With no power, you will have no wii. Not powering on does not indicate a brick, it indicates hardware failure. I think you need to figure out how to get something to come on, then since you have boot2, it will be an easy fix if it IS bricked.
Today i had installed bootmii as boot 2. So when i backedup the nand, the wii switched off.
The power cable and everything works but there is no light on the wii and i cant get it to power.
On the SD card i have the Keys and nand backed up. I also still have the bootmii folder from the SD card saved.
Can someone help me with this problem please? Thank You
Try and unplug the power adapter from the wall and from the wii. Let the adapter sit for 15 to 20 minutes not plugged into anything. Then try and plug everything back in. This will reset the power brick and should get the wii some power again. If that doesn't work, there is a different problem with the hardware inside the console.
[spoiler=Click here for useful links]Softmod any Wii guide Yes ANY Wii!!!
FAT32 Hard Drives - Formatting, Loading, Ripping, Playing (recommended USB setup)
Ultimate List of Troublesome Games & Solutions
The Noob's Guide To Getting Help
How to Run & Post a System Check
Blackscreens & Freezes - Causes & Solutions[/spoiler]
And if that doesn't work maybe try to borrow someone else's power adapter just to rule that out as a possibility. Even bricked wii's get power lights of some sort and color. Possibly a blown fuse? Not giving you grief, just throwing ideas out there to help narrow it down. Good luck and let us know how it goes. Merry Christmas!
Hi thank you for your advice. I have taken the power plug off the wall and the wii. I waited for 10 mins and it works fine now! Thank you very much and a HAPPY NEW YEAR!
Glad u got it sorted, thread closed