Page 1 of 202 1231151101 ... LastLast
Results 1 to 10 of 2020

Thread: Guide: How to fix Korean 4.2 error: 003 unauthorized device has been detected

  1. #1
    Senior Member
    DA KINE WiiHacker
    mauifrog's Avatar
    Join Date
    May 2009
    Posts
    9,198

    Guide: How to fix Korean 4.2 error: 003 unauthorized device has been detected

    THANK YOU GIANTPUNE
    Smash stack pal/kor has been release-
    SmashStack PAL/KOR

    What does this mean for your 003 wii? It can be fixed.
    What you will need, 1:1 iso of SSBB-PAL
    A game that installs a channel or A game that reboots to the safety screen
    What you will do, load SSBB-PAL on your 4.2/4.3u/e/j 003 bricked wii
    How will you load SSBB-PAL on your U/J wii? You will use Giantpunes mariokart pawns method.
    A gamecube controller
    A dvd drive capable of reading burned disc, or a wode (new wii dvd drives will not work, you may need to replace it.)
    A modchip or a wode

    Error 003 is caused by system menu 4.2/4.3+ and ios70/80 on region changed Korean wiis

    The FIX- You need to install ios60-v6174 into ios slot 70, 80, 90. Then Never ever update from Nintendo again. Be sure to install priiloader to block updates. If you follow my softmod guide, your wii will be fixed when your done. Alternatively, you can use modmii to install the need patched ios.

    Download-
    Smash-Stack.zip
    Extract to a formated standard SD card 1-2g
    SDHC will not work


    4.2/4.3u 003 wiis- Download
    error 003-USA.zip
    -Extract to your pc in folder \003
    -Do MarioKart-PWNS or SwapDisc-PWNS

    4.2/4.3j 003 wiis- Download error 003-JAPAN.zip
    -Extract to your pc in folder \003
    -Do MarioKart-PWNS or SwapDisc-PWNS
    -Currently 003 J wiis can not be fixed with SSBB. SSBB-PAL/KOR will not load under the JAP language setting. At this moment only 003 Jap wiis can be fixed using the cioscorp method, which only works on Jap wiis with cioscorp installed.

    4.2/4.3e 003 wiis- Patch your SSBB-PAL.iso to autoboot with bootme
    -Autoboot SSBB-PAL and run the smash stack.
    -Hackmii loads, install HBC, bootmii, make a nand backup
    -follow my Guide: Softmod Any Wii to fix

    Mario Kart PWNS

    This will allow you to load Smash Stack PAL on a non pal wii
    You can do this via channel install
    What you need-
    A game in the region of your wii
    The game must install a channel, that is not currently installed on your wii
    Games that install channels- Mario Kart, Wii Fit, Rabbids Go Home

    Mario Kart- tested and working
    Wii Fit- not working for me
    Rabbids Go Home- not working for me

    Copy your Super Smash Bros. Brawl PAL ISO to folder /003
    Copy your channel installing game to folder /003
    Navigate to folder /003
    Rename your Super Smash Bros. Brawl PAL ISO -> ssbb-pal.iso
    Rename your channel installing game -> channel.iso

    Run MarioKart-PWNS.bat
    Let wit do its thing
    Code:
    wit mix channel.iso channel.iso ignore "@ignore.txt" select DATA as chan --dest disc1.iso --overlay 
    wit edit disc1.iso --id=0SBE01 --name "MarioKart-PWNS" --region USA --modify=DISC
    wit mix disc1.iso header region ignore "@ignore.txt" ssbb-pal.iso select DATA as chan --dest disc2.iso --overlay
    Burn on good Media. Dual Layer media for ssbb-pal.iso, such as verbatim dvd + or minus. I have had good luck with verbatim dl dvd +r 8x and verbatim dl dvd -r 2.4x.
    Burn with ImgBurn, @ 4x set the layer break to - 2084960
    Burn disc1.iso on a good dvd5 disc
    Burn disc2.iso.iso on a good dvd9 dual layer disc
    Use a gc controller to enter recovery menu via savemiifrii
    Insert the channel disc, the game boots

    Use your wiimote and navigate to the channel installer. Select to install the channel, it will tell you this channel uses so many block. When you get to the install confirmation, press [HOME] on the wiimote, eject disc1, insert disc2, press [HOME] on the wiimote, install the channel-
    Super Smash Bros Brawl- VC demo menu will load, press [HOME] again, restart-
    SSBB strap screen loads. Make a savegame.

    Go to the stage builder, delete any custom stages you may have go back to the main title screen
    Insert a standard sd card, 1-2g, non sdhc with Smash Stack PAL on it
    Go back to the stage builder- Hackmii Installer Loads
    Install HBC, Bootmii, make a nand backup
    Follow my softmod guide to fix
    Guide: Softmod Any Wii
    Your wii is alive

    Disc Swap PWNS
    What you need-
    A game in your wii's region that will autoboot- Tested with Castlevania
    The game must reset to the strap screen when it is reset via [HOME] on the wiimote [Reset] on the wii screen
    Game that reset to the strap screen- many games maybe, you can test, Castlevania works
    Game must be kind and load another game for you- Tested with Castlevania, I am sure there are others
    Super Smash Bros. Brawl-PAL, 1:1 DVD9 iso

    Most games will require you to load to the title screen, press [HOME] on the wiimote, swap discs, press [HOME] and the wiimote and go back to the title screen. Now listen to the wii drive, as soon as the drive clicks to spin up the disc, press [HOME], then click restart on the wii screen. The timing will be different for every game. Some games you can just restart, others need the spin up first.

    Games that work-
    Castlevania Judgment -with spin up
    Dora- Crystal Kingdom -with spin up
    BOOM Blocks Bash Party -with spin up
    Carnival Games - no spin up
    Family Party- 30 great games- with spin up.
    Sonic Black Knight

    Copy your Super Smash Bros. Brawl PAL ISO to /003
    Copy your Swap Disc game to /003
    Navigate to folder /003
    Rename your Super Smash Bros. Brawl PAL ISO -> ssbb-pal.iso
    Rename your swap disc game -> swap.iso

    Run SwapDisc-PWNS.bat
    Let wit do its thing
    Code:
    wit edit swap.iso --id=0SBE01 --name "SwapDisc-PWNS" --region USA --modify=DISC
    wit edit ssbb-pal.iso --id=0SBE01 --name "SwapDisc-PWNS" --region USA --modify=DISC
    Burn on good Media. Dual Layer media for ssbb-pal.iso, such as verbatim dvd + or minus. I have had good luck with verbatim dl dvd +r 8x and verbatim dl dvd -r 2.4x.
    Burn with ImgBurn, @ 4x set the layer break to - 2084960
    Burn swap.iso on a good dvd5 disc
    Burn ssbb-pal.iso.iso on a good dvd9 dual layer disc

    Use a gamecube controller and load the recovery menu using savemiifrii.
    Insert your swap disc, let the game load to the title screen
    Press [Home] on the wiimote, eject the swap disc
    Insert SSBB-PAL
    Now depending on the game, you could press restart or your may need to press [HOME] and load the game title screen again, then very very quickly press [HOME] again, then restart on the wii screen. It will be different for every game
    For Castlevania- Load the title screen, Press [HOME], swap discs, press [HOME], wait 0.5-1sec, press [HOME], reset from the wii screen. Timing has to be right.

    This should load the VC demo screen of SSBB, press [HOME] and restart again.
    SSBB strap screen should load. Make a savegame.
    Go to the stage builder, delete any custom stages you may have go back to the main title screen
    Insert a standard sd card, 1-2g, non sdhc with Smash Stack PAL on it
    Go back to the stage builder- Hackmii Installer Loads
    Install HBC, Bootmii, and make a nand backup
    Follow my softmod guide to fix.
    Guide: Softmod Any Wii
    Your wii is alive



    [SPOILER="Patched ios36 cioscorp method"]



    What does not work:
    Smash Stack via SSBB = FAIL
    All recovery disks = FAIL
    [SDDm NAND fill = FAIL
    Wii Fit time change = FAIL
    4.2k system update via disk = FAIL
    Region Free game = FAIL
    Netflix game = FAIL

    Update: 4.3 003 error wiis must install cIOS80-v6174.zip. If you updated from 4.2 to 4.3 and received this 003 error, thiis guide should work for you.

    Method #1 Mario Kart Channel Install

    This guide will fix the 003 error, only if ios36 is patched with the trucha bug.
    This would typically require cIOSCORP 3.x to be installed prior to system update
    If you where loading backups from the disk channel, you may have cIOSCORP
    Give it a try, best of luck.

    This will install cIOS70-v6174-v3.6.wad
    From cIOSCORP 3.6, which will fix your 003 error

    13 confirmed recoveries

    Requirements-
    Patched ios36, from cIOSCORP 3.x or other method
    Possibly ios250 (probably not required)
    Mario Kart iso- unscrubbed, in region
    A modchip
    Must Not Have Installed Mario Kart Channel
    A gc-controller
    KOR_003-FIX.zip
    Wii Bootmii

    Extract KOR_003-FIX.zip to the location of your Mario

    -Run MakeKeyBin.exe, type 42, click generate

    -Run WIIScrubber.exe
    Click load ISO, select Mario Kart iso
    Double click Partition 2- INSTALLER
    Right click RevoKartNR.wad
    Click replace
    Select cIOS70-v6174-v3.6.wad
    Close wiiscrubber

    - drag Mario-Kart.iso onto IOSPatcher.exe, type 36 and hit enter, ios250 should also work. If 36 fails, try 250

    -Use wii Bootme and set the iso to autoboot

    -Burn the Mario-Kart.iso
    Use good media, like verbatim dvd -r. Burn it slowly, with imgburn

    -With a gc-controller in port 4, boot the wii with disk removed, do savemiifrii to the recovery menu. Hold all 4 directions down on the d-pad, while holding power the wii and keep holding the d-pad down. You should see a black screen with 4.2u/e/j. From here you can autoboot many in region games.
    -Insert the Mario-Kart disk, let it boot- be patient.
    -If it fails to boot, use Wii Bootme to patch the iso to auto, then try again.

    -Once the game boots, click on settings, mario kart channel- Install
    -If you get error 003, you don#t have a trucha ios36 and this will not work for you.
    -Be sure you patched the iso to 36, or 250.

    If you already have the Mario Kart Channel installed, this will not work. You can try to duplicate the process with other games that install channels- such as wii fit (ios33), wii fit plus (ios53), Rabids Go Home (ios33), perhaps wii speak. The game must run on an ios that is patched.

    If you do fix your wii, be very happy someone installed cIOSCORP on it.

    This technique could also be utilized to fix other banner type bricks when other options fail.

    Method #2 Game ISO mod and swap

    Example Method- Castlevania Judgment -using cios36
    Requirements-
    Functional RM via savmii/savmiifrii (gc-controller)
    Ios36 must have the fakesign bug, aka trucha bug- probably from cIOSCORP
    You will need a modchip, preconfigured to autoboot, region free enabled
    Castlevania Judgment, unscrubbed iso- in your region
    (tested with ntsc-u version)

    Download:
    iso-tools.zip
    WM_1.4.dol.zip
    Extract to the location of Castlevania Judgment iso.

    -Use wii Bootme, set the iso to autoboot
    -Burn Castlevania Judgment iso, burn it good and proper

    -Run MakeKeyBin.exe, type 42, click generate

    -Run WIIScrubber.exe
    Click load ISO, select Castlevania Judgment iso
    Double click Partition 1- data
    Right click on main.dol,
    Click replace
    Select WM_1.4.dol
    main.dol name will not change
    Exit

    -Use wii Bootme, set the patched iso to autoboot

    -Burn the patched Castlevania Judgment iso, burn it good and proper

    -Boot the wii and load the Recovery Menu via savemii/savemiifrii.
    You should see a black screen with your system menu version #

    -Insert your Castlevania Judgment disk, it should boot
    Let the game load to the intro movie, eject the disk
    you will see "error please insert Castlevania Judgment disk"

    -Insert you patched Castlevania Judgment disk
    The intro movie plays again, goto the main game menu
    Push "Home" on the wiimote and click "restart"

    -Wadmanager 1.4 will load,
    push A to install/uninstall wads, or
    push B to exit to HBC

    -Now fix your wii, You can use ios36 in wadmanager
    Install cIOS70-v6174-v3.6.wad.zip

    On 003 Kor wii- this strongly suggests the presence of cIOSCORP, it is likely that all game ios are patched, and many games will work with this method. For the game to work, it must restart to the health screen not the main game menu. Post your results.

    Method #3 Indiana PWNS

    Users who installed Indiana Pwns prior to the 003 brick can recover by autobooting Lego Indiana Jones and loading wadmanager using ios250, then install cIOS70-v6174-v3.6.wad.
    Note: This is also true for users who install Yo-Gi-Vah or Yo-Gi-OWNED

    Method #4 Nand Reprogramming
    Users who have their nand keys or made a bootmii backup prior to their brick can use that nand backup to have their nand reprogrammed. If you do not have your nand keys or a boobtmii nand backup, you can not reprogram your nand. If you have this, you can reprogram the nand yourself but the precess is complex. Bad-Ad84, Deadlyfoez, and streamlinehd can do the job for you, for less than you should do it yourself.
    [/SPOILER]
    Attached Images Attached Images
    Last edited by cjizzle; 02-11-2012 at 07:09 AM. Reason: Fixed some links.
    Ipsa scientia potestas est.


    Warning: Piracy is NOT supported. Word your questions carefully.

  2. #2
    Retired WiiHacks Staff Tealc's Avatar
    Join Date
    May 2009
    Location
    Sunny Wales, UK
    Posts
    7,152
    Where do you get your brick knowledge from?

    Seems plausible. Where did you get the idea from? I notice that gbatemp have one that requires filling up the NAND.
    Not really doing much Wii stuff these days.

  3. #3
    Senior Member
    DA KINE WiiHacker
    mauifrog's Avatar
    Join Date
    May 2009
    Posts
    9,198
    Quote Originally Posted by Tealc View Post
    Where do you get your brick knowledge from?

    Seems plausible. Where did you get the idea from? I notice that gbatemp have one that requires filling up the NAND.
    Well I read this and that, do my best to understand it. Occasionally I have ideas, probably not unique but I try to share them. This is a hypothetical solution, but it makes sense and should be fixable. I imagine there will be issues making some of these apps run, but there should be a solution.

    The biggest question, is what is the best solution in step-5. The is the money step, if it works the wii should be fixed, if not the problem may persist or the wii may brick for good.
    Ipsa scientia potestas est.


    Warning: Piracy is NOT supported. Word your questions carefully.

  4. #4
    Retired WiiHacks Staff Tealc's Avatar
    Join Date
    May 2009
    Location
    Sunny Wales, UK
    Posts
    7,152
    Is that cIOS70 a cIOSCORP file?
    Not really doing much Wii stuff these days.

  5. #5
    Senior Member
    DA KINE WiiHacker
    mauifrog's Avatar
    Join Date
    May 2009
    Posts
    9,198
    Quote Originally Posted by Tealc View Post
    Is that cIOS70 a cIOSCORP file?
    It is, the cIOSCORP cios70, is a patched cios60, so it does not preform the check preformed by ios70 that causes the 003 error.

    Wiibrew has a good explanation of the issue.
    Error 003 - WiiBrew
    Ipsa scientia potestas est.


    Warning: Piracy is NOT supported. Word your questions carefully.

  6. #6
    Senior Member
    DA KINE WiiHacker
    mauifrog's Avatar
    Join Date
    May 2009
    Posts
    9,198
    Also wiibrew has a cryptic discussion regarding the use of cios70 here.
    Lots of smart people over there at wiibrew, wish they would remove the censorship and allow free thinking.

    It should be possible to patch ios60 to install to ios70 without using cios70, but I don't know how to do that and have not found one yet.

    Not that is matters, as of yet, know one with this issue has reported being able to load an app. But it should be possible, might require a modchip.
    Ipsa scientia potestas est.


    Warning: Piracy is NOT supported. Word your questions carefully.

  7. #7
    Retired WiiHacks Staff Tealc's Avatar
    Join Date
    May 2009
    Location
    Sunny Wales, UK
    Posts
    7,152
    Well I guess IOS70 is IOS60 really with all the anti-homebrew rubbish added in so there's no reason why IOS60 couldn't function as a System Menu. Might be tricky when updating to 4.3+ comes about.

    Well there be a genuine use for a cIOSCORP file, we'll have to wait and see.
    Not really doing much Wii stuff these days.

  8. #8
    Quote Originally Posted by mauifrog View Post
    Also wiibrew has a cryptic discussion regarding the use of cios70 here.
    Lots of smart people over there at wiibrew, wish they would remove the censorship and allow free thinking.

    It should be possible to patch ios60 to install to ios70 without using cios70, but I don't know how to do that and have not found one yet.

    Not that is matters, as of yet, know one with this issue has reported being able to load an app. But it should be possible, might require a modchip.

    i think you need a patched IOS70-v65534
    i have a korean wii that was virgin on 4.2K - successfully installed homebrew with the help of xyxero.
    - guide can be found here > http://sites.google.com/site/complet...uide/korea-4_2
    currently it has been region changed to 4.1E to do so i needed a patched IOS70-65535
    which was not made by me so I'm not sure if i can go passing it arround.

    next time I'm intouch with the person I'll ask if it's ok for me to post it here
    as i dont want to get an arse kicking for doing something i shouldn't

  9. #9
    i have a korean wii with the dreaded error 003. i have drivekey set to autoboot and a retail copy of the ssb ntsc. what files would i need to fix this ? i was thinking if the ssb will boot up i maybe i can use smash stack to load homebrew ? after that what do i have to do ? maybe we can use that patch IOS70-65535 to fix this error ?

    @PEYOTE so if you have an patched IOS70-65535 then you unit will be safe to update ? since i understand that this error 003 is caused by an unpatched ISO70?

    if this patched ios can help, maybe you can ask the author of the patched ISO70 to help us out ?
    Last edited by rolla03; 12-05-2009 at 07:07 AM.

  10. #10
    Senior Member
    DA KINE WiiHacker
    mauifrog's Avatar
    Join Date
    May 2009
    Posts
    9,198
    Quote Originally Posted by rolla03 View Post
    i have a korean wii with the dreaded error 003. i have drivekey set to autoboot and a retail copy of the ssb ntsc. what files would i need to fix this ? i was thinking if the ssb will boot up i maybe i can use smash stack to load homebrew ? after that what do i have to do ? maybe we can use that patch IOS70-65535 to fix this error ?

    @PEYOTE so if you have an patched IOS70-65535 then you unit will be safe to update ? since i understand that this error 003 is caused by an unpatched ISO70?

    if this patched ios can help, maybe you can ask the author of the patched ISO70 to help us out ?
    There is a download in the file with apps, and details regarding what needs to be done in this guide.
    Ipsa scientia potestas est.


    Warning: Piracy is NOT supported. Word your questions carefully.

Page 1 of 202 1231151101 ... LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •