Results 1 to 2 of 2

Thread: problem with softmode

  1. #1

    Question problem with softmode

    Happy New Year everyone!!!!
    I installed breware softmode I inadvertently updated homebrew and it wont work. When I go to homebrew and run bootmii it brings up 4 icons on the screen but I can't choose any because it appears to lockup. All I can do is reset the wii. How to I boot from sdram so I can remove the updated homebrew? By the way I just purchased the wii Dec 30/09
    Many Thanks

  2. #2
    Join Date
    Sep 2009
    Thats BootMii starting up, which is a good thing. Means you have the ultimate brick protection. You can either use a gamecube controller or the Wii Console buttons [power to cycle and reset to choose] to navigate the menu. I would recommend making a NAND backup with that program so you can restore your Wii if it ever bricks. If you do not want to see the bootmii screen anymore, just go into your SD card and delete the bootmii folder that is on the root.

    Since this is your first post,

    Welcome to WiiHacks,

    Take the time to read the RULES! of the site, you don't wanna be sent to the Reading Room, or worse, Banned because you broke a rule of the site.


    Got a mod-chip? Thinking about a mod-chip? Then go HERE! for many of the answers you're looking for. Just know that you can just as effectively mod a system without a mod-chip.

    Please take a look at this link for any answers to most of your questions/problems New Member Introductions [thanks ShadowSonic]

    Got a Bricked or Semi Bricked Wii? Then look no farther than THIS! thread for the possible solution.

    BUT!!! Before asking a question please visit THIS!and THIS! thread..... [thanks FAVS & trekster]

    If your on the 3.1 - 4.1 System Menu then you may want to start HERE! [thanks Dogeggs]

    If your on the 4.2 System Menu, then THIS! is where you want to be. [Please note, DO NOT update to 4.2 if you arn't already] [thanks messie]

    Getting an error while trying to do something? The Answer is HERE! [thanks messie]

    Wanna know what all this cIOS/IOS talk is all about....Then check THIS! thread out. [thanks Cressida]

    Also take note that Nintendo has been putting some new drivechips in their systems that will disable playback of ANY burnt discs. To see if your Wii is one that has this new D3-2 chip refer toTHIS!page and cross reference your serial number. Please note that USB Loading is still functional even if you have this chip.

    Want to find out a bit about USB loading, try THIS!link out [thanks gen3sf]

    Any other questions/answers that were not covered, then please ask them HERE! [thanks ModderMan for the awesome site]

    Please read, reAD, READ till your eyes bleed. Go over everything until your sure you can attempt these mods. You don't want a bricked Wii because of a step you might have missed.

    Have Fun! and Good Luck!!!!



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts