For dont Hijack others threads i will repost mine here....
I was with an old Wii with wiiclip ( hardware mod) but some days ago , first of last update, i decided to install Homebrew.
After install i did a backup copy of Nand.bin and key.bin .... this for a failure system rescue.
But i did the main Error.... i dont deactivated the Autoupdate...
So after fews days... my wii result FULL BRICKED... black screen.
I tryed to restore NAND but without results. I tryed with diffrents SD cards and with diffrents kinds of format style. Fat-Fat32...
Nothing to do... it seems Death.
Now when i turn on my wii with SD card and bootmii, DVD bink only 1 TIME not 2.... and a friend sayd to me i need a full restore of my system with a Nand Programmer.
THere is a Guide for do it alone?I saw there are many but if Yes which one is for me?
If not... There is someone who can Repair my wii??? i will pay for this Work, you can contact me in Private message... or answer here ...
I wish you desear best regards.
If i have a SAVEMII chip (savemii.net) can it help me to resolve this problem? If yes How?.... Is not so much clear How to work on it!....
Update... When i plug Savemii Chip My dvd blink 3 times... but screen still appear black without signal.
I><><><><><><><>II Nintendo Wii II 4.0U II Korean Region Changed II cIOS 249 v20 with base 56 II<><><><><><><I
I><><><><><><><><>II 8GB SDHC Card II WBFS II 2GB SD Card II FAT32 II Logitech K120 II<><><><><><><><><I
I><><><><><>II Homebrew Channel 0.5 II Priiloader 0.4 II Bootmii as IOS II USB Loader GX R928 II Neogamma R8Final II<I
I><><><><>II Windows XP Professional SP3 32bit II Intel Core Duo E7500 2.93GHz II Nvidia Geforce 9800GT II 1GB RAM II<I
Uhm... how is he going to update when he still gets a blank screen with savemii?
He is clearly bricked and needs the nand reprogramming
I think i know the problem on how to fix it
1.backup copy of nand and keys(from bootmii when u install it)
2.gamecube controler(needs to be modafied)
3.wii bootmii recovery disk
4.certain types of wads
1.plug in your gamecube controler into port 4
2. power on your wii while pressing the 4 directional buttons
and a recovery menu should apear up with
| ___________________________(usa)4.1E _
3.insert wiirecovery disk and a menu will appear asking you to erase your wii
4.go back to sys menu and u should be back to normal
(you can restore your stuff but then ur wii will go back to the brick)
if u hav bootmii or pre/priiloader load bootmii and rewrite the nand using the nand.bin
how go to the gears on the right and press the one that has the one with the red arrow
not the 1 with green
Gamecube pad wont work.... that is the free way of making a savemii... Which he has already bought and doesnt work.
He doesnt have bootmii as the drive light blinks once and he doesnt have priiloader.
He has been told his options.
Alk1, sending the mobo for NAND Flash re-programming is unlikely inevitable. unless you got an Elnec.
depending on your location/country,
Bad_Ad84, erikie, streamlinehd, ..... could be your service. FYI
(forgive me, if i miss other names being helpful. )
Last edited by billyhome; 10-19-2010 at 03:32 AM.
As the 4.3 system update has disabled your previous bootmii installation, you will need to either purchase and follow an Infectus tutorial or send your Wii off for NAND Flash reprogramming. If you want to read about Infectus you will find two tutorials in the Bricked Wii Forum HERE, one by erikie HERE and the other by DeadlyFoez HERE.
I am aware that English is not your native language so you may just find it easier and I hope not too expensiver to send your Wii off to one of our European members that provide this service. erikie in in the Netherlands and BadAd84 is in England. Of the two, Bad_Ad84 has posted in your thread and is aware of your need. You can send a PM of inquiry about rates and shipping details, etc to these individuals. The other two members that provide this service, DeadlyFoez and streamlineHD, are both in the US.