ok i am trying to softmod my wii (4.3u) i did all but i wanted to downgrade so i went to this partok so i did all of that it sed there was one error (103 i think) and it restarted my wii now all my wii does is shakes the screen if any of you know what this is its very anoying. so i worked my way into the homebrew to try and see whats wrong and when i clicked on the region change item (ARCmod06_Offline) now keep in mind my screen is still shaking up and down like a scrolling action i try and get to the iso to install (236) i get that to load and it tells me that it is in process of changing and that it cant help me plzz help i am a poor person and cant aford a new wii***********************************[/COLOR][/SIZE][SPOILER="Optional- Region Change Wii"]If you want to change the region of your wii, do it now
This is most common when changing Korean/Japan wiis to USA
DO NOT RESTART THE WII UNTIL THIS PROCESS IS COMPLETE
extract to sd:\
Verify 4.1-region_change.md5 check sums
In MMM select App Manager
Select ios236- press A
Read the WARNING- press 1
Use the wiimote, go down to-"system menu 4.1 installer"
Select "System Menu Region"
Change the region to USA (or Europe or Jap)
Go down to "Auto set from System Menu Region" -Press A
"WARNING: AREA: SysMenu MISMATCH!" will appear above- this is normal
Also, ensure the ELUA is marked as read
Do not install system menu 4.1
Exit ARC-mod to HBC (do not restart)
[SIZE=2][COLOR=Black][SIZE=3]HBC will loads
both u have to instal the iso from the region change to get the downgrade to work (mmm told me that i needed a iso which was in the usa folder) so i started the transfer to 4.1u useing the usa region change
usa to usa i want to downgrade to 4.1 from 4.3 and the only way i could find was to do this tutorial and do the regon change
Last edited by narse1979; 10-05-2010 at 01:49 PM.
Can this superb step-by-step guide be used to upgrade a Wii v3.1E which is already soft-modded to 4.1? Or this is guide only for virgin Wiis?
If I can use it, as the Wii's already soft-modded, do I still need to follow ALL of the steps or can some be cut out due to it already being soft-modded?
Thanks in advance
Yes, you can use this guide with no problem. It will overwrite anything you have installed now. If you have HBC already install then just start with Chapter 2. You should do all the steps from there on out including installing Priiloader.
If you haven't made a nand backup then I suggest you do so by referring to the steps in chapter 1.