


    Any thoughts or ideas would be greatly appreciated.
    Insults and flames are always taken with a grain of salt. (After all, were only talking about games…)

  10. #250
    New Member Sinyk's Avatar
    Join Date
    Oct 2009
    Posts
    505
    Thanks
    45
    Thanked 389 Times in 95 Posts
    An interesting idea. I could see having a triiforce forwarder that would load a usb nand then a separate forwarder that would load an sd nand, but a single forwarder that could load only certain files.. I think there would have to be a way for triiforce to figure out what kind of game it is and then decide what to do with it. I think the program itself would require some serious modifying in order to handle "nand browsing" in that sense.

    The problem right now is that the games are loaded onto the nand that you dump, so there's no real way to separate the game types without having multiple nands.
    4.2U || BootMii beta 4 (boot2) || DVDx v2 || HBC 1.0.8 || cIOS 38 r17 || WiiFlow R254-249 Carbonik || Triiforce MRC SS || MPlayer CE 0.76 || WiiRadio 0.4
    Patriot 16GB SDHC Class 6 || 500GB Seagate 7200.10 in NexStar CX eSATA

    Triiforce MRC User Guide - How to Load Wii Ware from a USB Drive or SD Card

    Stomp_442's guide: How to install Hermes cIOS 202, 222, 223 and 224

    If you want to say thanks, say it with the Thanks button below!

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •