10-03-2009, 03:49 AM
do part b again... you should not get this error i am gonna try to run it my own and see what happens...
10-03-2009, 03:49 AM
tis hack is fake it just crashes ur wii out so dont use ive tryed it loads of time still no good sum 1 out there will get it right
10-03-2009, 03:52 AM
blah blah blah blah *i cant get this to work and its the guides fault* blah blah blah
Edit on second thought i will leave you to your misery...
10-03-2009, 04:00 AM
Ok just runned the part C and loaded with no problem at all. You should change ios249 all the way to the left until the thing says "Do not reload ios" and select wad installation, it worked for me fine. Also, detach every single device you have except for the SD card (GC controllers, mem cards, usb)
10-03-2009, 04:11 AM
Thanks for the great work you have done here. It seems you have made things simple enough. I am running a softmodded LU64 with 4.0. Do you think it is worth upgrading to 4.2 and doing this guide or should I just sit put for a while?
Was also wondering about this: http://www.wiihacks.com/wii-custom-s...ader-lu64.html I have preloader installed via that method. Would I be able to install preloader again on 4.2 with LU64? Am quite worried about not having a safety net you know.
Thanks for your help.
10-03-2009, 04:12 AM
still got the same error, with WAD installation too.
look, if i will not choose "Do not reload ios" so the console will stuck, so there is no other option for me.
i also retried part B as you asked.
10-03-2009, 04:17 AM
corriew, it is not recommended to go to 4.2 yet stay where you are.
Dea... i cant really tell what the problem is, it should work normally...try once more and select ios36...
see also this, it s the same in general, but see if you can get sth out of it
pls report back if you do it.
1 User Says Thank You messie For This Useful Post
10-03-2009, 04:42 AM
try guide on two accidentaly updated wii,(updated from virgin version), on both of them when I try to load from SD systems hangs.
10-03-2009, 04:44 AM
Step B? what are you referring to? did you try normal wadmanager from HBC first? did you format the SD card?
10-03-2009, 04:45 AM
i retried part B again and seems like i installed the wad file insted of uninsralling it,
now when i am tring to uninstall it i got "ret = 1017" error.
Tags for this Thread