Results 1 to 10 of 10

Thread: Can't seem to install USB loader GX Please help :(

  1. #1

    Can't seem to install USB loader GX Please help :(

    Hey guys

    My HDD is a 150GB Verbatim HDD

    It is not on the list of usable HDDs but the 160 Version of it is.

    I plugged it into the right USB port

    I made damn sure that I did every step in the 4.2 messie guide correctly. I double checked before every time I made a move the process from A-C took me about 2 hours because of it..then again I do make mistakes and a lot of them.

    When I press the home button on the homebrew channel on the top right hand corner of my screen it said IOS61 v21.29

    Does this mean I did it wrong?

    If I did it wrong will following this guide fix the problem?

    http://www.wiihacks.com/recommended-...s-4-2-wii.html

    I just want to make sure if the numbers on the top right hand corner of my homebrew channel confirm if I did the steps B-C wrong, or if those numbers don't reflect that.

    Thanks

  2. #2
    Senior Member WiiJohn's Avatar
    Join Date
    Jun 2009
    Posts
    5,953
    Mine says IOS61 19.26, the HBC it says is 1.0.6.
    That bit looks OK to me.

  3. #3
    Senior Member
    DA KINE WiiHacker
    mauifrog's Avatar
    Join Date
    May 2009
    Posts
    9,198
    So what is the problem exactly.
    Ipsa scientia potestas est.


    Warning: Piracy is NOT supported. Word your questions carefully.

  4. #4
    The problem is I get a black screen when trying to do step D of messie's guide for 4.2.

    Black screen happens with both USB loader GX and Neo. When I try to go into that part of the guide Step D3

  5. #5
    Senior Member
    DA KINE WiiHacker
    mauifrog's Avatar
    Join Date
    May 2009
    Posts
    9,198
    are you sure part c install your cios without error?
    Ipsa scientia potestas est.


    Warning: Piracy is NOT supported. Word your questions carefully.

  6. #6
    Yes I am almost positive I did that right, I went and did a network install which made it very simple. I also was able to go to "Do not reload IOS" and press A without a problem.

  7. #7
    Just a quick question do I need to have a game in the HDD to get USB loader GX to actually RUN for step D3??? Because I don't have anything in my HDD right now. Just formatted and set to primary and active.

    This is really the only thing I can think of that I maybe doing wrong...

  8. #8
    Senior Member
    DA KINE WiiHacker
    mauifrog's Avatar
    Join Date
    May 2009
    Posts
    9,198
    No, you don't need games on it for it to work.
    Ipsa scientia potestas est.


    Warning: Piracy is NOT supported. Word your questions carefully.

  9. #9
    If the numbers on the top right hand corner of my homebrew channel say

    IOS61 v21.29

    Does that mean that I did Steps B-C of the guide correctly?

    If so maybe the mistake happened some where on the HDD side...
    Last edited by calintz333; 11-11-2009 at 07:54 AM.

  10. #10
    Anyone can confirm please ?

    I would like to know if thats the case so I can ether deal with it if it is or move on to other possible complications. I don't want to mess with it if I did those steps correctly.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •