Did I install these wads correctly on wad manager 1.7?
Ok so when I installed I went into wad manager 1.7 & it says IOS 249 so I use t, then I leave the option NAND emulation disabled, im not sure what this does? then I select SD card and the wads show and I install and they play correctly but read I should of perhaps used a different IOS
Also I couldnt get the wads to load from my USB stick. In wad manager I was selecting usb 2.0, usb storage and gecko slot a/b etc and kept getting a (ret = -01) although when I use the usb 2.0 option I get a (ret = -02) error. I think this is the USB slot im using as my USB stick is in the recommended slot at back. With an SD card its fine, I leave the nand emulation disabled as usual and select SD slot and the wads show.
Only site donators may send a PM to WiiHacks Staff
WAD Manager 1.7 is pretty old. I think most of us use Wii Mod 3.2 now.
And as for USB mounting in the WAD manager, even Wii Mod 3.2 fails to do so when it says it is supposed to. You're best off using SD cards to load your .wad files.
Click Below for recommended Links
Download the latest:
1 User Says Thank You llaffer For This Useful Post
I'm pretty new to this myself, so take what I say however you want. I was trying to install some wads the other day where I kept getting the same errors on my USB drive. I read around and saw suggestions on using a different IOS (I think 36). I don't really know much about using different IOSs and all but, I tried it and it worked. You might want to wait for folks with experience to better explain this.
1 User Says Thank You jigjoe For This Useful Post
Only Site Donators Can PM Staff
You are right !
Originally Posted by jigjoe
We recommend using cIos236,249,250 and Ios36...If one don't work try another.