Results 1 to 6 of 6

Thread: Can't boot to USB Loader GX

  1. #1

    Can't boot to USB Loader GX

    I followed the Softmod ANY Wii tutorial and everything loaded fine. Thanks!

    However, when I tried to set USB Loader GX to boot, it doesn't work. Initially, CFG USB Loader wanted me to format my 500GB FAT32 USB drive.

    After messing around with that for a while, and trying to use the WFBS Manager, which refused to format my drive. I went back to FAT32, reloaded a game on it, and tried to autoboot to USB Loader GX again. (I tried NTFS and exFAT as well)

    This caused it to go to a blank white page (from Priiloader) and a blank black page (from boot). If I hit reset it goes to the Homebrew Channel.

    Booting to USB Loader GX from Homebrew or the Wii system menu works normally, and functions properly.

    I did some searching on the site, but I'm lost.

  2. #2
    Junior Member dniMretsaM's Avatar
    Join Date
    May 2010
    Location
    NE Ohio
    Posts
    1,142
    What version of Priiloader are you using? How are you autobooting? Using a Priiloader forwarder or the actual app's boot.dol? You can also try reinstalling the file and seeing if that helps.
    SM 4.1 (v499) - BootMii/IOS v1.5 - HBC 1.1.2 - Priiloader 0.8b6 - d2x v9(r49) - WiiFlow 4.1.1
    [SPOILER=Must read threads]Thinking About Hacking a Wii? Read This First.
    Brick Prevention
    Softmod ANY Wii (updated 03/30/2013)
    How To Run & Post A System Check[/SPOILER][SPOILER=Helpful threads]USB Compatibility List
    FAT32 Formatting
    WiiFlow Guide
    Troublesome Games And Their Solution
    Error Index[/SPOILER]
    Quote Originally Posted by sven
    [16:26:34] i'm never sarcastic.
    [16:26:41] feel free to quote me on that.

  3. #3
    Thanks for responding quickly.

    I have Priiloader 0.7.

    I went into the Priiloader settings and selected "installed file" for autoboot. I loaded the file "USB Loader GX (AHBPROT Available)" that showed up in load/install file menu. It also shows WiiFlow, NeoGamma AHBPROT Available), USBLoader and WiiMC (AHBPROT Available).

    WiiFlow boots fine, but I haven't tried the others.

    These files, except WiiMC, were all loaded when I did the Softmod ANY Wii steps, so I don't know if the one I'm trying to use is the actual app's boot.dol. I'm guessing no?

    What should I try to reinstall, USB Loader GX?

  4. #4
    Can you load GX from the Homebrew channel, or the Forwarder channel on your system menu?
    [spoiler="Baby Daddy's System"]
    Boot2 Wii (originally White, now silver)
    Western Digital 500 GB MyBook USB Hard Drive (WDBAAF5000EBK-00)
    FAT32
    Link to my SysCheck [/spoiler]
    [spoiler="Required Reading"]
    The Basics
    Softmod ANY Wii
    PriiLoader
    Fat32
    WiiHacks Tutorial Forums
    If all else fails...
    [/spoiler]

  5. #5
    Yes. It loads fine any other way.

  6. #6
    Junior Member dniMretsaM's Avatar
    Join Date
    May 2010
    Location
    NE Ohio
    Posts
    1,142
    Reinstall the file in Priiloader, not the actual app.
    SM 4.1 (v499) - BootMii/IOS v1.5 - HBC 1.1.2 - Priiloader 0.8b6 - d2x v9(r49) - WiiFlow 4.1.1
    [SPOILER=Must read threads]Thinking About Hacking a Wii? Read This First.
    Brick Prevention
    Softmod ANY Wii (updated 03/30/2013)
    How To Run & Post A System Check[/SPOILER][SPOILER=Helpful threads]USB Compatibility List
    FAT32 Formatting
    WiiFlow Guide
    Troublesome Games And Their Solution
    Error Index[/SPOILER]
    Quote Originally Posted by sven
    [16:26:34] i'm never sarcastic.
    [16:26:41] feel free to quote me on that.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •