Results 1 to 8 of 8

Thread: Configurable USB Loader v65

  1. #1

    Configurable USB Loader v65

    Hi
    Have a softmodded wii following the guides on here. When I did it I saw an option to configure the USB loader to return to the USB loader rather than the main channel whenever you wanted to switch games of the USB hardrive. But cant now find how to go back to that option.
    Sorry if this is a bit basic from a newbie but cant find an answer and its probably an easy option that I cant see somewhere
    Thanks

  2. #2
    Junior Member dniMretsaM's Avatar
    Join Date
    May 2010
    Location
    NE Ohio
    Posts
    1,142
    That would have been the Softmod ANY Wii (link in my sig). However, it has changed slightly (now boots to a generic USB Loader Channel that supports WiiFlow, CFG, and GX), but the instructions aren't up to date with the included (I have mentioned it, so it should be fixed soon). BTW, you should update CFG to v70.
    SM 4.1 (v499) - BootMii/IOS v1.5 - HBC 1.1.2 - Priiloader 0.8b6 - d2x v9(r49) - WiiFlow 4.1.1
    [SPOILER=Must read threads]Thinking About Hacking a Wii? Read This First.
    Brick Prevention
    Softmod ANY Wii (updated 03/30/2013)
    How To Run & Post A System Check[/SPOILER][SPOILER=Helpful threads]USB Compatibility List
    FAT32 Formatting
    WiiFlow Guide
    Troublesome Games And Their Solution
    Error Index[/SPOILER]
    Quote Originally Posted by sven
    [16:26:34] i'm never sarcastic.
    [16:26:41] feel free to quote me on that.

  3. #3
    Thanks if I update to v70 do I then get to set that option or now its softmodded under your old guide have I lost that option?
    Also is there a sticky to upgrade to v70?
    Thanks again

  4. #4
    Junior Member dniMretsaM's Avatar
    Join Date
    May 2010
    Location
    NE Ohio
    Posts
    1,142
    Quote Originally Posted by terryduckworth View Post
    Thanks if I update to v70 do I then get to set that option or now its softmodded under your old guide have I lost that option?
    Also is there a sticky to upgrade to v70?
    Thanks again
    No it's not an option from within CFG. It's through Priiloader. Download this file and extract it to the root of your SD card. Then boot to Priiloader and click on Load/Install File. Select the .dol you just downloaded from the list that pops up. Then go into the Priiloader settings and set these options:
    Autoboot: Installed File
    Return to: Autoboot

    That will autoboot you into CFG. As for updating, you can do that from within the CFG settings somewhere.
    SM 4.1 (v499) - BootMii/IOS v1.5 - HBC 1.1.2 - Priiloader 0.8b6 - d2x v9(r49) - WiiFlow 4.1.1
    [SPOILER=Must read threads]Thinking About Hacking a Wii? Read This First.
    Brick Prevention
    Softmod ANY Wii (updated 03/30/2013)
    How To Run & Post A System Check[/SPOILER][SPOILER=Helpful threads]USB Compatibility List
    FAT32 Formatting
    WiiFlow Guide
    Troublesome Games And Their Solution
    Error Index[/SPOILER]
    Quote Originally Posted by sven
    [16:26:34] i'm never sarcastic.
    [16:26:41] feel free to quote me on that.

  5. #5
    I too am struggling getting to autoboot into CFG.

    Will the dol above work for v70?

    Here is how far i got last night before getting stuck :

    I loaded into priiloader and I looked for the usb forwarder.dol.

    it was there and when I clicked on load cfg loaded fine. So I then clicked install
    which it did fine.

    when in priiloader and I run installed file cfg boots fine, all is ok here.

    when I try and set priiloader to autoboot to installed file it doesnt?. My wii just
    loads to the system home screen.

    Thanks

    A

  6. #6
    Banned
    Join Date
    Apr 2009
    Location
    Schenectady,NY
    Posts
    3,759
    Go to your Sd card,On the root of your sd card you will see apps....etc....usb-loader folder.
    go in to the usb-loader folder and open up the Config Text Document and insert this line....return_to_channel = auto
    Exit and save

    See if that Helps.

  7. #7
    I have moved the boot.dol now and set it to autoboot with Priiloader.

    Thanks

    I have one more little question.

    When cfg loader loads I hvae to press A to select USB mass storage, is there anyway this will boot into this without me selecting it.

    Thanks

    Andy

  8. #8
    Banned
    Join Date
    Apr 2009
    Location
    Schenectady,NY
    Posts
    3,759
    Save your Settings.After you choose which Usb Partition you are using.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •