I have a wii 4.1 and I am attempting run USB loader gx. I have a wd passport essential se 1T. It is partitioned in half. *One side fat32 and hold all homebrew along with movies for wiimc. The other side is formatted wbfs and hold all my isos.*
I have used cios and Hermes cios. All guides have been followed.*
** *USB loader will not update. (yes I checked to make sure internet was attached - I don't use wifi)
** *USB loader just lights up the wii when I go to install a new game.*
** *USB loader just freezes if it sits.*
Any help would be appreciated. I have looked through the other threads with out success.*
I am running the boot.dol. From the hdd.
I have not loaded the forwarder on this wii. I want it running correctly first.
Follow Cile's link to download the latest revision Usb loader gx. Rename the file to boot.dol and but in the usbloader gx folder in you apps directory and see if that works.
SystemMenu 4.1U ~ Bootmii/boot2 ~ Priiloader0.4 ~ Darkcorp v1.0 ~ CIOS Rev17 ~ Hermes v4 222/223 ~ Hermes v5 202 ~ NeoGamma R8 v17 ~ CFG Usbloader ~ Wiiflow
hi i have a problem with usb loader gx.. when im in menu,after 2-3 minutes the screen freeze when i select games,and most turn power off the Wii.
when i use ocarina black screen,ocarina off..game works? someone help me?..
Have you tried the rev Cile has posted above? Some revisions of GX do not function very well. The one listed above is proven stable.
Yes I just downloaded r938.dol and changed to boot. Same thing. After a few seconds everything stops working.
Did you replace your existing .dol file with the one you downloaded?
You can download any of the newer revisions here. If your existing one will not function properly, try deleting anything GX and reinstalling, extract it to your fat 32 partition HDD.
If you use 938, the wad file above will provide you with a system channel to boot from, eliminating the need for the forwarder.
Here is the official GX site if you need to redownlod the app.
I did download from the USB official site. I deleted everything I had and reinstalled. Still the same. I am going to try again but have a thought before I do. Could this have anything to do with the hdd? If my fat32 was not set as primary would that cause this problem. The reason I think this is one I can't remember if I set it to primary ( I will check that shortly). Second it is almost as if the hdd just shuts down after it loads and all that is left running is what the wii has in it's short term memory. Any thoughts?
Here is the latest.
First I deleted and reformatted my wfbs partition. (I did this to start completely fresh)
Second I once again deleted all USB loader gx files off the hdd.
Next I used the USB loader gx 1.0 installer found on the official site.
( I used this to make sure all files needed were loaded in the correct spots)
Forth I put the hdd back on the wii. Ran hbc and usbloader gx. It worked, and then...
I put a game into the wii and it recognized it. I hit install and then just a blank usb loader screen That was five minutes ago