the cios player ce might use is cios202
are you using ios249 to install the wads?
Ok, here's the scoop: I got a softmodded 4.2 and using CIOS249. I had everything going great - USBLoader GX w/ forwarder, Netflix w/ forwarder and then I got greedy and wanted MPlayer CE and got an issue. I tried doing the usual with downloading Mplayer to apps and all that stuff but it did not work. So, I read somewhere that I had to run the Hermes CIOS222 v4 to get Mplayer CE. After doing this I could not get the Netflix forwarder to work. Netflix still worked thru USBLoader GX though. I also found out that I could not add any more Wads. I am running Wad Manager 1.5 as I could not get 1.7 to be recognized for some reason. Every Wad I try to install gets error -1029. I think I read somewhere that this is Turcha Bug related, but I wanted a 2nd opinion. I apologize ahead of time if this issue was tackled earlier in this forum, but I could not find anything on this whole scenario. If it is Trucha, could someone give the steps as it has been a long time and I doubt I would remember the process?
seems you have rev19+ installed in slot 249(base other then 38) if so
you need wad manager 1.7 make sure its SD:/apps/wad manager/boot.dol
do a syscheck post the report here
Wad Install Error: Most likely have outdated cIOS still installed. Memory might be full. Wad may be corrupt (patched/injected incorrectly)
also if you insatll ios58 then the new hbc 1.0.8 you wont need ios202 for mplayer ce it will use ios58 for usb2 support.... mplayer ce r619
Mplayer CE still requires IOS202 to operate, removing IOS202 will have Mplayer CE load to a black screen. IOS58 is supported by Mplayer CE, but not required.
Last edited by Stomp_442; 11-15-2010 at 07:08 PM.
best way to stay updated Project Hosting on Google Code Source->Changes
Last edited by Cile; 11-15-2010 at 07:01 PM.
yeah, I figured out how to see the changes on projects, but thanks
guess I'll have to check and see if there's anything else I didn't know about
IOS202 installed and IOS58 removed > MplayerCE works
IOS202 removed and IOS58 installed > MplayerCE don't work.
Both IOS202 and IOS58 installed > MplayerCE works.
I also have DVD support thru IOS202 and/or DVDx
I will correct my post to read IOS202 or HBC 1.0.8 required.
Last edited by Stomp_442; 11-15-2010 at 07:47 PM. Reason: merge posts
Thanks all for your help. I am at work most of the day today. I will post my syscheck when I get home. But, just to be sure I am understanding things correctly: if I update my CIOS 249 to rev19 (which I did last night), & use wad Manager 1.7, then install ios58, I should be golden to use MPlayer CE or WiiMC? Will I have to do anything else to fix the 222/202 I installed? BTW, which player is better? What is the advatage of each?