Search:

Hi,

Yes, that is repairable if its fully bricked.

PM me if you need assistance.

Just buy a replacement GC port?

I have loads of them.

You could solder in the GC ports if you really wanted to.

Bootmii (and the HBC installer) need updating really, but I doubt there is much interest these days

D1A is not a Wii drive type. you are looking at the wrong chip or reading the wrong part

That flasher will not work. It's a spi flasher, not a programmer for the NAND directly.

There was a new programmer released recently - progskeet or something like that. That one would work for...

just downgrade from 4.3. its within the softmodding guide as an optional step.

If the backup you took was NTSC/U then restoring it will put you back on that.

cBoot2 has permissions to delete and install IOS's... I would goto IOS manager and delete IOS249 (which is a stub) then install CIOS249 (you need the wad from this site, someone should be able to...

you could try and cboot2 into MMM and install the wads that way.

hes taken it apart, warranty is already void.

Did you try the component cables? as its sounding like wifi module or AV encoder.

Sounds like bluetooth module.

Do not update to 4.3

EpicGamer, do not tell people to update to 4.3 as it can cause fixable bricks to become completely unrepairable.

If you upload your existing nand.bin and keys.bin and send me the link, I will compile a new nand for you.

Bad blocks - pretty much all nand chips have bad blocks from the factory - they are...

Its about 20 seconds or so.

Try this:

ohneswanzenegger - GBAtemp.net


Basically it uses your nand.bin and keys.bin, deletes all the data but keeps the bad block locations and then creates...

If you can get to the health and safety screen when restoring your nand, but cant after using the formatter - its not completing correctly.

If you can get into the health and safety screen, you...

Borrow/buy another drive and see if it fixes the problem.

2 reasons for that:

1, Wii/bootmii/nand formatter doesnt like your SD card much - try another one
2, you are using an OS other than Windows (mac usually) that adds extra files into the wad folder...

Your post doesnt make much sense.

If its the Wifi module, savemiifree will show nothing - which means it could be wifi, full brick or other hardware issue.

If savemiifrii DOES work, but the wii...

sounds like its probably the drive on its way out.

You are correct unfortunately :(

Cant Jtag a Wii.

You cant jtag a wii.

whats the serial number of the console

updates dont fix banner bricks

I have not had an AV encoder that has been completely broken yet.

They always work with 1 cable type or the other. So I would try that, as streamline suggested.

You can restore a nand backup, even if you have bootmii as an IOS. But, if you can get into bootmii, then you have a working system menu and can fix your problem a better way anyway.

buy a gamecube pad.

dealextreme.com