Page 112 of 152 FirstFirst ... 1262102110111112113114122 ... LastLast
Results 1,111 to 1,120 of 1514

Thread: Triiforce MRC User Guide - How to Load Wii Ware from a USB Drive or SD Card

  1. #1111
    New Member
    Join Date
    Dec 2009
    Posts
    234
    Thanks
    128
    Thanked 15 Times in 12 Posts
    Quote Originally Posted by Alberforth View Post
    I'm sorry if this has already been asked, I tried scanning through the replies but there are just so many. It should be an easy question though. Can I use the nand backup i made when I originally softmodded my wii, or should I do a new nand dump?
    Remember always make copies and keep you original NAND. I have copied it on CD's.
    You can use your original COPY of your NAND, it's up to you. When using ShowMiiWads you can timm it down and remove all unwanted wads.

    PS, I was using a USB stick...working for a while fine....and editing it with ShowMiiWads. My USB stick corrupted! now I am reformatting and need to do it again, not from scratch though. I should have backed it up.
    [ 4.0U ]-[ cIOS 38 r17 ]-[ Priiloader 0.3b (rev48)]-[ BootMii as boot2 ]-[ HBC 1.0.8 ]-[ WiiFlow 2.2 r414 ]-[ Triiforce MRC SS v10b ]-[ Savegame Manager GX r79 ] [UAE Wii/Snes9x GX/Wii64/SDL MAME Wii/DOSBox Wii/GxGeo ]

    It is said an expert is someone who has made all the mistakes. I don't want to be a Wii expert then..thanks to everyone at WiiHacks

  2. #1112
    New Member
    Join Date
    Mar 2010
    Posts
    30
    Thanks
    7
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by drvipej View Post
    Remember always make copies and keep you original NAND. I have copied it on CD's.
    You can use your original COPY of your NAND, it's up to you. When using ShowMiiWads you can timm it down and remove all unwanted wads.

    PS, I was using a USB stick...working for a while fine....and editing it with ShowMiiWads. My USB stick corrupted! now I am reformatting and need to do it again, not from scratch though. I should have backed it up.
    Dude I noticed you're using DOSbox, how is the performance? Can you use most games/apps with a good framerate, saving games ok? etc...

    Thanks.

  3. #1113
    New Member
    Join Date
    Dec 2009
    Posts
    234
    Thanks
    128
    Thanked 15 Times in 12 Posts
    Quote Originally Posted by Persian McLovin View Post
    Dude I noticed you're using DOSbox, how is the performance? Can you use most games/apps with a good framerate, saving games ok? etc...

    Thanks.
    I have to admit, I want to test everything....soon. I need a usb keyboard, as the on board keyboard does not have the '~' key and you cannot do a directory with long file names. Tested a few things, but I had to rename the directory under 8 digits. I also realised that I lost all my dos skills...
    [ 4.0U ]-[ cIOS 38 r17 ]-[ Priiloader 0.3b (rev48)]-[ BootMii as boot2 ]-[ HBC 1.0.8 ]-[ WiiFlow 2.2 r414 ]-[ Triiforce MRC SS v10b ]-[ Savegame Manager GX r79 ] [UAE Wii/Snes9x GX/Wii64/SDL MAME Wii/DOSBox Wii/GxGeo ]

    It is said an expert is someone who has made all the mistakes. I don't want to be a Wii expert then..thanks to everyone at WiiHacks

  4. #1114
    New Member gegebene's Avatar
    Join Date
    Mar 2009
    Posts
    47
    Thanks
    12
    Thanked 1 Time in 1 Post
    WW and VC game's saves are stored on HDD?
    There is some way to remove them? ore store them on real nand?! (like original triiforce?)
    PAL Wii → bootmii b2 → Waninkoko cIOS rev 17 → Hermes cIOS 222/223 v5 → System Menu 4.1 by Waninkoko → Homebrew channel 1.0.6 → Wiikey 1.9b

  5. #1115
    New Member
    Join Date
    Jan 2010
    Posts
    20
    Thanks
    1
    Thanked 0 Times in 0 Posts
    Well, my USB nand has never worked. I've really dug into this and tried and spent a lot of energy and time on it... Till I decided today to try and copy my NTFS partition with 30 Wii backups and make it partition #2, and not 1, so that FAT32 with the nand will become #1. I think maybe that could make a difference, and get me past the "I can't get title" message.

    I shall report back to you later, after the very slow copying of a 500 GB partition is done

  6. #1116
    New Member
    Join Date
    Dec 2009
    Posts
    234
    Thanks
    128
    Thanked 15 Times in 12 Posts
    Quote Originally Posted by Olav View Post
    Well, my USB nand has never worked. I've really dug into this and tried and spent a lot of energy and time on it... Till I decided today to try and copy my NTFS partition with 30 Wii backups and make it partition #2, and not 1, so that FAT32 with the nand will become #1. I think maybe that could make a difference, and get me past the "I can't get title" message.

    I shall report back to you later, after the very slow copying of a 500 GB partition is done
    hmmm, it will be interesting to see what happens............................ eventually,
    good luck
    [ 4.0U ]-[ cIOS 38 r17 ]-[ Priiloader 0.3b (rev48)]-[ BootMii as boot2 ]-[ HBC 1.0.8 ]-[ WiiFlow 2.2 r414 ]-[ Triiforce MRC SS v10b ]-[ Savegame Manager GX r79 ] [UAE Wii/Snes9x GX/Wii64/SDL MAME Wii/DOSBox Wii/GxGeo ]

    It is said an expert is someone who has made all the mistakes. I don't want to be a Wii expert then..thanks to everyone at WiiHacks

  7. #1117
    Junior Member
    Join Date
    Feb 2009
    Posts
    5
    Thanks
    1
    Thanked 0 Times in 0 Posts
    Thanks for the answer to my previous question, but now I have another...it shouldn't be too much trouble either. I've got Triiforce installed and I think its all correct, but I have an old crappy TV, so when I load the triiforce program, I can't see the text at the very bottom of the screen. I can see the first line asking me to select game type, but I can just barely see the top of the next line and without knowing what the options are supposed to be I can't decipher what they say. Its actually kind of funny. So anyway, if someone could quickly load up triiforce and go to that first screen and jot down the options and post them here, that would be awesome! I'm afraid to blindly pick one and mess something up.

  8. #1118
    Junior Member
    Join Date
    Apr 2010
    Posts
    5
    Thanks
    4
    Thanked 0 Times in 0 Posts
    finally after 2 days and reading this thread i got the external HD to run with Triiforce. follwed all the steps in the guide. then there is an addtional step to perform, set the Fat32 partion with your nand files on your hdd to active. i am using a hitachi 1T with 3 partions (ntfs, fat32 and wbfs). the order of partion which one is 1, 2 or 3 does not matter. working perfect. ran 6 different games with triiforce and no problems
    Last edited by dcypher29; 04-06-2010 at 07:27 PM.

  9. #1119
    New Member
    Join Date
    Mar 2010
    Posts
    30
    Thanks
    7
    Thanked 0 Times in 0 Posts
    Yeah, I had that too but then gradually errors will occur such as DSI exception dumps when trying to go to USB Loader etc...

  10. #1120
    Junior Member
    Join Date
    Apr 2010
    Posts
    5
    Thanks
    4
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by Persian McLovin View Post
    Yeah, I had that too but then gradually errors will occur such as DSI exception dumps when trying to go to USB Loader etc...
    i tried a usb loader but it didnt work for me. the triiforce forwarder works fine. Triiforce-HTRI3fixed.wad
    Attached Files Attached Files
    Last edited by dcypher29; 04-06-2010 at 07:38 PM.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •