01-04-2011, 02:34 PM
01-04-2011, 02:44 PM
Hey, first off I would like to say thanks for this guide. Nicely put.
I do have a question. my wii was already soft-modded and is running 4.3u, I did the steps in this guide because I wanted to be able to run back-ups and install priiloader to prevent bricking.
Problem: After following this guide I notice that the Disc Channel is now asking me to do an update in order for me to use it. This happened after I did the steps to this guide.
Notes: I did follow the steps, I did enable the blocks to updates in MMM. I tried installing DarkCorp, but I noticed that it restarted the wii, so I'm unsure whether or not it was installed successfully and/or if that's the cause for the wii wanting an update for the Disc Channel.
Anyway, any help will be much appreciated, thank you!
Edit: Restarted my wii, ran/updated HBC and restarted again. Disc Channel seems to be working fine.
Last edited by DayumQuitPlayin; 01-04-2011 at 02:54 PM.
Reason: Problem Resolved
01-04-2011, 02:47 PM
It's very clear what to do when you have a Japanese WII - extract Hackmii_0.8_yu-gi-vah-J.zip to sd:\)
But it's unclear about what to do when you have Euro 4.3E Wii.
If i extract both of them to SD, the second will overwrite the first one. Do i extract one of them? Which one then?
01-04-2011, 04:05 PM
Can i add more wads at stage 2? and hdd issue
hi, thanks for the guide i've used it a couple of times now on mine and friends wii's, all worked brilliantly, i've since found a couple of game which have needed updated wads, my questions are:-
1. if/when i softmod another wii, can i just add the new wads to all the wads already to be installed at stage 2?
2. i've had an issue with a portable hdd (Seagate 500Gb portable hdd, part no 7636490013881), cfg won't recognise it at all, neither formatted as wbfs or ntfs with wbfs folder, gx loader see's it tho, can't figure that one out!?
any advice would be much appreciated, bb.
01-04-2011, 04:49 PM
softmod on 4.3u question
So I started to softmod my Wii 4.3u with this guide. I did all of chapter 1 using indiana pwns guide. Now my question is do I need to do all the chapters? I want to use usbloader with this softmod as we all do. I just want to make sure that I don't skip a step. Thanks for the help in advance
01-04-2011, 07:42 PM
NeoGamma not playing backups
I know the disks are good because I softmodded a 4.3U with this guide and they played just fine, but now the 4.2U Wii I softmodded will not read the disks. Thanks in advance for any help, also its a pretty old model so I didn't think i would have a problem S/N: LU32
01-04-2011, 08:04 PM
i cant seem to get past the bootmii test. it says continue but wii control not working..any help please. sorry to be such a noob
01-04-2011, 08:58 PM
arithmatic505, could u plug in a GC controller to ease bootmii manipluation ?
billybunter1968, 1/ new or more wad files can be co-existed in the sd card. and, select the right one when you proceeding installation with WAD_mgr. ; 2/ while GX could work on the 500GB drive on the same console, try to use Cfg_v6x_222.
Last edited by billyhome; 01-04-2011 at 09:04 PM.
01-04-2011, 11:41 PM
arithmatic505, do u mean where u use bootmii to make the nand backup? if so, u use the power and reset buttons on the console to navigate, that did baffle me for awhile!
billyhome, thanks for the response, are you saying that i could cause conflicts if i just installed all wads after adding new ones? or is it a case of removing the older wads, which the newer ones have updated or am i barking up the wrong tree!?
01-05-2011, 12:48 AM
Hi can you tell me if there is a way to add my covers to my wii manually once I have downloaded them using Wii Game Manager?
Tags for this Thread