Page 1 of 7 123 ... LastLast
Results 1 to 10 of 62

Thread: USB Loader help

  1. #1
    New Member
    Join Date
    Oct 2011
    Location
    Muskogee, OK
    Posts
    29

    USB Loader help

    Yesterday I followed Mauifrog's 4.3u guide VERY carefully, and downloaded EVERYTHING that I saw needed to be. After I got the "APP PACK.ZIP" done, I thought, "this is awesome!". So, I tried loading an iso from my external USB HDD, but nothing. After thinking for a few seconds, I started freaking out. Did I do something wrong? I thought. So today I've been frantically searching online (practically everywhere, hahah) for a few answers. The HBC works picture-perfect. That's not the complaint (obviously). I've also read a few guides elsewhere, and I think one or two were on this site...? Can't quite remember. Anywhoo, here's my main question.

    I have the files for the USB Cfg. Loader on my SD card and I load it through HBC. Well, when I do that, it used to go to a screen, and now, nothing! I've also tried using the USB Loader GX, but that doesn't seem to go too well either... >.>

    Any help would be greatly appreciated. Thank you in advance!

  2. #2
    WiiHacks Staff
    Only Site Donators Can PM Staff
    Senior Moderator
    Game Master
    cjizzle's Avatar
    Join Date
    May 2009
    Location
    Southeast Ohio
    Posts
    6,380
    You could start by posting a syscheck to verify you completed the guide correctly. Guide for syscheck in my sig.

  3. #3
    New Member
    Join Date
    Oct 2011
    Location
    Muskogee, OK
    Posts
    29
    Okay, sorry for such the delayed response. Here's my report:
    [spoiler=syscheck]
    sysCheck v2.1.0b14 by Double_A and R2-D2199
    ...runs on IOS58 (rev 6176).
    Region: NTSC-U
    System Menu 4.0/4.1U (v54449)
    Priilaoder installed
    The drive supports DVDs
    Homebrew Channel 1.0.8 running on IOS58
    Hollywood v0x11
    Console ID: 67709867
    Boot2 v4
    Found 97 titles.
    Found 51 IOS on this console. 5 of them are stub.
    IOS4 (rev 65280): Stub
    IOS9 (rev 54321): Trucha Bug
    IOS10 (rev 768): Stub
    IOS11 (rev 54321): Trucha Bug
    IOS12 (rev 526): No Patches
    IOS13 (rev 1032): No Patches
    IOS14 (rev 1032): No Patches
    IOS15 (rev 1032): No Patches
    IOS16 (rev 54321): Trucha Bug, ES Identify, Flash Access, NAND Access
    IOS17 (rev 1032): No Patches
    IOS20 (rev 54321): Trucha Bug
    IOS21 (rev 1039): No Patches
    IOS22 (rev 1294): No Patches
    IOS28 (rev 1807): No Patches
    IOS30 (rev 54321): Trucha Bug
    IOS31 (rev 3608): No Patches
    IOS33 (rev 3608): No Patches
    IOS34 (rev 3608): No Patches
    IOS35 (rev 3608): No Patches
    IOS36 (rev 65535): Trucha Bug, ES Identify, NAND Access
    IOS37 (rev 5663): No Patches
    IOS38 (rev 4124): No Patches
    IOS40 (rev 3072): Stub
    IOS41 (rev 3607): No Patches
    IOS43 (rev 3607): No Patches
    IOS45 (rev 3607): No Patches
    IOS46 (rev 3607): No Patches
    IOS48 (rev 4124): No Patches
    IOS50 (rev 54321): Trucha Bug
    IOS51 (rev 4864): Stub
    IOS52 (rev 5888): Stub
    IOS53 (rev 5663): No Patches
    IOS55 (rev 5663): No Patches
    IOS56 (rev 5662): No Patches
    IOS57 (rev 5919): No Patches
    IOS58 (rev 6176): USB 2.0
    IOS60 (rev 54321): Trucha Bug
    IOS61 (rev 5662): No Patches
    IOS70 (rev 54321): Trucha Bug
    IOS80 (rev 6943): No Patches
    IOS90 (rev 54321): Trucha Bug
    IOS202[60] (rev 65535, Info: hermes-v5.1): Trucha Bug, NAND Access, USB 2.0
    IOS222[38] (rev 65535, Info: hermes-v4.0): Trucha Bug, ES Identify, NAND Access, USB 2.0
    IOS223[38] (rev 65535, Info: hermes-v4.0): Trucha Bug, ES Identify, NAND Access, USB 2.0
    IOS224[57] (rev 65535, Info: hermes-v5.1): Trucha Bug, NAND Access, USB 2.0
    IOS236 (rev 65535): Trucha Bug, ES Identify, NAND Access
    IOS247[37] (rev 21006, Info: d2x-v6): Trucha Bug, NAND Access, USB 2.0
    IOS248[56] (rev 21006, Info: d2x-v6): Trucha Bug, NAND Access, USB 2.0
    IOS249[56] (rev 20, Info: rev 20): Trucha Bug, NAND Access, USB 2.0
    IOS250 (rev 65535): Trucha Bug, NAND Access, USB 2.0
    IOS254 (rev 65281): BootMii
    BC v6
    MIOS v4
    Report generated on 2011/10/23.[/spoiler]

