Page 1 of 22 12311 ... LastLast
Results 1 to 10 of 216

Thread: How To Get POP The Forgotten Sands Working

  1. #1
    Senior Member Cile's Avatar
    Join Date
    Nov 2009
    Location
    Australia
    Posts
    5,071

    How To Get POP The Forgotten Sands Working

    You need these revisions of the loaders or up to get this game to work:

    WORKS WITH cIOS38rev17/19/20

    CFG Loader v58



    CFG_USB_Loader_58 Full Package


    USB Loader GX R938

    r938 Channel


    r938.dol


    Neogamma R8-9

    Download and use the .wip that matches your game region and put it in neogamma folder
    (if you dont have one make one on the root of your sd)

    RPWZ=NTSC
    SPXP=PAL

    PoPwipTest1.zip

    Enable looking for patches, disable EVERYTHING that patches the disc in another way(Ocarina, language, video mode patches, Country String patching etc) and when loading check that it says patch applied.


    Working With Wiiflow r92

    You will still need to add disable_dvd_patch=yes and returnto=0 in the wiiflow.ini, under the [GAMEID] section.And change [GAMEID] to the GAMEID of your Prince of Persia version.

    ios249.dol

    ios250.dol

    ios222.dol

    ios223.dol

    ios224.dol

    NTSC-J Users With No Voice in the game try this....

    Get the latest NeoGamma:
    http://www.wiihacks.com/software-bac...-channels.html
    or the GX linked above

    Use clean settings(no patches at all, no Ocarina)
    Put the included .wip(linked above) files to the codes folder on your sd card
    Enable looking for patches
    When booting the game, look what it says about patches

    If you can't get the game to work with this, you have some bigger problem. If this works, enable Ocarina, put the gct file (RPWZ41.gct or RPWZ41(2).gct) may need to change the disc id to match the one of your game) in your codes folder on sd card, enable language forcing, and check if it says "codes applied".

    Credit:
    Wiipower(Neogamma)
    Oggzee,Dr clipper(CFG)
    GX team(dimok)
    Last edited by Cile; 08-31-2010 at 04:44 PM. Reason: GX no longer need work lol

  2. #2
    EDIT 2 : You don't have to patch the dol anymore Using the New CFG Usb Loader With PoP Patch.

    How to Install Configurable USB Loader -- GUIDE --

    For People Already Using CFG
    cfg57b4.dol
    cfg57b4-222.dol



    Last edited by Krank; 07-21-2010 at 04:20 PM.
    Damn I suck!!!!

  3. #3
    Senior Member
    Retired WiiHacks Staff
    narse1979's Avatar
    Join Date
    Mar 2010
    Location
    Southern Fairy Land
    Posts
    7,489
    Working with Wii Flow 222, changed ios to 249 to run
    Last edited by narse1979; 05-19-2010 at 11:07 PM.


  4. #4
    Quote Originally Posted by Krank View Post
    You need to patch with a hex editor. Testing now. ( Said to work with Rev 17 As well)
    sorry for the stuiped question but replace it where, there are two partitions in Wiiscrubber partition 0 and prtition 1
    or should I replace both
    Last edited by nightstah; 05-19-2010 at 02:47 PM.

  5. #5
    Senior Member
    WiiHacks Staff
    Forum Administrator
    Dr. House @ Wiihacks
    Only Site Donators Can PM Staff
    nightstah's Avatar
    Join Date
    Nov 2009
    Location
    Repatriated to WH
    Posts
    19,011
    Quote Originally Posted by rou2a View Post
    sorry for the stuiped question but replace it where, there are two partitions in Wiiscrubber partition 0 and prtition 1
    or should I replace both
    Oh boy, here come the one-post-wonder users that came out of the woodwork on the MH3 thread. Look here for a primer/tutorial on Wiiscrubber.

  6. #6
    Quote Originally Posted by nightstah View Post
    Oh boy, here come the one-post-wonder users that came out of the woodwork on the MH3 thread. Look here for a primer/tutorial on Wiiscrubber.
    lol here goes the 2nd post, well actually I read the tutorial before asking, but it didn't mentioned in which partition so, I replaced both and finally the game started working.

    thank you all for the wonderfull informations, and help

  7. #7
    Senior Member
    WiiHacks Staff
    Forum Administrator
    Dr. House @ Wiihacks
    Only Site Donators Can PM Staff
    nightstah's Avatar
    Join Date
    Nov 2009
    Location
    Repatriated to WH
    Posts
    19,011
    Quote Originally Posted by rou2a View Post
    lol here goes the 2nd post, well actually I read the tutorial before asking, but it didn't mentioned in which partition so, I replaced both and finally the game started working.
    Um, let me put it this way: if you knew what you were doing and looked at the linked tutorial, you'd know. What does Priiloader block? The update partition. What does USB Loader GX strip when it "installs" a game onto the HD? The update partition. Which partitition is always the game data and always the update partition? This is illustrated quite adequately on the previously linked tutorial. Glad you at least did post back

  8. #8
    New Member
    Join Date
    Jun 2009
    Location
    Michigan
    Posts
    152
    Can someone tell me how to patch this new .Dol file with a hex editor. I never could use a HEX program always screwed up because I have no idea how to use these programs. A little help would be Very much appreciated. Thanks!

  9. #9
    All you have to do is open the dol in a hex editor and manually change the values by placing the cursor where you want it and typing the new values. They will type over the old values.

    If you need a hex editor use HxD
    Damn I suck!!!!

  10. #10
    Senior Member
    Join Date
    Mar 2009
    Location
    USA
    Posts
    5,552
    I think that USB Loader CFG will have the patch for this in day or so, kind of like the NSMB patch that was built into the loader.

Page 1 of 22 12311 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •