Page 1 of 2 12 LastLast
Results 1 to 10 of 17

Thread: My modded Wii won't eject a disc that i put in. What should I do?

  1. #1

    My modded Wii won't eject a disc that i put in. What should I do?

    The game wont come out regardless of me pressing eject what can I do? I dont mind taking it apart!

  2. #2
    im not totally sure but the last time i read the wii manual (lol)
    im sure i saw that if the console was modified in anyway the console would have voided warranty? you could always try a small pair of tweezers if you really need to get it out...

  3. #3
    Try holding down the eject button for at least 10 seconds after turning on the console. If that doesn't work (or you've already tried that). Try the following steps.

    1. Unplug Wii from power outlet.
    2. Plug in Wii again.
    3. Press power button.
    4. Press Eject button for at least 10 seconds.
    5. If the disc doesn't eject try holding down the power button for 10 seconds and then the eject button again.

  4. #4
    you might need to open it up and losen the screws that hold your drive in place .. the slot's may not be lining up causing the disk not to eject .. too much, or too little pressure on the drive can cause issues ..

  5. #5
    i get this same problem when i put my chip in the wii but when i take it out it works fine. (d2c,wasabi modchip,sony/verbatim dvd-r at 4x,2x)niothings working

  6. #6
    Member
    Retired Staff Member

    Join Date
    Jun 2008
    Posts
    1,494
    If you are using D2Pro9 then there is new Firmware update that fixes this very problem

    Check out d2pro : Resources

  7. #7
    Inactive *********
    *UNDERSTAFFED*ONLY MK Contestants & ***** Supporters can PM MODS
    jebise101's Avatar
    Join Date
    Jun 2008
    Posts
    425
    Quote Originally Posted by arkalos13 View Post
    i get this same problem when i put my chip in the wii but when i take it out it works fine. (d2c,wasabi modchip,sony/verbatim dvd-r at 4x,2x)niothings working
    are you using a wiiclip?

  8. #8
    yes im using a wii clip v5 wasabi. this problem still persists on happening any other ideas wat can be the problem?

  9. #9
    I got nothing. The only thing I can think of is that the 3.3 update might be messing with it but that's just a shot in the dark my friend.

  10. #10
    Inactive *********
    *UNDERSTAFFED*ONLY MK Contestants & ***** Supporters can PM MODS
    jebise101's Avatar
    Join Date
    Jun 2008
    Posts
    425
    hmm make sure you update the chip to 2.1 usingthe d2prog and make sure that the clip in on the right way and also make sure no pins are getting bent

Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •