You can uninstall it (no point though. just install rev 17). Never uninstall ios under 200.
To make loaders work, you'll need newer cios. Get cios rev 17. link: cIOS38_Rev17-Installer.rar
I accidentally installed cIOS36-rev7.wad through the Wad Manager and now NeoGamma wont work. My question is this.....is it safe to uninstall the same file through the Wad Manager or do I need to do something else to fix the issue. I am running a 4.2u f/u. Thanks for the help!
Ipsa scientia potestas est.
Warning: Piracy is NOT supported. Word your questions carefully.
The only reason I asked what my question is, I googled cIOS36_Rev7 and found several very old download links for it. I just want to make sure that everyone is on the same page.
edit: maybe in the old days it was cIOS36 installed as IOS249 instead of cIOS38?
correct...maybe in the old days it was cIOS36 installed as IOS249 instead of cIOS38?
There is no cIOS38 rev7. If the OP was trying to use the cIOS36 rev7 installer, the required IOS36-64-v1042.wad should have been placed on the root of the SD card. It seems that the OP placed the IOS36-64-v1042.wad in the wad folder and installed it with the wad manager. Doing this, the OP has overwritten his IOS36, which was probably patched and now is not. Deleting IOS36 is not recommended. Now the OP is going to have to truchra sign his IOS36 again. Any of the USB Loaders require cIOS rev9 or higher to work. Viewing post #4 should fix the problem.
Last edited by Stomp_442; 06-04-2010 at 08:10 AM. Reason: spelling
Thanks for the replys. I want to clear up a few things to make sure I fix the issue insead of making it worse.
1. I had cIOS36-rev7.wad in my wad folder and used wad manager to install it. I did not install IOS36-64-v1042.wad as Stomp442 has suggested.
2. I followed this guide to mod my wii so Im not sure that I had a patched ios36 to begin with.
3. My USB loader still works. The only issue is that NeoGamma goes to a black screen and never loads.
Is the suggestion in post #4 still a good solution?
No you ios36 is not fakesigned if you followed messies guide. Id install a fresh ios 36 and then fakesign it again using dop mii
Poss do a sys check
D/L sys check from my signature below.
unzip and put contained folder in apps folder on sd card
Open up HB
Run syscheck 1.6
Exit when finished.
Take sd card back to computer
On the root of sd card there will be a csv file
Open this with word pad and copy and paste the results in a pm to me.
To fakesign ios 36 from Shadows guide after installing new ios36
Get DOPMII HEREStep 3 - Restoring The Bug Into IOS36
Pre-Note: If you have no working Wi-Fi Connection, you can try selecting 'Load iOS from SD Card' instead of 'Download from NUS'
a) Load and Homebrew Channel and run DOP-Mii, on the IOS Selection Screen, select 'Install An iOS w/ fakesign' by pressing down on the d-pad then A on the wiimote. You should now be in the trucha bug restorer portion of DOP-Mii. Load IOS36 and select Downgrade IOS15. Each time it asks, select 'Download from NUS'
Make sure you get no errors. If Loading IOS36 doesn't work for this step, press B for no IOS reload when asked to load IOS. Although It should do these steps almost automatically, I'll just include the info.
b) In the fakesign installation, once iOS15 is downgraded, it should begin patching iOS36.. Make sure to install the patched IOS36 with all these patches selected (Just Say Yes to All of the ones that come up)
Install IOS to slot (36)
Hash Check (trucha) Yes
NAND Permissions Yes
Then Press A on Install Patched IOS36. Again, everytime it asks, choose 'Download from NUS'
c) On the same fakesign installation. Load IOS36 and select Restore IOS15. Each time it asks, select 'Download from NUS'
Once done, return to homebrew channel