Results 1 to 2 of 2

Thread: Neek2o Setup and installation guide

  1. #1
    New Member
    Join Date
    Oct 2010
    Thanked 4 Times in 1 Post

    Neek2o Setup and installation guide

    For those who have never used any form sneek, installing neek2o on to your wii will allow you to (in simple terms) install another wii onto your external hard drive. By doing this you will have the peace of mind that no matter what you do while in your neek2o wii you cannot brick your real wii. Neek2o is now compatible with bootmii so can be launched as you would launch any usb loader. This means that all vc games, wiiware and gamesaves can be stored and accessed from your hard drive removing the limitations of the 512mb size of the wii nand and reducing wear and tear of the nand by continual adding and removing of channels for wiiware and the likes. An added bonus is that because neek2o runs in an enhanced sneek environment all the backup games that you have stored on your hdd as .wbfs files can be run using the original wii ios as though they were real disks removing the need for custom cios usually required to make backups work, giving you the compatibility you would get from darkcorp without the huge risk involved with modifying original wii ios.
    I hope this helps explain what this setup can do and why it is a huge step forward in wii modding.

    Ok here goes then..Same as usual READ EVERYTHING.

    List of requirements...

    1. External hard drive must be formatted to fat32 with 32kb clusters. If your hdd has multiple partitions you MUST use the FIRST partition.

    2. SD card 16mb is enough or bigger if you prefer but no bigger than 2gb and not sdhc. formatted to fat or fat32.

    3. Modmii version 4.7.6 or higher.

    4. Patience...Do not try to rush this it doesn't take long.

    1. HDD preparation....If like a lot of us your wii has been modded for a whiile then your hdd will be formatted to wbfs, this will need to be changed to fat32 but you don't want to lose or transfer all your backups.....Try this
    The next problem you may come across is that your pc is windows xp and can only format 32gb as fat32 you will need to use this program EaseUS Partition Master Home Edition - Free software downloads and software reviews - CNET .............WARNING MAKE SURE YOU FORMAT THE CORRECT DRIVE/PARTITION You only have yourself to blame if you lose any data.

    2. SD card preperation. Insert sd card into pc go to my computer and right click sdcard. select format from dropdown and pick either fat or fat32.

    3. Grab modmii from - modmii - ModMii v4.8.0 - ModMii - Google Project Hosting

    4. You are now ready to go.

    Launch modmii on pc I won't go through the first instruction cause if you can't follow that bit you have no right trying to go any further.

    Select "S"
    Select "3"
    You now have a choice if you want to load your backup games from usb hdd then choose UNEEK+DI "UD" (this is the method we will be using as it suits most people).
    If you store your backup games and wiiware on sd then choose SNEEK/SNEEK=DI "S/SD"

    Now select "D" this will copy the required sd files (required for all setups) to the modmii folder on your pc.
    Now select "D" again this will copy the hdd files to the modmii folder.

    Select the region you wish to build a nand for. I would recommend you use a nand region the same as your original. If you have backups from different regions you can build another nand later. But I'm sure most of your backups are in the original region of your wii.
    "U" USA
    "J" JAPAN
    "K" KOREAN

    You now have a choice of wii versions I suggest "4.3"

    Now select "Y" to have the homebrew filter channel

    Now select "Y" for cios 249 rev 14 (required for some apps and wiiware)

    Now select whether or not you require NMM. If you use gamecube games select "Y" if not and have no intention of using them select "N"

    Now select "Y" to install priloader to emu nand

    Now select "Y" for emu compatible usb loader joyflow (wiiflow based)

    Now select your emu nand theme (optional)

    Now select what channels you want on emu nand (optional)

    Now select "Y" to buid your nand and file structure folders.

    You will get a popup box saying you are now complete..Just leave it where it is and wait 3 or 4 mins and in the main modmii window it will say at the bottom complete press any key to return to main menu.

    That's it you are now ready to transfer the folders from the modmii folder on your pc to the relevant places..

    Copy the contents of the COPY TO SD folder to the sd and copy the contents of the COPY TO USB to the hdd you prepared in Section 1.


    Use Get on to transfer any iso game files you may have saved on your pc to your fat32 partition. This will create a wbfs folder and install the backups into it in .wbfs format. If any more info is required on this part have a look at

    Plug the hdd into the wii and put the sd card into the wii (both prepared earlier)

    Launch HBC then select postloader and navigate to wad manager, press "a" to load from sd then navigate to wad and install neek2o channel wad.

    Go back to wii system menu and select neek2o as you would any other usb loader. This will launch your emu nand and may take a bit of time on first boot.
    I would recommend a temp sync with home button if the emu nand is not going to be used as your primary nand. Or you will need to re sync to your real nand.
    To return to your true nand and wii system launch the neek2o channel in your emu nand setup. This will reload the original system menu.

    That's you all done.

    Follow the instructions and you will have no problems but if you get stuck just shout up.

    It has been reported that wifi is not very stable so this setup may not be ideal for your online play just yet. Not to much of a problem as this launches just like a usb loader.
    Wifi now works perfectly if you copy the "shared 2" folder from a nand dump of your original nand that had a working wifi setup into the nand of the same region as your original that you are using for neek2o. But don't forget to delete the nandscfg file from the sneek folder on the hdd or the changes won't be recognized.

    Edit............When adding or deleting games from the fat32 partition you must delete the diconfig file from the sneek folder on the hdd and allow it to create a new one when next launched or your changes to the hdd will not be recognised.
    Last edited by happy_highlander; 01-01-2012 at 11:32 AM.

  2. 4 Users Say Thank You to happy_highlander For This Useful Post

  3. #2
    Senior Member
    WiiHacks Staff
    Nancy the Moderator

    VWA, Game Master, News Hound
    Only site donators may send a PM to WiiHacks Staff
    Red_Gh0st's Avatar
    Join Date
    Jul 2009
    Puerto Rico.
    Thanked 2,147 Times in 1,350 Posts
    Approved. Nice guide.

  4. 1 User Says Thank You Red_Gh0st For This Useful Post


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts