Results 1 to 9 of 9

Thread: Problem - Failed to load IOS

  1. #1

    Problem - Failed to load IOS

    Hello , I speak spanish , but I use the google translator to communicate my problem.

    I looked at every possible solution but it don't run for me. I get the following message.

    cBoot2 DOL loader v16
    IOS Version 2 v16 0x00020010
    Failed to load IOS.

    All this after putting data BootMii and more in SD and then put it on the Wii and turn on the wii.
    Last edited by nhurf; 07-08-2011 at 02:16 AM.

  2. #2
    WiiHacks Staff
    Only Site Donators Can PM Staff

    Junior Moderator
    Bliepo's Avatar
    Join Date
    Nov 2009
    Location
    On your harddrive (file name: Bliepo.crazy)
    Posts
    1,583
    I take it you wii is fully bricked and you do not have a NAND back-up?
    Awesome sig picture does not work
    Brick Prevention- Things you should never do | Ignoring advice and bricking | Be a jedi, donate
    Guide: Softmod ANY wii | How to post a system check | Loading and Playing Wii Backup Games from USB HDD (softmod only)
    System Menu X (IOS150, E) | HBC 1.08 (IOS58) | bootmii/boot2v4 | priiloader 0.7 | cIOSX rev21d2x_v6 (main base IOS 57) | cIOS 223 (IOS 37 + 38 merged) | USB Loader GX 2.2

  3. #3

    Full brick

    I have not a nand BACK-UP

  4. #4
    WiiHacks Staff
    Only Site Donators Can PM Staff

    Junior Moderator
    Bliepo's Avatar
    Join Date
    Nov 2009
    Location
    On your harddrive (file name: Bliepo.crazy)
    Posts
    1,583
    Do you have the keys of this particular wii?
    Awesome sig picture does not work
    Brick Prevention- Things you should never do | Ignoring advice and bricking | Be a jedi, donate
    Guide: Softmod ANY wii | How to post a system check | Loading and Playing Wii Backup Games from USB HDD (softmod only)
    System Menu X (IOS150, E) | HBC 1.08 (IOS58) | bootmii/boot2v4 | priiloader 0.7 | cIOSX rev21d2x_v6 (main base IOS 57) | cIOS 223 (IOS 37 + 38 merged) | USB Loader GX 2.2

  5. #5
    nightstah
    Guest
    How old is the Wii, did you have BootMii installed and if so, as IOS or boot2?

  6. #6
    Senior Member
    DA KINE WiiHacker
    mauifrog's Avatar
    Join Date
    May 2009
    Posts
    9,198
    Load bootmii and make a nand backup
    Use this tool to format the nand.bin
    GBAtemp.net > ohneswanzenegger (Wii Entry -- PC Software)
    After you format it install system menu 4.1
    Then when it is done verify the nand.bin with nandbincheck
    Code:
    nandbincheck nand.bin -fs -all -v
    GBAtemp.net > nandBinCheck (Wii Entry -- PC Software)
    Then copy your new nand.bin to your sd card
    Load bootmii and restore the nand.bin.
    Ipsa scientia potestas est.


    Warning: Piracy is NOT supported. Word your questions carefully.

  7. #7
    Quote Originally Posted by Bliepo View Post
    Do you have the keys of this particular wii?
    What keys?

    Quote Originally Posted by nightstah View Post
    How old is the Wii, did you have BootMii installed and if so, as IOS or boot2?
    My wii have got two or three years old. BootMii installed? Yes. Ios - 249,250.

    Quote Originally Posted by mauifrog View Post
    Load bootmii and make a nand backup
    Use this tool to format the nand.bin
    GBAtemp.net > ohneswanzenegger (Wii Entry -- PC Software)
    After you format it install system menu 4.1
    Then when it is done verify the nand.bin with nandbincheck
    Code:
    nandbincheck nand.bin -fs -all -v
    GBAtemp.net > nandBinCheck (Wii Entry -- PC Software)
    Then copy your new nand.bin to your sd card
    Load bootmii and restore the nand.bin.
    Thanks for your help, but I can not copy Nand, I have got full brick, and when I put cBoot2 or BootMii in SD and I turn on wii and then it appears this error.

  8. #8
    WiiHacks Staff
    Only Site Donators Can PM Staff

    Junior Moderator
    Bliepo's Avatar
    Join Date
    Nov 2009
    Location
    On your harddrive (file name: Bliepo.crazy)
    Posts
    1,583
    You must first make a NAND back-up using bootmii, even if it is bricked.
    Awesome sig picture does not work
    Brick Prevention- Things you should never do | Ignoring advice and bricking | Be a jedi, donate
    Guide: Softmod ANY wii | How to post a system check | Loading and Playing Wii Backup Games from USB HDD (softmod only)
    System Menu X (IOS150, E) | HBC 1.08 (IOS58) | bootmii/boot2v4 | priiloader 0.7 | cIOSX rev21d2x_v6 (main base IOS 57) | cIOS 223 (IOS 37 + 38 merged) | USB Loader GX 2.2

  9. #9
    Quote Originally Posted by Bliepo View Post
    You must first make a NAND back-up using bootmii, even if it is bricked.
    Ahh! Ok, Thank you.
    Then I tell you the result.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •