Page 1411 of 1826 FirstFirst ... 41191113111361140114091410141114121413142114611511 ... LastLast
Results 14,101 to 14,110 of 18251

Thread: Guide: Softmod ANY Wii

  1. #14101
    Forum Administrator BluPhant's Avatar
    Join Date
    May 2010
    Location
    New England
    Posts
    2,354
    Thanks
    218
    Thanked 1,282 Times in 723 Posts
    4.3 would be defined as "all variants of 4.3" meaning 4.3u, 4.3e, whatever. The designation indicates the geographical area (u=usa, e=europe, etc)

    So.... yes, the letterbomb does in fact work nicely on 4.3u.

    -Blu

    Softmod ANY Wii
    | USB-FAT32 | Error Index | Chat!
    An Introduction To Wii Hacking - MUST READ for all new Wii Hackers
    If I have been of help to you, please click the "Thanks" icon to the left.



  2. #14102
    New Member
    Join Date
    Dec 2011
    Posts
    4
    Thanks
    0
    Thanked 0 Times in 0 Posts
    I have another problem now...I'm at the part where I'm getting the red envelope with a bomb to show up on my wii...but when I click on it, it jsut opens up a normal envelope with my play time?

    Ok....now I'm at the part where I'm on bootmii where the multi mod manager starts...and I can't move down to select wad manager because as SOON as multi mod manager starts...my wiimote turns off and does not come back on unless I turn the wii off. Also...after a few seconds, the multi mod manager screen turns into a bunch of dots just floating up the screen. Help please?
    Last edited by cjizzle; 06-01-2012 at 07:08 PM. Reason: please don't double post, use the edit button

  3. #14103
    New Member
    Join Date
    Jun 2012
    Posts
    8
    Thanks
    0
    Thanked 0 Times in 0 Posts
    I bought along with my nintendo wii the game Zelda Skyward Sword.
    It was necessary to update from Nintendo in order to play this game. Now i want to softmod my wii, is it possible following these instructions?

  4. #14104
    Jax
    Jax is offline
    Senior Member
    Retired WiiHacks Staff
    Jax's Avatar
    Join Date
    Apr 2009
    Location
    Schenectady,NY
    Posts
    3,665
    Thanks
    3,219
    Thanked 1,337 Times in 1,114 Posts
    Quote Originally Posted by kaiocesar View Post
    I bought along with my nintendo wii the game Zelda Skyward Sword.
    It was necessary to update from Nintendo in order to play this game. Now i want to softmod my wii, is it possible following these instructions?
    Yes, it will work on any Wii!

    Just remember to read the guide a few times, Then proceed.

  5. #14105
    New Member
    Join Date
    Jul 2011
    Posts
    3
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Dear friends,

    Wii 4.3u

    I have done in the past the procedure and goes well. For me and for others. Very helpfull and "clear" guide.
    Thank you!

    Now after some months, I see that almost all of the "components" are updated.
    My question is :

    - Can I do the same stages all over again, for update ALL the modules?
    And I mean from stage 1 (Game exploit hack method).

    -The new ones will overwrite the old ones, or the Wii memory will fill with duplicates?

    -Will my saves remain intact, or I must backup everything before I begin?

    Also one more question.
    Some friends have older version of Wii. Can I update to the newer (as log as 4.3 is on the go and not newer) and then apply the hacks?
    If so, will the Wii inform me if a newer version 4.4 lets say is available BEFORE I download/Update it?

    Waiting for respond.

    Thank you in advance.
    Last edited by b1tmaster0; 06-02-2012 at 04:25 AM.

  6. #14106
    New Member
    Join Date
    Feb 2012
    Posts
    93
    Thanks
    46
    Thanked 0 Times in 0 Posts
    hi i have the app pack v3b installed, should i overwrite it in order to install app pack v4?
    thank you

  7. #14107
    New Member prismbutterfly's Avatar
    Join Date
    Jun 2010
    Posts
    1
    Thanks
    1
    Thanked 0 Times in 0 Posts
    EDIT. I got it fixed partially. I reformatted the hd to fats32 with no partition and put the apps on it. Theusb loader go works from it but not wiiflow or neogam,a but that's ok. Is there a way I can remove hem from the channel list.? Also can I boot auto to the usbloader instead of the wii menu?

    Hello,
    I have followed this guide using the letterbomb. I have a 4.3u system (it was originally 4.1 but I let it upgrade a while back). I went through everything fine with no errors. My wii now shows the homebrew channel as well as the various loaders. When selecting them, 2 of the loaders freeze up ... usb loader gx and usb configuration loader (not positive of the names the wii is in the other room). and 2 of them simply reboot the wii, neogamma and wii flow. I have a hard drive that is listed as working on your site and I have it formated primary wbsf and then a 5 gig fat32 where I put the loaders (though they show up even with the hard drive unplugged). I'm sorry I don't know much about mods and things, I simply followed the excellent tutorial here.

    On a side note I'd like to say the reason I want to use the usb hard drive is I've recently become physically handicapped and it would be wonderful be able to switch games without using the discs. I am NOT interested in pirating.
    Thanks,
    Brenda
    Last edited by prismbutterfly; 06-02-2012 at 10:23 AM.

  8. #14108
    WiiHacks Staff
    Only Site Donators Can PM Staff
    Senior Moderator
    Game Master
    cjizzle's Avatar
    Join Date
    May 2009
    Location
    Southeast Ohio
    Posts
    6,265
    Thanks
    1,475
    Thanked 2,602 Times in 1,917 Posts
    Quote Originally Posted by b1tmaster0 View Post
    Dear friends,

    Wii 4.3u

    I have done in the past the procedure and goes well. For me and for others. Very helpfull and "clear" guide.
    Thank you!

    Now after some months, I see that almost all of the "components" are updated.
    My question is :

    - Can I do the same stages all over again, for update ALL the modules?
    And I mean from stage 1 (Game exploit hack method).

    -The new ones will overwrite the old ones, or the Wii memory will fill with duplicates?

    -Will my saves remain intact, or I must backup everything before I begin?

    Also one more question.
    Some friends have older version of Wii. Can I update to the newer (as log as 4.3 is on the go and not newer) and then apply the hacks?
    If so, will the Wii inform me if a newer version 4.4 lets say is available BEFORE I download/Update it?

    Waiting for respond.

    Thank you in advance.
    -Start at the "softmods with homebrew channel installed" spoiler
    -New will overwrite old
    -Saves remain intact

    -we rarely ever recommend doing an official update. Use bannerbomb on the older system menu and do the IOS update section.

    Quote Originally Posted by taltal View Post
    hi i have the app pack v3b installed, should i overwrite it in order to install app pack v4?
    thank you
    You can do that it you want to. Not 100% certain the config files will match, but at worst you will just have to delete them. Post back if you have any issues.

    Quote Originally Posted by prismbutterfly View Post
    EDIT. I got it fixed partially. I reformatted the hd to fats32 with no partition and put the apps on it. Theusb loader go works from it but not wiiflow or neogam,a but that's ok. Is there a way I can remove hem from the channel list.? Also can I boot auto to the usbloader instead of the wii menu?

    Hello,
    I have followed this guide using the letterbomb. I have a 4.3u system (it was originally 4.1 but I let it upgrade a while back). I went through everything fine with no errors. My wii now shows the homebrew channel as well as the various loaders. When selecting them, 2 of the loaders freeze up ... usb loader gx and usb configuration loader (not positive of the names the wii is in the other room). and 2 of them simply reboot the wii, neogamma and wii flow. I have a hard drive that is listed as working on your site and I have it formated primary wbsf and then a 5 gig fat32 where I put the loaders (though they show up even with the hard drive unplugged). I'm sorry I don't know much about mods and things, I simply followed the excellent tutorial here.

    On a side note I'd like to say the reason I want to use the usb hard drive is I've recently become physically handicapped and it would be wonderful be able to switch games without using the discs. I am NOT interested in pirating.
    Thanks,
    Brenda
    You can delete them from data management if you wish. A simple fix would be to find the config files for the non-working apps and change them to point towards the usb device instead of the sd card. Wiiflow is usb/apps/wiiflow.ini: change the line data_on_usb=no to data_on_usb=yes.

  9. 2 Users Say Thank You to cjizzle For This Useful Post


  10. #14109
    New Member
    Join Date
    Jun 2012
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Question

    Hi. I'm new to this forum and I have a question. I have a black Wii and when I bought it it has Valbox Loader(HDD Loader) but it does not come with HBC so I don't think it is modded already. I'm not sure of its version though. So my question is, is this mod compatible with this Wii?

  11. #14110
    WiiHacks Staff
    Only Site Donators Can PM Staff
    Senior Moderator
    Game Master
    cjizzle's Avatar
    Join Date
    May 2009
    Location
    Southeast Ohio
    Posts
    6,265
    Thanks
    1,475
    Thanked 2,602 Times in 1,917 Posts
    Wow that is an old loader!!! You will be fine using this guide. It will overwrite everything that it needs to.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •