Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: Wii 4.3 banner brick

  1. #1

    Unhappy Wii 4.3 banner brick

    Hello mates,my wii's banner bricked ,its on 4.3e and i ve order a wiikey 1 because i didn't have priloader installed,so i wanted to ask if i could use the wiikey to auto boot wad manager with savemifrii(yeah i ve modded my gc controller) and uninstall the bad wad but i haven't disabled the diagnostic disc check and my original games won't boot on the recovery mode(savemiifrii). i wanted to ask if the wiikey forces the wii to boot the disc either i have disabled or enabled the diagnostic disc check because if it doesn't my wii is dead.

  2. #2
    Senior Member
    DA KINE WiiHacker
    mauifrog's Avatar
    Join Date
    May 2009
    Posts
    9,198
    You need to autoboot ssbb-pal patched to autoboot. You can boot recovery disk if ios80 is patched.
    Ipsa scientia potestas est.


    Warning: Piracy is NOT supported. Word your questions carefully.

  3. #3
    so il just patch super smash braw,l patch it to auto boot and do the smash stack?or if i am lucky and my ios80 is patched i can boot universal unbrick?

  4. #4
    Senior Member
    DA KINE WiiHacker
    mauifrog's Avatar
    Join Date
    May 2009
    Posts
    9,198
    Quote Originally Posted by Haralampos View Post
    so il just patch super smash braw,l patch it to auto boot and do the smash stack?or if i am lucky and my ios80 is patched i can boot universal unbrick?
    If ios80 is not patched, autoboot ssbb-pal and do smash stack
    If ios80 is patched you would want to autoboot the B.L.I.N.D. brick fix disc.

    You need to uninstall the bad channel to fix. You can do that via wad or title manager, both can be done from wiimod or B.L.I.N.D.
    Ipsa scientia potestas est.


    Warning: Piracy is NOT supported. Word your questions carefully.

  5. #5
    ok il try them thanks mate

  6. #6
    My wiikey 1 broke so i ordered a wiikey fusion which is solderless and i installed it,i have the option to autoboot with my gc controller but the blind brick fix,the wad manager auto boot and even my original games wont work,after the 4.3e text pops in the right-down corner then it disappears and the wii makes that sound when you start a game but then the screen goes just black.

  7. #7
    I mean why the heck doesn't my wii boot the games or the software im putting on it,since the 4.3e text disappears then the wii DOES RECOGNIZE the software but why the hell doesn't it run them???the screen just goes black, whyyy?

  8. #8
    Senior Member
    DA KINE WiiHacker
    mauifrog's Avatar
    Join Date
    May 2009
    Posts
    9,198
    Try to load a burned 1:1 rip of a PAL game patched to autoboot. Specifically, try to load a 1:1 rip of SSBB-pal patched to autoboot. I am guessing that the disc is just not patched to autoboot. It sounds like the wii is defiantly reading the disc.
    Ipsa scientia potestas est.


    Warning: Piracy is NOT supported. Word your questions carefully.

  9. #9
    i did make auto boot the ssbb pal with the autoboot creator and yes my wii DOES read the disc(to tell the truth the wiikey fusion has an sd card slot which is working as the wii drive and everything i v been puting on my sd as an iso my wii DOES read it IT WORKS as a drive!,the 4.3 text disappears it's the same as when i put any of my original games on the drive and autobooting them with my gc controller)but as i said before the screen goes black and then nothing and what do you mean 1:1 burned game?

  10. #10
    And since i can go to the 4.3e text black screen with my gc controller and from there boot games do i still need to patch any software i am putting(like blind,ssbb-pal) to auto boot?? becuase i have patched them with the autoboot creator as i said before but it still doesnt work.

Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •