Results 1 to 6 of 6

Thread: USB Loader problem

  1. #1

    Exclamation USB Loader problem

    HI all
    here's my syscheck


    [SPOILER="syscheck"]

    sysCheck v2.0 by Double_A
    ...runs on IOS58 (rev 6175).

    Region: NTSC-U
    System Menu 4.1 (v449)
    Hollywood v0x11
    Console ID: 76171123
    Boot2 v3

    Found 64 titles.
    Found 42 IOS on this console. 1 of them are stub.

    IOS4 (rev 65280): Stub
    IOS9 (rev 54321): Trucha Bug
    IOS11 (rev 54321): Trucha Bug
    IOS12 (rev 269): No Patches
    IOS13 (rev 273): No Patches
    IOS14 (rev 520): No Patches
    IOS15 (rev 523): No Patches
    IOS16 (rev 54321): Trucha Bug, ES Identify, Flash Access, NAND Access
    IOS17 (rev 775): No Patches
    IOS20 (rev 54321): Trucha Bug
    IOS21 (rev 782): No Patches
    IOS22 (rev 1037): No Patches
    IOS28 (rev 1550): No Patches
    IOS30 (rev 54321): Trucha Bug
    IOS31 (rev 3608): No Patches
    IOS33 (rev 3091): No Patches
    IOS34 (rev 3348): No Patches
    IOS35 (rev 3349): No Patches
    IOS36 (rev 54321): Trucha Bug, ES Identify, NAND Access
    IOS37 (rev 3869): No Patches
    IOS38 (rev 4123): No Patches
    IOS50 (rev 54321): Trucha Bug
    IOS53 (rev 5406): No Patches
    IOS55 (rev 5406): No Patches
    IOS56 (rev 5662): No Patches
    IOS57 (rev 5918): No Patches
    IOS58 (rev 6175): No Patches
    IOS60 (rev 54321): Trucha Bug
    IOS61 (rev 5661): No Patches
    IOS70 (rev 54321): Trucha Bug
    IOS80 (rev 54321): Trucha Bug
    IOS90 (rev 54321): Trucha Bug
    IOS202 (rev 65535): Trucha Bug, NAND Access, USB 2.0
    IOS222 (rev 4): Trucha Bug, ES Identify, NAND Access, USB 2.0
    IOS223 (rev 4): Trucha Bug, ES Identify, NAND Access, USB 2.0
    IOS224 (rev 65535): Trucha Bug, NAND Access, USB 2.0
    IOS236 (rev 1): Trucha Bug, ES Identify, NAND Access
    IOS247 (rev 20): Trucha Bug, NAND Access, USB 2.0
    IOS248 (rev 20): Trucha Bug, NAND Access, USB 2.0
    IOS249 (rev 19): Trucha Bug, ES Identify, NAND Access, USB 2.0
    IOS250 (rev 65535): Trucha Bug, ES Identify, NAND Access, USB 2.0
    IOS254 (rev 65281): BootMii
    BC v2
    MIOS v65535

    Report generated on 2011/01/06.


    [/SPOILER]


    USB devices:
    1. WD 250 GB, PATA, with generic USB casing. //not shown in the compatibility list.
    first try
    partition 1: FAT32. contains:
    \wbfs\SVME01.wbfs
    \music\song.mp3 (to test with MPlayer CE).
    partition 2: NTFS, my personal data.

    second try:
    partition 1: WBFS. contains:
    SVME01.wbfs
    partition 2: NTFS, my personal data.

    2. IPOD 5G 30GB
    partition: FAT 32. contains
    \ipod folders
    \wbfs\SVME01.wbfs

    3. Kingston 512MB SD card, using Generic Card Reader.
    first try:
    partition: FAT32. contains
    \wbfs\SVME01.wbfs

    2nd try:
    partition: WBFS. contains
    SVME01.wbfs


    I have tried the following USB loaders
    1. USB Loader GX, latest
    2. CFG USB Loader v62, IOS 249 and also 222
    3. WiiFlow, latest ver

    none of them can detect my USB device.
    e.g - for device 1
    1. CFG Loader hangs at 249[FRAG]
    2. USB Loader GX hangs.
    3. wiiflow hangs

    for device 2 and device 3:
    1. USB Loader GX display msg that it cant mount, or it is waiting for slow usb device.
    2. CFG loader firstly hang at 249[FRAG], then when the device is disconnected, it went to screen showing waiting for device with 30 sec timeout. when the device is connected back, it stops counting, etc.

    other observations:
    1. when using MPLayer CE, it can detect music/media files in device 1-FAT32, and device 1-NTFS.
    but cannot detect files in device 2 and device 3-FAT32 (unable to mount FAT32).



    another qeustions.
    my another SD card contains boot.dol and startup.elf in the root. when it is plugged when wii boots, it always go to cboot2 and load MMM. is it possible to bypass this even when the SDcard is always plugged in at startup? should i just delete startup.elf???

    i'm very new in this. please advice.

  2. #2
    New Member bubba949's Avatar
    Join Date
    Jul 2010
    Location
    UK, Leeds
    Posts
    347
    Want a Userbar? Look here

    <-- Hit thanks if i helped in some way.

  3. #3
    New Member bubba949's Avatar
    Join Date
    Jul 2010
    Location
    UK, Leeds
    Posts
    347
    Secondly if you dont want MMM to automatically load just remove it from your SD and keep it on your computer or use this version which you just load from Homebrew Browser - Attachment 3757
    Want a Userbar? Look here

    <-- Hit thanks if i helped in some way.

  4. #4
    Member WhiteShad0wX's Avatar
    Join Date
    Jun 2010
    Location
    I'm right here
    Posts
    1,615
    @bubba - you should combine your posts next time
    @OP - just rename the bootmii folder on the sd card, or back it up to your pc and then delete it
    See the Thanks button over there?
    <================================= Click it

  5. #5
    New Member bubba949's Avatar
    Join Date
    Jul 2010
    Location
    UK, Leeds
    Posts
    347
    Quote Originally Posted by us3rname View Post
    @bubba - you should combine your posts next time
    Will do just forgot, thanks.
    Want a Userbar? Look here

    <-- Hit thanks if i helped in some way.

  6. #6
    Hello First of all make sure the usb drive is plugged in before the wii is turned on and is plugged into the right usb slot which is when upright the closest one to the edge it will not work in the other one pretty sure usb loader GX will only read a WBFS partition and as for CFG i had a problem not finding any games and it was because it was reading the wrong partiton go to options and make sure its loading the partition with the games on it other wise you may have cIOS installed incorrectly, out of date, or missing. Possibly formatted the SD card or USB incorrectly, is unsupported, or not enough space gx and cfg im pretty sure will only work with cIOS38rev14 and up. As for your sd card try removing the boot.dol and save it to your computer then put the sd card back in and see if that fixes it if not put the file back on the sd. If you have priiloader installed you can set that to auto boot the system menu that may also fix it.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •