How did you resolve the issue?
I just installed my drivekey today and it has been good so far, I went to load Madworld and it shows me the disc and selection to start and goes black. I installed IOS 38,53,55 and still no avail.....It is a PAL version in case this makes a difference....anyone have any ideas to what i could do?
Last edited by cypresskilla; 03-25-2009 at 07:11 PM.
How did you resolve the issue?
Last edited by cypresskilla; 03-24-2009 at 02:26 PM.
Still got the same error,there was a system error and reboot was needed....Im out of ideas ....
Last edited by cypresskilla; 03-24-2009 at 03:43 PM.
First, go to How to fix error 002 >HERE< - GBAtemp.net
and fix the 002 error,follow that on pages 1 and 7,use page 1 with wiiscrubber (pay attention to the settings in the pictures,must be exact) extracting the main.dol and running the Generic Wii Patcher (under Patch the ISO before burning)to search and take out the error fix001 and error fix002....then replace the new main.dol file with WiiScrubber it will rebuild the DVD image at that point. Then burn the new copy at 4x which has been patched from the 001 and 002 error.
Install IOS (put in wad folder on SD Card)
Load using a VMWad Manager, load one and reboot each time.
Then load SoftchipR87 (pit on SD Card in apps)
Go to Softchip in Homebrew
Use the following settings:
SET IOS TO IOS 36 (REV 3090)
Set Video Mode Using:disc Region(Default)
If your chipped with a DriveKeyx4,set it to Block ALL updates
Last edited by cypresskilla; 03-30-2009 at 10:52 AM.
If your not using a backup from another region, just turn off drivekey's update blocking feature. Set it to allow all updates and you will not receive the blackscreen of death. Exit the game and then turn the update blocking feature back on and it will run just fine.
I haven't been brave enough to try this fix on a disc from another region yet, even though I'm on 4.0u.
For some reason the game disc needs to do an update in order to even run. It's almost like it's a game specific update located only on the disc and not within the latest system update (4.0u). Most games work fine, for those that have the blackscreen of death, just update them and then turn the update blocker back on.
Be careful of using disc from different regions though, like I said, I haven't tested this fix for backups from different regions.
Last edited by techn0; 03-30-2009 at 08:59 AM.
Running Madworld with a Drivekey is simple, enter the drivekey config menu and turn on allow updates for your region, reset the wii, toss the Madworld disc in and it'll update the wii and the game will run perfectly. Just be sure you are using a disc for your region otherwise you'll end up in trouble.
I believe you, I just feel safer loading it thru softchipR87(runs perfect too)and setting it to block all updates,with all the trouble i went through to set up my box which is an unhackable Wii its in the LU645125 series, with a d2nothingh drive,I feel I would hate to have something go wrong.Its bad enough I can't run very many softmods through it,lucky I got homebrew on it,so I am told....so thats why I am so cautious..
LU64 with pal version of madworld = dont update from that disc !
Send me a PM if you need any Canadamods.ca support
$9.95 Flat Rate Shipping to Canada & USA
Official Support for Canadamods. I am here to help.
email: firstname.lastname@example.org | website: http://www.canadamods.ca | Phone: +1 416 728 0648
We are the Official Distributors for: P.3Key, Wode JukeBox, WasabiDX, WiiKey, DriveKey, M3i & More - Always Authentic Guarenteed !
Buy Wode JukeBox v2.0 here: Here