Results 1 to 4 of 4

Thread: Bricked 4.3E with black screen of death

  1. #1

    Bricked 4.3E with black screen of death

    Hi, after accidently installing Hermes slot 223 (base 236) using IOS 60 v1674 the wii would not reboot.

    I have bootmii (installed as IOS) backup of the NAND on a SDcard

    Softmods already done were
    - patched IOS236 with IOS-36-64-v3351
    - d2x v2.2 - IOS248 with IOS56-64-v5661
    - IOS247 with IOS57-64-v5918
    - slot 222

    Is there anyway I can unbrick it?

  2. #2
    New Member
    Join Date
    Feb 2011
    Location
    Geelong, Australia
    Posts
    172
    Do you have priiloader/preloader? You can check this by holding the reset button then turning on wii but keep holding it down until a menu appears. If nothing comes up after 5-10 seconds then just let go.

  3. #3
    No i don't have priiloader installed

    Is it as good as dead? or is there a boot disc i can use?

  4. #4
    Senior Member
    DA KINE WiiHacker
    mauifrog's Avatar
    Join Date
    May 2009
    Posts
    9,198
    Quote Originally Posted by sgrantham View Post
    Hi, after accidently installing Hermes slot 223 (base 236) using IOS 60 v1674 the wii would not reboot.

    I have bootmii (installed as IOS) backup of the NAND on a SDcard

    Softmods already done were
    - patched IOS236 with IOS-36-64-v3351
    - d2x v2.2 - IOS248 with IOS56-64-v5661
    - IOS247 with IOS57-64-v5918
    - slot 222

    Is there anyway I can unbrick it?
    This should not brick your wii. Test your wiimote, do they power the wii on? Test savemiifrii, does it load the recovery menu?
    Ipsa scientia potestas est.


    Warning: Piracy is NOT supported. Word your questions carefully.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •