Page 1 of 99 1231151 ... LastLast
Results 1 to 10 of 981

Thread: Hackmii -FIX: no vulnerable ios, black screen, scam freeze

  1. #1
    Senior Member
    DA KINE WiiHacker
    mauifrog's Avatar
    Join Date
    May 2009
    Posts
    9,198

    Smile Hackmii -FIX: no vulnerable ios, black screen, scam freeze

    Hackmii Installer -FIX

    This guide should fix:
    Hackmii- No Vulnerable Ios Found- suck it
    Hackmii- Black Screen
    Hackmii- Scam Screen Freeze


    Format your sd-card- yes, I said FORMAT it
    Standard sd card, 1-2g are best. SDHC are not likely to work
    Remove gc memory cards, gc controllers, usb devices
    Have some free nand space
    Download casper-hackmii-fix.zip
    Extract to sd:\
    If you like, verify md5 checksums with sd:\md5summer.exe from your pc


    Part 1- Install wilbrand or letterbomb to sd:\ (SM 3.0-4.3)

    A) Find your wii's mac address-
    to find your Wii's MAC address, turn on your Wii, click the Wii button in the bottom left of the main system menu, then click Wii Settings, then Internet, then Console Information.

    B) Find your wii's system menu version
    to find your Wii's system menu version, turn on your Wii, click the Wii button in the bottom left of the main system menu, then click Wii Settings. The Wii's system menu version is located in the upper right corner.

    C) Run sd:\Wilbrand GUI.exe from your pc
    Enter your wii's MAC address, today's date, your system menu version, and region
    It is best if your wii's date and time is set to the current date and time.


    D) Copy the /private folder created by Wilbrand GUI to sd:\

    E) If you are unable to run Wilbrand GUI form a PC, you can use letterbomb found @ LetterBomb
    Letterbomb is only setup to server 4.3 system menu's but works the same as wilbrand. Only copy the \private folder to sd:\
    [SPOILER="Other Exploits- bannerbomb, disc, etc"]Possibly you are unable to get your mac address
    If you use other exploits
    rename sd:\boot.elf to bootmii.elf
    rename load.dol to boot.dol
    You must have a patched ios installed, so reload ios in wiimod to the patched ios (36, 236, 249, ect)
    Or use wiimod to install a patched ios236- this will only work on system menu 4.2 and below[SPOILER="Softmods with HOMEBREW CHANNEL installed"]
    Load the HomeBrew Channel
    Launch Multi Mod Manager
    [/SPOILER][SPOILER="2.0-3.4 use the Twilight Hack"]
    [/SPOILER]
    [SPOILER="2.0-3.4 use the Twilight Hack"] -Play The Legend of Zelda: Twilight Princess, make a savegame
    Quote Originally Posted by wiibrew
    Quote Originally Posted by wiibrew
    1. Put your SD card in your Wii and turn it on.
    2. Go into Wii Options --> Data Management --> Save Data --> Wii.
    3. Find your Zelda save, click on it, click "Erase", and click Yes.
    4. Open the SD card and select the "Twilight Hack" save that corresponds to your game region. Note: Some people are having problems with the Wii not "seeing" the save file on the SD card. If you are experiencing this, try setting the archive bit for the data.bin file - in Windows this can be either be done from the file's properties dialog (right click on it in Windows Explorer and check the box) or from the command line using "attrib +a <path to data.bin>". More info at #wiihelp on Efnet.
    5. Click copy and then yes. Now exit out of the menu.
    6. Insert The Legend of Zelda: Twilight Princess game disc and run the game.
      • If you have the USA version of the game, load the "TwilightHack0" or "TwilightHack2" version of the game as appropriate (see above).
      • Otherwise, load the only "Twilight Hack" save game.

    7. Once in the game, either walk backwards or talk to the man standing in front of you.

    If you are using System Menu 3.4, you must immediately put the Twilight Hack to use. Turning off or running some other channel or game will have the System Menu delete the savegame again, and you'll have to start over. Also, 3.4 must also extract twilight-hack-v0.1-beta2.zip to sd:\ replace files when asked.

    -Multi-Mod Manager will load
    [/SPOILER][SPOILER="3.0-4.1 Bannerbomb v1"]Rename sd:\private ->sd:\bb2
    Rename sd:\private-3.0-4.1 -> sd:\private
    alternate BBv1 files-B, C, D, E- If the boot.dol does not load, try these, just extract to sd:\
    -Go to wii settings- data managment- channels- SD- Load the boot.dol
    -Multi-Mod Manager will load
    [/SPOILER][SPOILER="4.0-4.2- Bannerbomb v2"]alternate Bannerbombv2 files-B, C- If the boot.dol does not load, try these, just extract to sd:\
    -Click the SD-ICON from the wii channel menu- load the boot.dol
    -Multi-Mod Manager will load
    [/SPOILER][SPOILER="4.3u/e- Indiana PWNS or 4.3u/j- Smash Stack"]
    Use Indiana PWNS or Smash Stack

    Option 1- Indiana PWNS - Works with 4.3u/e
    -Play Lego Indiana Jones Original. Start a new game, then exit to System Menu.
    -Go to wii settings, data management, save games, wii, SD
    -Click SD, copy Indiana PWNS for your region
    -Play Lego Indiana Jones original, load save game slot 1
    -
    When the game loads, you will be in Barnett College. Walk to the Art Room (through the Courtyard), approach the left character on the podium. When it zooms on him, choose the switch to
    option (two silhouettes, staggered, with an arrow pointing between them).

    Multi Mod Manager Loads

    Option 2- Smash Stack
    - Works with 4.3u/j
    -Load SSBB ntsc, with sd-card removed, make a save file if asked
    -Go to the stage builder, delete all custom stages found, exit the stage builder
    -Exit all the way back to the main SSBB menu
    -Insert SD-CARD, Go back to the stage builder
    Multi Mod Manager
    loads
    [/SPOILER][SPOILER="4.3u/e/j all wiis- use YU-GI-OWNED! or YU-GI-VAH"]
    [/SPOILER]
    [SPOILER="4.3u/e/j all wiis- use YU-GI-OWNED! or YU-GI-VAH"] Works with 4.3u/e/j
    You need
    YU-GI-OH 5D Wheelie Breaker game
    -Play YU-GI-OH 5D Wheelie Breaker, make a savegame
    -Go to Wii settings -> Data Management -> Savegames -> Wii
    -Delete the Yu-Gi-Oh savegame
    -Go to the Sd-card menu
    -Copy the YU-GI-OH5D exploit to the wii
    -Run the game YU-GI-OH 5D Wheelie Breaker and load the savegame file ...
    Multi-Mod Manager loads
    [/SPOILER][SPOILER="4.3u/e/j Return of Jodi"]Requires 1-2g SD card
    Requires Lego Star Wars game
    Play the game once
    Go to wii data managment, savegames
    Delete your lego starwars save file (backup it up if you like)
    Copy the hacked save file for your region from your sd card to your wii
    Start up the game, load the first save slot (on the left, at 0.0%)
    As soon as the level loads, run to the right and you'll see two characters floating. Run to the area in front of them and you'll see "Return of Jodi" show up, press the "A" button on your Wiimote and your boot.elf will run
    Multi-Mod Manager loads

    [/SPOILER][SPOILER="4.3u/e Jabba the HAXX"]Requires 1-2g SD card
    Requires Lego Star Wars game
    Play the game once
    Go to wii data managment, savegames
    Delete your lego starwars save file (backup it up if you like)
    Copy the hacked save file for your region from your sd card to your wii
    Then start the Lego Star Wars and load the first save. When the game starts, walk to the left and stand in front of the big jars of water containing the 2 custom characters. If you see "press A to hack", then press A. This should trigger the exploit which will start the elf loader and load a boot.elf from the root of your SD card
    Multi-Mod Manager Loads

    [/SPOILER][SPOILER="4.3u/e/j Bat HAXX"]Requires 1-2g SD card
    Requires Lego Batman game
    Play the game once
    Go to wii data managment, savegames
    Delete your lego Batman save file (backup it up if you like)
    Copy the hacked save file for your region from your sd card to your wii
    Boot LEGO Batman and load the savegame you just copied. You are now in the batcave, take the elevator on the right side. Then in the trophy room, go to the upper corner and go through the door in order to enter the "Wayne Manor". Now you can select a character. Choose the last enabled one in the lowest row
    Multi-Mod Manager loads

    [/SPOILER][SPOILER="4.3e/k -Smash Stack Pal/KOR"]The files are not yet released, but it is coming. [/SPOILER]
    [SPOILER="4.3- LetterBomb- No Game Disc Required"]Go to the Letterbomb site HERE.
    Quote Originally Posted by BluPhant View Post
    ...1. Get your Wii's mac address:The MAC address of the Wii can be found by:
    From the Wii Channel menu, select "Wii Settings" (the round button on the bottom-left of the screen with "Wii"
    on it)
    Select "Internet," then "Console Settings."
    The MAC address of the Wii console is displayed on the first line.
    2. Format your SD card. Fat32
    Panasonic SDFormat preferred. Dont skip this step.
    3. Download the HackMii installer
    You can use the mac address to build a custom hackmii installer at LetterBomb
    MAKE SURE YOU SELECT YOUR REGION up top
    If you get the captcha wrong, it will RESET your region. This happened to me. If you do, the installer, well,
    in my case hung the wii. Had to hard boot it.
    4. Copy downloaded files to root directory of SD card. I used windows xp.
    5. Put card in wii and start it.
    6. Hit the envelope in the lower right hand corner
    If you dont see the red message with the bomb, hit the - or + buttons to choose a different date.
    7. Click on the big red envelope with the bomb.
    The hackmii installer launches. (note if it hangs, you might not have done step 2, or you might have chosen
    the incorrect region)...
    -Blu
    Hackmii loads
    Go to part 2[/SPOILER][/SPOILER]
    Part 2- Make a Nand Backup
    Open the Wii's message board, located in the lower right corner of the wii
    Go to the date you created wilbrand/letterbomb for
    Open the exploit envelope
    The exploit should load casper, which should then load bootmii
    Make a nand backup

    Use the buttons on the wii console to navigate bootmii.
    Wiimotes do not work, gc controlers do work
    Power = Right, Reset = Select, Eject = left

    If you are unable to make a nand backup, you can run key-dumper.elf from the bootmii sd loader if needed.
    Save your key.bin file to your pc and keep it safe. If you made a full nand backup, also save the nand.bin file.



    Part 3- Install wad files
    Rename sd:\boot.elf to boot-bootmii.elf
    Rename sd:\boot-cboot2.elf to boot.elf

    Now run the exploit from the message board again
    Now casper should load cboot2, which should load wiimod
    Select the Wad Manager
    Press 1, then press A to install all wads
    12 wads should install without error
    Exit wiimod

    You now have a backup HBC 1.03, postloader forwarder channel, cios236, and several other ios installed.


    Part 4- Load Hackmii Installer
    From the main wii channel menu, launch the black Home Brew Channel
    Load the hackmii 1.0 installer
    Install bootmii as boot2 if possible
    Install the HBC

    Note: If hackmii 1.0 fails to install, exit the installer and load hackmii 0.6. Try to install bootmii as boot2 and the HBC.
    There have been a very few cases of older wii's being unable to run the latest hackmii installer, for no known reason. If you are able to install form hackmii 0.6, but unable to install from hackmii 1.0, then most likely there is nothing you can do to get the latest HBC installed. This is ok, since HBC is not needed to have a good hacked wii. If you can not install the newest HBC after following the above instructions, I suggest you use postloader as an alternative. The files are included in this download pack, and the forwarder was installed to your wii.



    Part 5
    You now have a nand backup, and some way of loading homebrew apps. Either the HBC or Postloader.
    Now you must finish your softmod by completing the softmod process, installing the needed cios and priiloader.
    Please complete chapter 2 and 3 of the Guide: Softmod Any Wii

    Note: If you where unable to update to the latest HBC, you will need to use postloader. Postloader is installed to your sd card. After completing the softmod guide, you will need to put these files back on your sd card for postloader to work. They are in the download link above, or on postloader goolge page.
    Last edited by mauifrog; 10-14-2012 at 10:55 PM. Reason: added letterbomb exploit
    Ipsa scientia potestas est.


    Warning: Piracy is NOT supported. Word your questions carefully.

  2. #2
    i have managed to get hbc and neogamma working already but backups will only load through neogamma and not disc channel and also only pal, also when i go on hbc it trys to update but the no vunerable ios comes up. should i delete hbc chanel and neogamma and start again??? all help apreciated

  3. #3
    Senior Member
    DA KINE WiiHacker
    mauifrog's Avatar
    Join Date
    May 2009
    Posts
    9,198
    Well what did you do so far? Install hombrew channel as a wad? Did you update? You can fix your homebrew problem by following steps 3-5 of this guide. It sounds like you already installed your cios since your loading backups. It is possible that other ios of cioscorp where replaced during the update. If you really want it to work again you may wish to reinstall cioscorp, or not and just use a loader. The intend of this post is simply to get HBC and cios up and running, cioscorp working could be another issue for some.

    Since you already have HBC, this guide is more for your situation.
    Last edited by mauifrog; 11-13-2009 at 11:55 PM.
    Ipsa scientia potestas est.


    Warning: Piracy is NOT supported. Word your questions carefully.

  4. #4
    yes like an a*** i updated my wii, tried allsorts 2 install hbc even bought lego indie lol. in the end i used cios38rev14 to install the hbc.wad but still wont update.
    think i will start again using this guide and will post results later.
    im a bit lost tbh because i tried that many different things and remember wii freezing when trying to dop ios36 from another guide.
    tyvm mauifrog

  5. #5
    My Wii is refusing to connect to the Wii Reomte in the second step. No luck with a Gamecube controller either. Can someone please help me?

  6. #6

    Problems with stage 1

    Ok Stupidly i used the safe updater to go to 4.2 which caused the homebrew channel to be upside down. I then deleted it to try and reinstall it which is where the problems started. No vunerable CIOS. I then formated the wii and upgraded via Nintendo to 4.2E and still unable to instal the HBC.

    So to the guide.

    At step 1 I an unable to uninstall IOS249 - the error -1017 is given.
    Step2 2 & 3 do also not work as I guess step 1 needs to complete.

    I am able to overwrite IOS249 though with the stub.

    Any help!!!

  7. #7
    Senior Member
    DA KINE WiiHacker
    mauifrog's Avatar
    Join Date
    May 2009
    Posts
    9,198
    @Dogod- not sure about your wiimote, does it die immediately when the installer starts? We may have to install cios another way.

    @itsrainman- did you change ios from 249 to ios36 to uninstall
    Ipsa scientia potestas est.


    Warning: Piracy is NOT supported. Word your questions carefully.

  8. #8
    I'm not exactly sure why it happened, the Wiiremote had full battery and never died on anything else. Nevertheless, I got it to work after coming back an hour or so later. I'm not sure why, but I'm not complaining. As far as I can tell, it's working perfectly now, so I can only hope it will continue to work. (I also learned my lesson about updating the console without a backup - I wasted almost a full day restoring what I had)

  9. #9
    Senior Member
    DA KINE WiiHacker
    mauifrog's Avatar
    Join Date
    May 2009
    Posts
    9,198
    @Dogod- so did everything here complete for you? If so do disks load from your disk channel or only loader.
    Ipsa scientia potestas est.


    Warning: Piracy is NOT supported. Word your questions carefully.

  10. #10
    Everything completed. I have yet to try running a disc from the loader. I'm backing everything up first. I'll know if it worked either tonight or tomorrow morning.

    EDIT: I was able to run a disc from it! Now comes the real test - running a backup disc.
    Last edited by Dogod; 11-14-2009 at 06:07 PM.

Page 1 of 99 1231151 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •