Please use the edit Function.
You are allow to bump the thread, but only after the 24 hour period.
I tested it, wiiflow still blackscreens after the DIOS MIOS logo. Wiigames and wiichannels load fine, even the plug-ins work. Should I install DIOS MIOS directly to the hard-drive?
I tried installing DIOS MIOS directly to the hard-drive, gave me a -2 and a -1 error, then finally, after putting the wad on my sd card, it gave me a -106 error. I can't find that in the Error index, so I'm clueless. However, I got another error, which appeared on the DIOS MIOS logo, it was a 'Fatal error app_main:dst not in MEM1!' What does that mean?
Whoo, triple post. I don't know if anyone else has found this out yet, but if you use anything above r607, if can't access your mii's. I've lost a couple of game saves because it wont load any mii's. Metroid Trilogy wont play at all. Also, another issue, it keeps on telling me that it can't find the partition, if I press reset a few times, (I've got priiloader booting to wiiflow) It will find it, but it's a random amount, usually between 1-3 resets before I get into wiiflow. If I try access mii channel on wiiflow itself, it crashes. Help?
Aight, sorry for the spam.
Last edited by HarxEdit; 08-16-2012 at 08:59 PM. Reason: Merged Posts.
Very interesting, would I be safe to assume this would work for USB Loader GX as well? Also is there anyway to get the system menu to read the emuNAND instead of the stock one?
Hey I'm back, sorry for the spam before.
I've fixed a few issues, but I've got some which are still recurring.
The most recent one is that my Wiimotes have stopped working. I have changed nothing, and yet all 4 of them, one a wiimotion plus, have stopped responding to wiiflow.
The 1.5 Tera external harddrive will still not work with DIOS MIOS. Finally, whenever I try to access the nand emulation channel, I get an exception error. Should I post the code dump?
Once again, sorry for the spam.
No, don't post the code dump. Where do u have the nand stored?
Sent from my GT-N7000 using WiiHacks
I have the nand stored in a folder called nand in the root file.
Is this to fix the exception error, or the unresponsive wiimotes. I fixed the wiimotes by just restarting the wii a few times.
Can this guide be used for USB Loader GX as well? If not can you link me to a guide that does use USB Loader GX with emuNAND?
Sent from my iPhone using WiiHacks
The nand setup from here can be used but i am unsure of the directories for usbloader GXCan this guide be used for USB Loader GX as well? If not can you link me to a guide that does use USB Loader GX with emuNAND?