Page 1 of 4 123 ... LastLast
Results 1 to 10 of 34

Thread: EA Sports Active 2

  1. #1

    EA Sports Active 2

    I bought EA Sports Active 2 (with usb and heart rate monitor)

    I'm on 4.2 will Homebrew so i dont want to run the update with the Original Game

    I have tried running it with USB loader GX and CFG Loader v60, but the EA USB device isnt working..

    Any suggestions? I have tried running with ISO 249 but i cant use the heart rate monitor

  2. #2
    New Member summersyn's Avatar
    Join Date
    May 2010
    West Coast, CA
    To use USB devices, you need to run with Hermes 222. Follow the link in my signature. This should work.
    Give credit where credit is due. If it helps you, click "thanks" on ANY guide I link.

  3. #3
    Any luck with this I can not get mi wii to detectmy usb drive for the game, I installed hermes up to step 11 not sure if I need to do 12.
    Did you get yours going ste105?

  4. #4
    I installed Hermes V4 and V5... Tried running the game with ISO249 and ISO222.

    Still not working... I'll try other ISO's tomorrow... I'll post if i get it working

  5. #5
    summersyn is right. I just got the usb to connect to the heart monitor using hermes 222 ios. I'm running usb loader gx on 4.1u

    The EA Active 2 iso needed the 002 fix and ios 222 to run properly.

  6. #6
    First i installed Custom IOSx Rev 21, then i tested the game with both USB loader V2 and CFG v60

    Then I installed Hermes v4 then i installed Hermes 5.1 admittedly without testing in between installing 4 and v5.1 (After reading Summersyn's guide i should have)

    The installation of Custom IOSx Rev 21 / Hermes v4 + Hermes v5.1 was before i got the reply from Summersyn.

    Can i revert back to Hermes v4 just by installing again? Any suggestions would be appreciated

  7. #7
    Maybe my Softmods are out of date in some way... im going to try the attached step from the guide

    Should i downgrade to 4.1? im on 4.2 at present?
    Softmods with HOMEBREW CHANNEL installed If you already have a softmod with HBC installed, you can update your softmod with this guide.

    Note: 4.3 wiis can skip installation of ios58 and 61, and simply load Hackmii from the HBC.

    Backup and Format your sd-card
    Extract to sd:\
    Load the HomeBrew Channel
    Launch Multi-Mod Manager -MMM will load

    -Select Wad Manager -Press A
    -Press 1, -press A -Install all wads
    -IOS58 and IOS61 will install
    -Press "any button"
    -Press 2- load "App Manager"
    -Select hackmii_installer_v0.8 -Press A
    Hackmii Installer Loads

  8. #8
    New Member summersyn's Avatar
    Join Date
    May 2010
    West Coast, CA
    The system menu (more then likely) does not affect your situation. You can install Hermes v4 right over v5, so no worries. Pythagoras above says he got it working with v4 and the 002 fix, so try that out.
    Give credit where credit is due. If it helps you, click "thanks" on ANY guide I link.

  9. #9

    I took your advice and installed Install "Custom IOS 222 and select IOS38" + "Custom IOS 223 and select IOS37 merged with IOS38"

    Its still not working. Maybe it doesnt have enough power. I use a Western digital passport drive that is powered by the wii.

    Im going to see if i can free up an old drive that has its own power supply and retry.

    P.S thanks for you help with this

  10. #10
    Its working well from the original disc anyway.

    Ok i followed this Guide from top to bottom

    since i blocked updates with Priiloader i can not use the original game disc.... USB CFG still wont work for me, but it might be down to my harddrive being powered by the wii itself

    Thanks for all your help

Page 1 of 4 123 ... LastLast


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts