Results 1 to 9 of 9

Thread: Unable to play copied games burned onto dvd's

  1. #1
    New Member
    Join Date
    Jun 2012
    Location
    Florida
    Posts
    4

    Us Unable to play copied games burned onto dvd's

    Great info online. I followed everything and re softmodded my wii 4.1u. After I finished, I was able to successfully open and play pinball using neogammer. After turning off my wii and coming back to it later, Neogammer would not accept the disc. In fact, it did even seem to try to patch it like it did the first time. What do you suggest that I do now in order for Neogammer to accept my copied game discs? I am using Verbatim DVD+R discs.

    I appreciate your reply on this.

    Thank you very much

  2. #2
    I would suggest using dvd-r rather than +r dvds. The Wii just doesn't seem to like dvd+r!

    Sent from my Motorola Electrify using WiiHacks

  3. #3
    New Member
    Join Date
    Jun 2012
    Location
    Florida
    Posts
    4
    Thanks for the suggestion. I'll try it out.

  4. #4

    Question help me

    i had a wii 4.3 then downgraded it to 4.1, anyway i took a super mario galaxy 2 iso and burned it but when i put it in my wii it has problems reading it i use neogammer, loading the iso works but the wii has problems reading it and it says in mario galaxy 2 style the wii cant read the disc i also listen to the sounds the wii makes and it doesn't sound right i need help i have a wii chip GC2-D2C
    Last edited by Sammy Sagastume; 07-05-2012 at 03:44 PM.

  5. #5
    Quote Originally Posted by Sammy Sagastume View Post
    i had a wii 4.3 then downgraded it to 4.1, anyway i took a super mario galaxy 2 iso and burned it but when i put it in my wii it has problems reading it i use neogammer, loading the iso works but the wii has problems reading it and it says in mario galaxy 2 style the wii cant read the disc i also listen to the sounds the wii makes and it doesn't sound right i need help i have a wii chip GC2-D2C
    look on the bottom of your wii there is a serial # that start's with LU with numbers behind it like LU64****** all you need to know is the 2 numbers after LU if the numbers are greater than 64 chances are that you have the Nintendo after September of 2010 and that has a d3-2 chip set in it so you will never be able to use disc's

  6. #6
    Banned
    Join Date
    Apr 2009
    Location
    Schenectady,NY
    Posts
    3,759
    Quote Originally Posted by Sammy Sagastume View Post
    i had a wii 4.3 then downgraded it to 4.1, anyway i took a super mario galaxy 2 iso and burned it but when i put it in my wii it has problems reading it i use neogammer, loading the iso works but the wii has problems reading it and it says in mario galaxy 2 style the wii cant read the disc i also listen to the sounds the wii makes and it doesn't sound right i need help i have a wii chip GC2-D2C
    Your wii can play back-ups.
    This could mean your drive is on it's way out.

    Try cleaning it, go to a game store and see if they have a cleaning kit for the wii Disc drive.
    Chances are ,your drive is dieing.

    P.S.Make sure your burning the game at the lowest speed possible 2x or 4x and are using verbatim disc.
    Last edited by Jax; 07-07-2012 at 05:33 AM. Reason: Added More Info.

  7. #7

    Question close but not there

    ok so i burned the game again at the lowest speed, i got my wii in 2009 used that was used from 2008 or 2007 then i put it in the wii and the game shows up on the disc channel but it errors when i start it so i launch it from neogamma and it works fine but in the middle of the game it'll say the disc could not be read, i installed dvdx, and i use memorex dvd+r's so what now?

  8. #8
    Use dvd-r, not dvd+r! The Wii doesn't like dvd+r!

    Sent from my Motorola Electrify using WiiHacks

  9. #9
    ok thanks for the tip

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •