12-19-2009, 07:34 AM
I had the very most up to date WII (I didn't know I was going to do this) and this guide worked perfectly. Friends are begging me to do it for them. Thanks!
12-19-2009, 07:39 AM
I had the same prob with WII Sport Resort, don't throw away your burned disc! do this:
Originally Posted by murali5
Install NeoGamma r6 and set the options in Region to Force Video - Disc and leave everything else off and default. Set config options to anti 002 fix ON and alt dol to DISC. now when you launch the dvd it will say main.dol on the alt dol line. press the control pad right and it changes to PLAYER.dol. launch it now. You should see the intro video for motion plus and be booted back to system menu.
Load up NeoGamma again. This time around leave all your options as they were, except turn the alt dol to OFF. Launch it again, it should now load everytime without issue.
I also was able to get the PAL version working on my NTSC system on NTSC TV by having all region options turned on. IE. VIDTV YES, Country Patch YES, Force Video DISC and Patch Video ALL. I hope this helps anyone who may still be struggling! Good luck.
Trashed 2 discs before I found this post on thepiratebay.com
Hope it helps.
2 Users Say Thank You to frankrhps For This Useful Post
12-19-2009, 08:19 AM
yes i did select "uninstall"... but when it tries to uninstall.. i get errors..!!
Originally Posted by EricN
.. pls help someone !
12-19-2009, 08:27 AM
ok i think im giving up ...... i cant get that 249 stub removed !!... i tried all nite ... my head hurts now i guess im just not that of a wii or tech wizz ... back to being a mommy now !!! lol
12-19-2009, 08:29 AM
I've safely did everything... All works well... Backups, and i guess USB Loader GX too (still don't know which HD is best for it)... But here's the bad part... Before those steps done my wii used to connect to the internet wirelessly thanks to my router... It's one of those that are compatible to the wii... After the update, it won't connect anymore to anything, and the connection test says error connection... I used the error code and went to the support website of nintendo and it says the following
Error Code: 52130
There appears to be an issue with your wireless router's firewall.
Review our "Slow Downloads or Errors Received While Connecting" to ensure wireless interference is not causing the problem, by clicking here.
Make sure your router is not listed on our "known incompatible routers" page, by clicking here.
Try a "Manual Setup" with the Wii console (how to), using your network's IP configuration settings. To access these settings:
On your PC, click "Start" and then "Run."
Type "CMD" into the field that appears to open a new window.
Type "IPCONFIG/ALL" and press "Enter" to display a list of internet settings. Locate the settings asked for by the Wii console during the Manual Setup process and enter them.
Power cycle your router and modem by unplugging them both from the wall. Wait a few minutes, and plug the modem back in. Wait a couple of minutes for the modem to initialize, then turn on the router. Try to connect the Wii console online and test for proper response.
Disabling your router's wireless security may help the Wii console's online connection. Consult your wireless router's manual or check with the router manufacturer for more details. Please note Nintendo provides these recommendations as a resource to our consumers; it is up to each consumer to determine if adjusting their router's security settings are the right choice for their home network.
It is possible that your Internet Service Provider (ISP) is not compatible with the Wii console. For instance, if you need to login with a user name and password when you try to go online for the first time after restrarting your PC, your ISP is likely not compatible. Please contact your service provider for more information.
If you are still receiving this error code, please click here for assistance.
Now my router works well, and i'm sure of that (since i'm writing you this reply thanks to it), so can anyone help me...
12-19-2009, 08:44 AM
Did you try
Originally Posted by smile2day
"If you fail at doing the above, you can replace steps B and C with steps 1 to 3 of this guide!!!!!!! "
(See end of step c on the first page for the link)
12-19-2009, 09:45 AM
Damn, this guide rocks!! Thank you messie!!!
I'm totally newbie with the wii stuff and I was able to succesfully hack my virgin 4.2 wii.
I just have a little question: when I go to HBC it shows me a screen with a new version (1.0.6) and ask me if I want to update. Now, is it safe to update it or just choose the cancel button?
If I update it do I have to do all those steps again or is not neccesary because is just a HBC update?
Thank you for any help.
12-19-2009, 09:48 AM
it s just a HBC update, do it
12-19-2009, 09:58 AM
Originally Posted by firstname.lastname@example.org
12-19-2009, 10:11 AM
I followed this all the way through C8. All I want to do is play emulators. I have an older Wii and I copied all the files over to the SD card root but the HBC does not see them on the card. What am I missing?
Tags for this Thread