WiiKey 2 Startup Problem
Thanks to all who read...
I installed the WiiKey 2 in a brand new D2E unit. I have connected +3v, Gnd, A,B,C,G. I have verified 3.3v on the WiiKey 2 board. Using a continuity meter, I verified good connections and no shorts with all surrounding pins/traces on the drive.
On power up I see the WiiKey's LED's go red for a second, then quickly through a Blue, Red, Blue, off sequence. The Wii comes up and asks me to press A to identify the controller, I press A and hear the bong. It moves to the language selection screen and English is pre-selected. From this point I cannot move to another language or to confirm to continue.
The drive does accept disc's and I hear them spin up with no problem.
Since the original install, I have taken everything back apart to verify proper voltages and re-check wire landings. All are correct.
I would appreciate any help you can give.
(BTW, this is a Yellow Sticker WiiKey 2)
Last edited by nightshade; 12-01-2008 at 04:43 PM.
Reason: More Info
Alright, I will open myself up to the torture.
Apparently these things called Wii's have a Sensor Bar that needs to be plugged in. Its amazing how much better the remotes work with it.
Alright, let the noob have it.......
Admin / Super Mod
roflol...we all do different things like that
Wiihacks Super Mod / Admin