    Okay, I've looked up another guide for the ACTIVE and PRIMARY partitioning for the Western Digital My Book Essential 1 Terabyte; did that. But the same problem keeps on coming up! I run USB Loader GX either through HBC or Channel, and I leave it off (HDD, I mean). I turn it on when the message states: "Waiting for Slow HDD: 20 secs left". I plug it in (left back port) and turn it on, then 7 secs later, the screen freezes. I'm really desperate for any answer(s) to this question, haha.

    Thank you in advance, as always, and sorry for the triple-post but this was more info that needed to be put-up.
    Last edited by skellinator; 10-23-2011 at 04:00 PM. Reason: Use the edit button

  4. #4
    WiiHacks Staff
    Only Site Donators Can PM Staff
    Senior Moderator
    Game Master
    cjizzle's Avatar
    Join Date
    May 2009
    Location
    Southeast Ohio
    Posts
    6,380
    Honestly bud it has been quite some time since I have used a WBFS formatted drive. That format is pretty well obsolete. I would suggest going with FAT32, Guide HERE. Also, your syscheck shows that you did not fully complete maui's softmod guide, particularly the installation of cIOS (unless you intentionally overwrote 249 and 250 with other versions).

  5. #5
    New Member
    Join Date
    Oct 2011
    Location
    Muskogee, OK
    Posts
    29
    Thank you!
    I'll look up the guide ASAP. I just really want the USB thing to work! It's really frustrating after so many attempts...
    And I'll re-do his cIOS part. I must've replaced them or something in this process that I deem a "mess".

    Again, thank you SO much! I really appreciate it!

  6. #6
    Did you use something like backup manager to convert the iso? That was my issue. Download backup manager and use that to transfer the iso to your hdd.

  7. #7
    New Member
    Join Date
    Oct 2011
    Location
    Muskogee, OK
    Posts
    29
    Will that work for a FAT32 HDD drive? If so, I'll do it. Whenever I run WBFS Manager 3.0, it doesn't recognize my FAT32 drive because of it's format, sadly. And when I try the old-fashioned "click-and-drag" technique, it says it's "too big of a file" even though it's 999 GB...wth? u.u

    What do I convert it to, what format? (the iso, I mean).

  8. #8
    It auto converts the file so no type is needed. Yes it works on fat32 thats what my thumb drive is.

  9. #9
    WiiHacks Staff
    Only Site Donators Can PM Staff
    Senior Moderator
    Game Master
    cjizzle's Avatar
    Join Date
    May 2009
    Location
    Southeast Ohio
    Posts
    6,380
    FYI Wii Backup Manager is referred to in the FAT32 guide I linked you to. Go back and read it again.

  10. #10
    New Member
    Join Date
    Oct 2011
    Location
    Muskogee, OK
    Posts
    29
    Alrighty! I've converted it onto my drive and have it plugged up.
    @cjizzle: I re-did Mauifrog's tut (the part with the cIOS files), and I'm going to re-do a system check and upload it on here again. I tried running USB Loader GX twice, and got the same results that I usually get. Any tips?

    [SPOILER=New syscheck]

    sysCheck v2.1.0b14 by Double_A and R2-D2199
    ...runs on IOS58 (rev 6176).
    Region: NTSC-U
    System Menu 4.0/4.1U (v54449)
    Priilaoder installed
    The drive supports DVDs
    Homebrew Channel 1.0.8 running on IOS58
    Hollywood v0x11
    Console ID: 67709867
    Boot2 v4
    Found 96 titles.
    Found 51 IOS on this console. 5 of them are stub.
    IOS4 (rev 65280): Stub
    IOS9 (rev 54321): Trucha Bug
    IOS10 (rev 768): Stub
    IOS11 (rev 54321): Trucha Bug
    IOS12 (rev 526): No Patches
    IOS13 (rev 1032): No Patches
    IOS14 (rev 1032): No Patches
    IOS15 (rev 257): Trucha Bug, ES Identify, Flash Access, NAND Access
    IOS16 (rev 54321): Trucha Bug, ES Identify, Flash Access, NAND Access
    IOS17 (rev 1032): No Patches
    IOS20 (rev 54321): Trucha Bug
    IOS21 (rev 1039): No Patches
    IOS22 (rev 1294): No Patches
    IOS28 (rev 1807): No Patches
    IOS30 (rev 54321): Trucha Bug
    IOS31 (rev 3608): No Patches
    IOS33 (rev 3608): No Patches
    IOS34 (rev 3608): No Patches
    IOS35 (rev 3608): No Patches
    IOS36 (rev 54321): Trucha Bug, ES Identify, NAND Access
    IOS37 (rev 5663): No Patches
    IOS38 (rev 4124): No Patches
    IOS40 (rev 3072): Stub
    IOS41 (rev 3607): No Patches
    IOS43 (rev 3607): No Patches
    IOS45 (rev 3607): No Patches
    IOS46 (rev 3607): No Patches
    IOS48 (rev 4124): No Patches
    IOS50 (rev 54321): Trucha Bug
    IOS51 (rev 4864): Stub
    IOS52 (rev 5888): Stub
    IOS53 (rev 5663): No Patches
    IOS55 (rev 5663): No Patches
    IOS56 (rev 5662): No Patches
    IOS57 (rev 5919): No Patches
    IOS58 (rev 6176): USB 2.0
    IOS60 (rev 54321): Trucha Bug
    IOS61 (rev 5662): No Patches
    IOS70 (rev 54321): Trucha Bug
    IOS80 (rev 54321): Trucha Bug
    IOS90 (rev 54321): Trucha Bug
    IOS202[60] (rev 65535, Info: hermes-v5.1): Trucha Bug, NAND Access, USB 2.0
    IOS222[38] (rev 65535, Info: hermes-v4.0): Trucha Bug, ES Identify, NAND Access, USB 2.0
    IOS223[38] (rev 65535, Info: hermes-v4.0): Trucha Bug, ES Identify, NAND Access, USB 2.0
    IOS224[57] (rev 65535, Info: hermes-v5.1): Trucha Bug, NAND Access, USB 2.0
    IOS236 (rev 54321): Trucha Bug, ES Identify, NAND Access
    IOS247[37] (rev 21006, Info: d2x-v6): Trucha Bug, NAND Access, USB 2.0
    IOS248[56] (rev 21006, Info: d2x-v6): Trucha Bug, NAND Access, USB 2.0
    IOS249[38] (rev 21006, Info: d2x-v6): Trucha Bug, ES Identify, NAND Access
    IOS250[57] (rev 21006, Info: d2x-v6): Trucha Bug, NAND Access, USB 2.0
    IOS254 (rev 65281): BootMii
    BC v6
    MIOS v65535
    Report generated on 2011/10/23.[/SPOILER]
    Last edited by Brian; 10-23-2011 at 04:23 PM.

Page 1 of 7 123 ... LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •