Problem with USB Loader GX

Read all the thread but unable to find a solution.

Driver backup on USB Disc using WBFS
USB Loader GX 2.2 (r1100)
249d2x6[56] selected (GAME IOS: 249)
002 fix (default) - YES
"return to" -OFF

Installed cIOS 249d2x[56]

in USB Loader GX, selected the game, press A.
Returns to USB loader GX game list and a second later to HBC


Syschk

Spoiler

sysCheck v2.1.0b13 by Double_A and R2-D2199
...runs on IOS58 (rev 6176).

Region: PAL
System Menu 4.0/4.1E (v54450)
Priilaoder installed
Homebrew Channel 1.0.8 running on IOS58
Hollywood v0x21
Console ID: 97916535
Boot2 v4
Found 98 titles.
Found 52 IOS on this console. 6 of them are stub.

IOS3 (rev 65280): Stub
IOS4 (rev 65280): Stub
IOS9 (rev 54321): Trucha Bug
IOS10 (rev 768): Stub
IOS11 (rev 54321): Trucha Bug
IOS12 (rev 526): No Patches
IOS13 (rev 1032): No Patches
IOS14 (rev 1032): No Patches
IOS15 (rev 1032): No Patches
IOS16 (rev 54321): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS17 (rev 1032): No Patches
IOS20 (rev 54321): Trucha Bug
IOS21 (rev 1039): No Patches
IOS22 (rev 1294): No Patches
IOS28 (rev 1807): No Patches
IOS30 (rev 54321): Trucha Bug
IOS31 (rev 3608): No Patches
IOS33 (rev 3608): No Patches
IOS34 (rev 3608): No Patches
IOS35 (rev 3608): No Patches
IOS36 (rev 54321): Trucha Bug, ES Identify, NAND Access
IOS37 (rev 5663): No Patches
IOS38 (rev 4124): No Patches
IOS40 (rev 3072): Stub
IOS41 (rev 3607): No Patches
IOS43 (rev 3607): No Patches
IOS45 (rev 3607): No Patches
IOS46 (rev 3607): No Patches
IOS48 (rev 4124): No Patches
IOS50 (rev 54321): Trucha Bug
IOS51 (rev 4864): Stub
IOS52 (rev 5888): Stub
IOS53 (rev 5663): No Patches
IOS55 (rev 5663): No Patches
IOS56 (rev 5662): No Patches
IOS57 (rev 5919): No Patches
IOS58 (rev 6176): USB 2.0
IOS60 (rev 54321): Trucha Bug
IOS61 (rev 5662): No Patches
IOS70 (rev 54321): Trucha Bug
IOS80 (rev 54321): Trucha Bug
IOS90 (rev 54321): Trucha Bug
IOS202[60] (rev 65535, Info: hermes-v5.1): Trucha Bug, NAND Access, USB 2.0
IOS222[38] (rev 65535, Info: hermes-v4.0): Trucha Bug, ES Identify, NAND Access, USB 2.0
IOS223[38] (rev 65535, Info: hermes-v4.0): Trucha Bug, ES Identify, NAND Access, USB 2.0
IOS224[57] (rev 65535, Info: hermes-v5.1): Trucha Bug, NAND Access, USB 2.0
IOS236 (rev 54321): Trucha Bug, ES Identify, NAND Access
IOS247[58] (rev 21006, Info: d2x-v6): Trucha Bug, NAND Access, USB 2.0
IOS248[37] (rev 21006, Info: d2x-v6): Trucha Bug, NAND Access, USB 2.0
IOS249[56] (rev 21006, Info: d2x-v6): Trucha Bug, NAND Access, USB 2.0
IOS250[57] (rev 21006, Info: d2x-v6): Trucha Bug, NAND Access, USB 2.0
IOS254 (rev 65281): BootMii
BC v6
MIOS v65535

Report generated on 2011/10/07.

Any help is appreciated.

Thanks
Ref

Quote:

---

Originally Posted by RefPT

Read all the thread but unable to find a solution.

Driver backup on USB Disc using WBFS
USB Loader GX 2.2 (r1100)
249d2x6[56] selected (GAME IOS: 249)
002 fix (default) - YES
"return to" -OFF

Installed cIOS 249d2x[56]

in USB Loader GX, selected the game, press A.
Returns to USB loader GX game list and a second later to HBC


Syschk

Spoiler

sysCheck v2.1.0b13 by Double_A and R2-D2199
...runs on IOS58 (rev 6176).

Region: PAL
System Menu 4.0/4.1E (v54450)
Priilaoder installed
Homebrew Channel 1.0.8 running on IOS58
Hollywood v0x21
Console ID: 97916535
Boot2 v4
Found 98 titles.
Found 52 IOS on this console. 6 of them are stub.

IOS3 (rev 65280): Stub
IOS4 (rev 65280): Stub
IOS9 (rev 54321): Trucha Bug
IOS10 (rev 768): Stub
IOS11 (rev 54321): Trucha Bug
IOS12 (rev 526): No Patches
IOS13 (rev 1032): No Patches
IOS14 (rev 1032): No Patches
IOS15 (rev 1032): No Patches
IOS16 (rev 54321): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS17 (rev 1032): No Patches
IOS20 (rev 54321): Trucha Bug
IOS21 (rev 1039): No Patches
IOS22 (rev 1294): No Patches
IOS28 (rev 1807): No Patches
IOS30 (rev 54321): Trucha Bug
IOS31 (rev 3608): No Patches
IOS33 (rev 3608): No Patches
IOS34 (rev 3608): No Patches
IOS35 (rev 3608): No Patches
IOS36 (rev 54321): Trucha Bug, ES Identify, NAND Access
IOS37 (rev 5663): No Patches
IOS38 (rev 4124): No Patches
IOS40 (rev 3072): Stub
IOS41 (rev 3607): No Patches
IOS43 (rev 3607): No Patches
IOS45 (rev 3607): No Patches
IOS46 (rev 3607): No Patches
IOS48 (rev 4124): No Patches
IOS50 (rev 54321): Trucha Bug
IOS51 (rev 4864): Stub
IOS52 (rev 5888): Stub
IOS53 (rev 5663): No Patches
IOS55 (rev 5663): No Patches
IOS56 (rev 5662): No Patches
IOS57 (rev 5919): No Patches
IOS58 (rev 6176): USB 2.0
IOS60 (rev 54321): Trucha Bug
IOS61 (rev 5662): No Patches
IOS70 (rev 54321): Trucha Bug
IOS80 (rev 54321): Trucha Bug
IOS90 (rev 54321): Trucha Bug
IOS202[60] (rev 65535, Info: hermes-v5.1): Trucha Bug, NAND Access, USB 2.0
IOS222[38] (rev 65535, Info: hermes-v4.0): Trucha Bug, ES Identify, NAND Access, USB 2.0
IOS223[38] (rev 65535, Info: hermes-v4.0): Trucha Bug, ES Identify, NAND Access, USB 2.0
IOS224[57] (rev 65535, Info: hermes-v5.1): Trucha Bug, NAND Access, USB 2.0
IOS236 (rev 54321): Trucha Bug, ES Identify, NAND Access
IOS247[58] (rev 21006, Info: d2x-v6): Trucha Bug, NAND Access, USB 2.0
IOS248[37] (rev 21006, Info: d2x-v6): Trucha Bug, NAND Access, USB 2.0
IOS249[56] (rev 21006, Info: d2x-v6): Trucha Bug, NAND Access, USB 2.0
IOS250[57] (rev 21006, Info: d2x-v6): Trucha Bug, NAND Access, USB 2.0
IOS254 (rev 65281): BootMii
BC v6
MIOS v65535

Report generated on 2011/10/07.

Any help is appreciated.

Thanks
Ref

---

Did you update to GX 2.2 from another revision?
If so, you need to delete the GX config file, and then
reboot GX 2.2 so it can make another config file.

Quote:

---

Originally Posted by bmarlo

Did you update to GX 2.2 from another revision?
If so, you need to delete the GX config file, and then
reboot GX 2.2 so it can make another config file.

---

Still the same but I think it is a USB loader GX issue, as it doesn't load any game.
Alreay deleted in HBC and reinstalled, but the issue remains.

Ref

Quote:

---

Originally Posted by RefPT

Alreay deleted in HBC and reinstalled

Ref

---

You need to delete the config files from your sd/usb device and let it recreate them. Deleting the app from hbc and reinstalling is not going to change the config files. CJizzle has a great guide on how to properly update gx from 1.0 to 2.0....I will see if I can find the link since the dufus didn't put it in his sig yet :p

Edit...OK it's still in the submissions section so I don't think you can access it.

Here's a sneek peek:

Spoiler

Quote:

---

http://code.google.com/p/usbloader-g...cct=1298057563

USB Loader GX v2.2 supports the new features of the latest d2x cIOS as well as Rodries MOD of the Hermes cIOS v5.1.

This guide is meant only to instruct those who wish to update their current version of GX v1.x to GX v2.2, or those who have had issues since updating to GX v2.2. If you have never installed USB Loader GX before, or you want to know about GX paths, settings, etc. have a look at Red_Gh0st’s USB Loader GX guide.
GX v2.2 and its forwarder channel require IOS58 and HBC 1.0.7+ in order to properly run. If you have a lower version of the HBC and/or it is not running on IOS58, read Part 1, otherwise skip to Part 2.

Part 1 - Installation of Homebrew Channel v1.0.8 running on IOS58

If you are unsure which version of the HBC and IOS you are running, launch the HBC then press the Home button. It will show your HBC version and IOS in the upper right hand corner.

IOS58 Installation

If you are certain that IOS58 is installed you can skip to Homebrew Channel 1.0.8 Installation/Reinstallation

Online Installation

1. Download the IOS58 Installer from HERE
2. Extract the download directly to the root of your SD card. After extraction the path should look like this: SD:/apps/ios58-installer/boot.dol
3. Launch HBC and run ios58-installer.
4. Press the Install button.
5. After installation exit homebrew and return to the system menu.

Offline Installation

1. Download IOS58-64-6176.wad from HERE and save it directly to the SD:/wad folder
2. Install IOS58 using MMM or Wad Manager v1.7

Homebrew Channel 1.0.8 Installation/Reinstallation

Note: If you are already using HBC 1.0.8 but it is running from an IOS other than 58, these instructions will allow you to reinstall it so that it will use the correct IOS.

1. Create a folder in the apps directory of your SD card called Update HBC.
2. Download the Hackmii installer from HERE and extract it to your desktop.
3. Inside the Hackmii folder is a file called boot.elf. Copy this file to the folder you just created on your SD card. The path should look like this: SD:/apps/Update HBC/boot.elf
4. Launch HBC and load the Update HBC app. The Hackmii installer will load. Wait a few moments for the 1 to appear, then follow the onscreen prompts to Install the Homebrew Channel. After a successful install, exit back to the HBC.
5. Press the Home button and look in the upper right hand corner of the screen. It should now say 1.0.8 IOS58.

Part 2 – Installation of USB Loader GX v2.2 and forwarder

1. Delete the contents of the SD:/config folder. This folder contains the configuration files for your older version of GX which are not compatible with the newer version.
2. Download the v2.2 GX DOLs from HERE and extract the version you want to use directly to the SD:/apps/usbloader_gx folder. The different versions you see allow GX to boot slightly faster if you select the one that has the cIOS you will be primarily using when running games. If you are unsure, the recommended version is 249. (Don’t worry if you aren’t sure or select the wrong one, as the only advantage is it slightly speeds up the startup process of the loader.)
3. Delete the boot.dol file from SD:/apps/usbloader_gx , then rename the file you just downloaded to boot.dol
4. Download the forwarder channel from HERE and extract it directly to SD:/wad
5. Run to your wii and insert your SD card.
6. Before running GX you need to delete any existing GX channels. You can do this in the Wii’s Data Management screen. After deleting the old channels install the new GX forwarder channel using MMM or Wad manager 1.7

Part 3 (Optional) – Installation of d2x and Rodries MOD

Install d2x v6 using THIS guide.

Install Rodries MOD using THIS page.

Note: A few users have reported that their hard drives are not recognized with GX v2.2 and d2x v6 cIOS. If this is the case for you, delete GXglobal.cfg from the Config folder on your SD card and then reload GX. If you continue to have issues try using the d2x v7 beta1 installer HERE, using the same instructions as when you installed v6. I do not recommend installing the v7 beta without trying v6 first, as it is just that – A BETA. Use this as a last resort.

Credits

Thanks goes out to:
The USB Loader GX team – USB Loader GX
The Bootmii Team – BootMii.org
Wiibrew.org for the IOS58 installer
Red_Gh0st for dealing with a bunch of my questions
My wife for not killing me for being on Wii Hacks so much.

---

Quote:

---

Originally Posted by skellinator

You need to delete the config files from your sd/usb device and let it recreate them. Deleting the app from hbc and reinstalling is not going to change the config files. CJizzle has a great guide on how to properly update gx from 1.0 to 2.0....I will see if I can find the link since the dufus didn't put it in his sig yet :p

Edit...OK it's still in the submissions section so I don't think you can access it.

Here's a sneek peek:

---

Did all these (delete config folder, updated HBC, reinstalled the loader) but keep getting the same error.
Loads the USB Loader GX, select the game, press A on the disc and instead of loading the game, it drives me back to HBC.
Trying to play on CFG, but it gets quite annoying have to restart the wii after each mission...

Thx.

Quote:

---

Originally Posted by skellinator

I will see if I can find the link since the dufus didn't put it in his sig yet :p

---

LOL....added. :D

EDIT: @ RefPT do any other games work in GX?

nop... not one :(
and it was working, although I prefer CFG

Quote:

---

Originally Posted by RefPT

nop... not one :(
and it was working, although I prefer CFG

---

Another user reported a similar issue and reinstalling d2x fixed it. Not sure why or how considering he had d2x in the first place, but it wouldn't hurt to try. Installer HERE.

Original post:

Quote:

---

Originally Posted by Samba Croxyndul Charles

I got gx v2.2 working now. I reinstalled both cIOS 249[56 base]&250[57 base] from a different source and it's working. what I can't figure out is why the d2x versions of the installation guide didn't work when they were the same cIOSes. whatever, driver sf is working great without freezing after missions.

---

Quote:

---

Originally Posted by cjizzle

Another user reported a similar issue and reinstalling d2x fixed it. Not sure why or how considering he had d2x in the first place, but it wouldn't hurt to try. Installer HERE.

Original post:

---

Reinstalled now loader gx and it loads driver but freezes on loadind (controls screen).
I installed d2x (or I think I did), because when loader gx was loading it flashed something like "loading iOS 236...".

How do I check if the d2x is properly installed?

Thx.

Quote:

---

Originally Posted by RefPT

Reinstalled now loader gx and it loads driver but freezes on loadind (controls screen).
I installed d2x (or I think I did), because when loader gx was loading it flashed something like "loading iOS 236...".

How do I check if the d2x is properly installed?

Thx.

---

You are the second user in the past 24 hours that reported GX was using IOS236 to load....that should not be the case. Can you copy and paste the contents of the meta.xml file located in the usbloader_gx folder?

EDIT: Any mods have any ideas on this one?