Page 33 of 38 FirstFirst ... 233132333435 ... LastLast
Results 321 to 330 of 376

Thread: Unbrick Your Wii (Banner Brick)

  1. #321
    New Member
    Join Date
    Dec 2009
    Posts
    60
    Thanks
    6
    Thanked 0 Times in 0 Posts
    Thanks and yes I've tried to hold reset and boot into preloader. I have the patched ios60 installed and I have a bad wad of ios70 installed hopefully that wont be a big problem. I recently ordered the wasabi dx, Do you think that will fix my problem?

  2. #322
    Junior Member
    Join Date
    Jul 2009
    Posts
    9
    Thanks
    4
    Thanked 1 Time in 1 Post

    Brick-ed Wii

    I have a mod chip installed, I tried the whole reboot with the reset held, nope
    but here is what is working right now, I can boot to it through starfall by pressing Y on my GC Controller, I get is the 3.2U to come up so I know the system hasn't updated. I can run games, both burnt and retail because of the modchip, but how can I load WAD manager from this screen? If I can even do that at all??

  3. #323
    New Member
    Join Date
    Jul 2009
    Posts
    9
    Thanks
    0
    Thanked 1 Time in 1 Post
    ixitimmyixi,
    Any Mod-Chip should work fine, I normally use Drive key for bricked consoles as it can be set to autoboot and is easy to plug in.


    kschartz2472,
    If I understand correctly Starfall is not working, correct? The WADManger iso works on 3.2, check ixitimmyixi's prevoius post he has a link on there.
    If Starfall works why not boot to the Homebrew channel, and run WADManager from there?
    Last edited by anarchy2007; 03-08-2010 at 07:11 AM.

  4. #324
    Junior Member
    Join Date
    Jul 2009
    Posts
    9
    Thanks
    4
    Thanked 1 Time in 1 Post
    I am not sure why starfall is not allowing me to boot to anything but the system restore ( 3.2(USA)) Screen. I will download the WADManager iso and burn it and hope it works, unlike the UUDv2 or The Official Backup. Not sure why but my wii has a different screen at startup than anyone else. It loads the initial wii loading screen, goes black but still plays the menu music??? any reasons that anyone knows?

    Update:
    UUDv2 - doesn't even change the screen from 3.2(USA)
    Official - Screen turns black, disk spins, nothing
    WADManager - Screen turns black, disk spins, nothing, Tried several times and left running for several hours with both the official and WAD

    ???
    Last edited by kschartz2472; 03-08-2010 at 11:27 AM.

  5. #325
    New Member
    Join Date
    Jul 2009
    Posts
    9
    Thanks
    0
    Thanked 1 Time in 1 Post
    Put the disc in the Wii, turn the console off. Then turn the Wii on while holding al 4 directional buttons on the GC controller. Disc should then boot. In other words you'll have better luck if the console is turned on with the disc inside. Otherwise using the method explained in the first post go to data management and format the Wii memory, it should also sort out you issue

  6. #326
    Junior Member
    Join Date
    Mar 2010
    Posts
    4
    Thanks
    1
    Thanked 0 Times in 0 Posts
    first post ever : i have read all pages of this thread, and tripled my knowledge for sure. i have a friend with a wii he can get cheap. problem with it he says is this
    boots black screen With sound. Is this a banner brick maybe that could be fixed with savemefii i have a drivekey in my wii and i have softmod 3 wiis at 4.2u no problems.
    if someone with a similar problem could point me in the right direction /thread please. thanks and im going back to reading haha 3 nights now alot of great stuff guys thanks to all.

  7. #327
    Junior Member
    Join Date
    Jul 2009
    Posts
    9
    Thanks
    4
    Thanked 1 Time in 1 Post
    Okay, I have the same problem as you probably have read. lol, I still have not fixed it trying everything, The newest one that I can not try is the New Super Mario Bros fix because I have brickblocker that does not allow games to update the System, But with the drivekey set to autoboot, you can still play every game with it, thats what I do. So if you let him borrow your Drivekey and try using the NSMBs Update, It will more than likely work, It has to be a Retail copy of the game Hope this helps and let me know if I can help you further!

  8. 1 User Says Thank You kschartz2472 For This Useful Post


  9. #328
    Junior Member
    Join Date
    Mar 2010
    Posts
    4
    Thanks
    1
    Thanked 0 Times in 0 Posts
    well i can get my wii into savemefrii but not the other wii, even when i removed the bluetooth hopein it might be bad. i believe the dvd is good, it goes thought the motions , take disc ejects spins
    guess its a bad video output? wonder what sob story i can come up with its an older wii i think due to lu3 something or other. does anyone else have a guess what i could try.?

  10. #329
    Junior Member
    Join Date
    Jan 2009
    Posts
    3
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Installed a wad that has now caused banner brick via " sytem files corrupted" message. Have no protection installed ( so stupid ) and cant get access to sytem menu as it hangs on the corrupt message. Have ordered gamecube controller but what else will i need???? Have system menu 3.4e installed. Any help would be great thanks

  11. #330
    Junior Member
    Join Date
    Jan 2010
    Posts
    6
    Thanks
    1
    Thanked 0 Times in 0 Posts
    hy guys i have a wii bricked with black screen .I want to unbrick software not with chip.
    someone knows something answers?

Page 33 of 38 FirstFirst ... 233132333435 ... LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •