Results 1 to 9 of 9

Thread: WBFS fails to initialize (Not read HD - SysCheck included)

  1. #1

    WBFS fails to initialize (Not read HD - SysCheck included)

    I have a 4.2U Wii, with a 1TB Western Digital drive that has been softmodded/in use for the last 2 years. I have searched all over for possible clues as to why the Wii won't recognize my drive anymore. I have tested my friends HD (SeaGate 500gb) which also is working on my Wii with no luck. I have bought another drive, reformatted with 2 partitions, first is 1GB of Fat32, the other half 465GB with WBFS manager and nothing. My wii isn't reading anything... I have reformatted my 1GB Kings SD card and setup WiiFlow again with no luck. The SeaGate drive reads fine on the computer, and I'm able to load the 1TB WD fine on my PC via WBFS Manager. I've searched through these forums and done IOS updates and see if that works, no luck. I'm thinking of virginizing to 4.3 and starting from scratch - Below is my syscheck, anybody have any clues before I go down this path? Thanks in advance for your help!

    [spoiler]sysCheck v2.0 by Double_A
    ...runs on IOS61 (rev 5405).

    Region: NTSC-U
    System Menu 4.2 (v481)
    Hollywood v0x11
    Console ID: xxxxxxxxxxxx
    Boot2 v4

    Found 115 titles.
    Found 38 IOS on this console. 8 of them are stub.

    IOS4 (rev 65280): Stub
    IOS9 (rev 778): No Patches
    IOS10 (rev 768): Stub
    IOS11 (rev 256): Stub
    IOS12 (rev 269): No Patches
    IOS13 (rev 273): No Patches
    IOS14 (rev 520): No Patches
    IOS15 (rev 523): No Patches
    IOS16 (rev 512): Stub
    IOS17 (rev 775): No Patches
    IOS20 (rev 256): Stub
    IOS21 (rev 782): No Patches
    IOS22 (rev 1037): No Patches
    IOS28 (rev 1550): No Patches
    IOS30 (rev 2816): Stub
    IOS31 (rev 3349): No Patches
    IOS33 (rev 3091): No Patches
    IOS34 (rev 3348): No Patches
    IOS35 (rev 3349): No Patches
    IOS36 (rev 3351): Trucha Bug, ES Identify, NAND Access
    IOS37 (rev 3869): No Patches
    IOS38 (rev 3867): No Patches
    IOS50 (rev 5120): Stub
    IOS51 (rev 4864): Stub
    IOS53 (rev 5406): Trucha Bug
    IOS55 (rev 5406): Trucha Bug
    IOS56 (rev 5405): Trucha Bug
    IOS57 (rev 5661): No Patches
    IOS60 (rev 6174): Trucha Bug
    IOS61 (rev 5405): No Patches
    IOS70 (rev 6687): Trucha Bug, NAND Access
    IOS202 (rev 65535): Trucha Bug, NAND Access, USB 2.0
    IOS222 (rev 65535): Trucha Bug, ES Identify, NAND Access, USB 2.0
    IOS223 (rev 4): Trucha Bug, ES Identify, NAND Access, USB 2.0
    IOS224 (rev 65535): Trucha Bug, NAND Access, USB 2.0
    IOS249 (rev 21006): Trucha Bug, NAND Access, USB 2.0
    IOS250 (rev 21006): Trucha Bug, NAND Access, USB 2.0
    IOS254 (rev 65281): BootMii
    BC v6
    MIOS v10

    Report generated on 2010/07/07.[/spoiler]
    Last edited by skellinator; 08-14-2011 at 05:14 AM. Reason: Forgot to mention, I also have my NAND backup before it was softmod. Maybe go down this route if options are left.

  2. #2
    I also did the CIOS update posted through this link - No dice.
    http://www.wiihacks.com/other-faq-gu...tml#post580025

    I appreciate the help!

  3. #3
    Senior Member
    Retired WiiHacks Staff
    narse1979's Avatar
    Join Date
    Mar 2010
    Location
    Southern Fairy Land
    Posts
    7,489
    Dont update to 4.3 there is no point. You need to install ios 58 and run hackmii again to re install HBC for starters.

    Have you set the wbfs partition to primary and active..?


  4. #4
    I installed IOS 58, and redid BOOTMI installing HBC and Boot2. I also had the WBFS partition as primary, but not active. I set it as boot primary and active, and it still won't read the drive. Now also, the BootMii sequence is coming up everytime I power the Wii, I'd like to stop that

    Here is the newest SysCheck after the updates:

    [spoiler]sysCheck v2.0 by Double_A
    ...runs on IOS58 (rev 6175).

    Region: NTSC-U
    System Menu 4.2 (v481)
    Hollywood v0x11
    Console ID: xxxxxxx
    Boot2 v4

    Found 116 titles.
    Found 39 IOS on this console. 8 of them are stub.

    IOS4 (rev 65280): Stub
    IOS9 (rev 778): No Patches
    IOS10 (rev 768): Stub
    IOS11 (rev 256): Stub
    IOS12 (rev 269): No Patches
    IOS13 (rev 273): No Patches
    IOS14 (rev 520): No Patches
    IOS15 (rev 523): No Patches
    IOS16 (rev 512): Stub
    IOS17 (rev 775): No Patches
    IOS20 (rev 256): Stub
    IOS21 (rev 782): No Patches
    IOS22 (rev 1037): No Patches
    IOS28 (rev 1550): No Patches
    IOS30 (rev 2816): Stub
    IOS31 (rev 3349): No Patches
    IOS33 (rev 3091): No Patches
    IOS34 (rev 3348): No Patches
    IOS35 (rev 3349): No Patches
    IOS36 (rev 3351): Trucha Bug, ES Identify, NAND Access
    IOS37 (rev 3869): No Patches
    IOS38 (rev 3867): No Patches
    IOS50 (rev 5120): Stub
    IOS51 (rev 4864): Stub
    IOS53 (rev 5406): Trucha Bug
    IOS55 (rev 5406): Trucha Bug
    IOS56 (rev 5405): Trucha Bug
    IOS57 (rev 5661): No Patches
    IOS58 (rev 6175): No Patches
    IOS60 (rev 6174): Trucha Bug
    IOS61 (rev 5405): No Patches
    IOS70 (rev 6687): Trucha Bug, NAND Access
    IOS202 (rev 65535): Trucha Bug, NAND Access, USB 2.0
    IOS222 (rev 65535): Trucha Bug, ES Identify, NAND Access, USB 2.0
    IOS223 (rev 4): Trucha Bug, ES Identify, NAND Access, USB 2.0
    IOS224 (rev 65535): Trucha Bug, NAND Access, USB 2.0
    IOS249 (rev 21006): Trucha Bug, NAND Access, USB 2.0
    IOS250 (rev 21006): Trucha Bug, NAND Access, USB 2.0
    IOS254 (rev 65281): BootMii
    BC v6
    MIOS v10

    Report generated on 2010/07/07.[/spoiler]

    Thanks for the help!
    Last edited by skellinator; 08-14-2011 at 05:14 AM.

  5. #5
    Hi, Any other suggestions? I'm thinking that if 4.3U is not the way to go, I can reload my original NAND and start from scratch - Appreciate the feedback (any)

  6. #6
    WiiHacks Staff
    Only Site Donators Can PM Staff
    Senior Moderator
    Game Master
    cjizzle's Avatar
    Join Date
    May 2009
    Location
    Southeast Ohio
    Posts
    6,381
    Quote Originally Posted by pito6pulgadas View Post
    Hi, Any other suggestions? I'm thinking that if 4.3U is not the way to go, I can reload my original NAND and start from scratch - Appreciate the feedback (any)
    The system menu version has nothing to do with usb loading. I'm assuming that you are using wiiflow only? Have you tried any other loaders?

  7. #7
    Thanks for the response cjizzle. Yeah, I've tried USB Loader GX, and then tried Configurable USB Loader, yet no dice. The Configurable USB Loader was attempted due to another thread suggesting that worked for someone else with the same issue, didn't work for me

  8. #8
    WiiHacks Staff
    Only Site Donators Can PM Staff
    Senior Moderator
    Game Master
    cjizzle's Avatar
    Join Date
    May 2009
    Location
    Southeast Ohio
    Posts
    6,381
    Try setting your default IOS in your loaders to 222 and switch the usb slot you are using on the wii to the "top" one (or the innermost port)

  9. #9
    Set WiiFlow and Configurable USB Loader to run IOS 222 without any luck. Both are unable to detect the USB drive. Yes, set the USB cable to the top slot (My wii is flat, not on it's side standing)

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •