Page 329 of 1820 FirstFirst ... 2292793193273283293303313393794298291329 ... LastLast
Results 3,281 to 3,290 of 18194

Thread: Guide: Softmod ANY Wii

  1. #3281
    New Member
    Join Date
    Nov 2010
    Posts
    8
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Chapter 1 part 3

    "Press Power, Power, Power, Reset, Reset"? Is that a command... or actual wii power and reset of the machine?

    And does a bigger size SD card will work too?

    Thanks alot!

  2. #3282
    Member
    WiiHacks Staff
    Moderator

    Virtual Welcome Agent
    Only site donators may send a PM to WiiHacks Staff
    vinatec's Avatar
    Join Date
    May 2010
    Location
    Göttingen, Germany
    Posts
    1,903
    Thanks
    266
    Thanked 710 Times in 543 Posts
    Blog Entries
    1
    buttons on the console front, right.
    The Hackmii installer is very pickie and the results scatter when using different cards.
    Heard people saying it works with sdhc but i won't trust on that. more complains come from users with SDHC or mini/micro cards in an adapter.
    use a 2GB SD card and everything should be fine (brand: sandisk has the highest success rate, an official/nintendo wii card for example)
    good luck

    <--suggestions helped? press Thanks

  3. #3283
    Member
    WiiHacks Staff
    Moderator

    Virtual Welcome Agent
    Only site donators may send a PM to WiiHacks Staff
    vinatec's Avatar
    Join Date
    May 2010
    Location
    Göttingen, Germany
    Posts
    1,903
    Thanks
    266
    Thanked 710 Times in 543 Posts
    Blog Entries
    1
    Got stuck? ---> Error index

    did the md5 sums verify correctly ?
    you should try to reinstall them. reformat your sd card put the files back on, try to install those files one by one on your next try.

    <--suggestions helped? press Thanks

  4. #3284
    New Member
    Join Date
    Nov 2010
    Posts
    8
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Sorry to bother again...but just not sure if I understand well:

    Load HBC, press -HOME-, launch Bootmii
    Make a nand backup
    Press Power, Power, Power, Reset, Reset (or use gc-controller)
    Power = Right, Eject = Left, Reset = Select
    Once the backup is complete, exit bootmii to HBC
    Backup your Bootmii files to your PC


    So I start the Nand backup and then do power, power, power, reset, reset.........before the backup is completed (does Power shut down the wii??) Or I'm supposed to wait until it is completed and do the power thing?

  5. #3285
    Member
    WiiHacks Staff
    Moderator

    Virtual Welcome Agent
    Only site donators may send a PM to WiiHacks Staff
    vinatec's Avatar
    Join Date
    May 2010
    Location
    Göttingen, Germany
    Posts
    1,903
    Thanks
    266
    Thanked 710 Times in 543 Posts
    Blog Entries
    1
    the button pressing is already the routine to start the nand backup. just install it go to bootmii and see for yourself if the wii turns off when pressing power (choose) and afterwards reset (select). nand backup takes 30-45 mins (be sure to save the files to your PC), then you can exit directly to the hbc from bootmii by choosing and selecting again.. you will figure it out once you get to that part.
    good luck

    <--suggestions helped? press Thanks

  6. #3286
    New Member
    Join Date
    Dec 2009
    Posts
    29
    Thanks
    2
    Thanked 6 Times in 4 Posts
    Really, Really cool guide. This was nice. I had a wii i modded with the 4.2 guide (have done many), but the hdd wasnt showing up in loader. Only in Homebrew. This worked great.... I only have a few questions though..... What would I have to change, delete, and add, and where, to do the following: Keep the original Hombrew Channel, not install the USB Configurable Loader Channel & the LoadMii Channel; Install the WiiFlow 2.1 forwader, Internet channel, & Netflix channel (I have all these wads. I usually install them with the wad manager). So On the 3 downloads, what should I delete and where should I add the other wads. I really like the way it installs ALL wads. That is cool. I just wanted to tweek em. Everyone I mod like the Wiiflow better than USB Loader(s). Thanks Again!!!!!!!

  7. #3287
    Senior Member
    DA KINE WiiHacker
    mauifrog's Avatar
    Join Date
    May 2009
    Posts
    9,180
    Thanks
    307
    Thanked 9,572 Times in 2,972 Posts
    Blog Entries
    15
    Quote Originally Posted by realisticmusic View Post
    Really, Really cool guide. This was nice. I had a wii i modded with the 4.2 guide (have done many), but the hdd wasnt showing up in loader. Only in Homebrew. This worked great.... I only have a few questions though..... What would I have to change, delete, and add, and where, to do the following: Keep the original Hombrew Channel, not install the USB Configurable Loader Channel & the LoadMii Channel; Install the WiiFlow 2.1 forwader, Internet channel, & Netflix channel (I have all these wads. I usually install them with the wad manager). So On the 3 downloads, what should I delete and where should I add the other wads. I really like the way it installs ALL wads. That is cool. I just wanted to tweek em. Everyone I mod like the Wiiflow better than USB Loader(s). Thanks Again!!!!!!!
    You can remove the loadmii and cfg usbloader wads from the wad folder and add any wads you like before doing chapter 2 part 1. I recommend having one forwarder channel installed.
    Ipsa scientia potestas est.


    Warning: Piracy is NOT supported. Word your questions carefully.

  8. #3288
    New Member
    Join Date
    Feb 2010
    Posts
    35
    Thanks
    0
    Thanked 0 Times in 0 Posts
    i have a question, i already softmodded my WIi a while back and i have always use Neogamma R7 to load games. DK shows on my Wii channels but does not want to load. What can i do? should i update my Neogamma? or ISO? i dont think i should go thru all those steps again when the wii is already Softmodded and is at 4.2U

  9. #3289
    New Member
    Join Date
    Nov 2009
    Posts
    66
    Thanks
    11
    Thanked 9 Times in 3 Posts
    i made a video using this guide if you want to post it to the thread. (although i didn't install priiloader in this vid which i just noticed) is it okay to reference wii hacks in the description? it's not posted yet but will be soon.

    YouTube - Wii 4.3u Softmod
    Last edited by twiiges; 11-25-2010 at 09:19 AM.

  10. #3290
    New Member
    Join Date
    Nov 2010
    Location
    Austin
    Posts
    13
    Thanks
    1
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by vinatec View Post
    Got stuck? ---> Error index

    did the md5 sums verify correctly ?
    you should try to reinstall them. reformat your sd card put the files back on, try to install those files one by one on your next try.

    yes the checksum verify was ok. I redo the installation and got the same failure. If I did the checksum verify again after the installation I noticed all the 3 wad (cIOS222,247,249) failed plus also the bootmii... FYI, before follow this guide my will already has the bootmii and HBC installed. I did redo the steps of this guide for bootmii and HBC but I did not choose the option to remove them first before reinstall. Do u tihnk this might be the issue? What Should I do? Thx.
    bootmii\armboot.bin ERROR: Checksum did not match.
    wad\cIOS222[38]-v4.wad ERROR: Checksum did not match.
    wad\cIOS247[37]-v20.wad ERROR: Checksum did not match.
    wad\cIOS249[38]-v17.wad ERROR: Checksum did not match.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •