hi i modded a wii 4.0u lu71 with the Trucha Bug Restorer and put neogamma in the app and it works great all my burnt games load dvdr+
i modded a 4.1u lu39 the same way
now when i load a with neo gamma its error 670
is there any other wads i have to load on the 4.1 lu39
IF FOUND THE PROBLEM THE NEW WII 41 LU39 HAS THE D3-2 CHIP DRIVE WONT READ DVDR I RETURN THAT WII AND GOT ONE FROM BEST BEST BUY A LU71 THE MOD WORK GREAT ALL MY BACK UPS PLAY FINE
bonjour .
jai une wii 4.1 e bannier brick comment ca sais passer jai installer un theme .
sur ma carte j ai nand key common key je narrive pas a reboot sur bootmii
# BootMii config file
# Created by bootmii config editor
# Video mode, possible settings:
# NTSC, PAL50, PAL60, PROGRESSIVE
VIDEO=PAL50
# Autoboot, possible settings:
# SYSMENU, HBC
AUTOBOOT=SYSMENU
BOOTDELAY=5
HackMii v0.6 installer starting up
PVR = 00087200
running under IOS 36 rev 0x412
105 titles are installed
Found IOS 0: revision: 0x0*
Found IOS 201: revision: 0xc16*
Found IOS 254: revision: 0x7a6a*
Found IOS 70: revision: 0x1a1f*
Found IOS 57: revision: 0x161d*
Found IOS 56: revision: 0x151d*
Found IOS 10: revision: 0x300.
Found IOS 55: revision: 0x151e*
Found IOS 53: revision: 0x151e*
Found IOS 51: revision: 0x1300.
Found IOS 50: revision: 0x1400*
Found IOS 38: revision: 0xf1b*
Found IOS 250: revision: 0xffff*
Found IOS 255: revision: 0x7a69*
Found IOS 61: revision: 0x151d.
Found IOS 60: revision: 0x1900*
Found IOS 249: revision: 0x4*
Found IOS 16: revision: 0x200.
Found IOS 37: revision: 0x816.
Found IOS 36: revision: 0x412.
Found IOS 35: revision: 0xd15*
Found IOS 34: revision: 0xc13.
Found IOS 33: revision: 0xc13*
Found IOS 31: revision: 0xd15*
Found IOS 30: revision: 0xb00*
Found IOS 28: revision: 0x60e*
Found IOS 22: revision: 0x40d*
Found IOS 20: revision: 0x100*
Found IOS 17: revision: 0x307*
Found IOS 15: revision: 0x20b.
Found IOS 14: revision: 0x208*
Found IOS 13: revision: 0x111*
Found IOS 12: revision: 0x10d*
Found IOS 11: revision: 0x100*
Found IOS 21: revision: 0x30e*
Found IOS 2: revision: 0x1c2.
Found IOS 9: revision: 0x30a*
Found IOS 4: revision: 0xff00.
IOS versions: Installer: 34, HBC: 61, DVDX: 36
launching IOS for the installer...starting preparationsCalling boot2_run(1, 34)
Waiting for boot2 to load ...
boot2 loaded, waiting for IOS
IOS loaded: IOS34 v12.19
IPC started (0)
parsing last generation bootmap
found valid boot2 blockmap at block 1 (pos 0x627c0), submap 0, generation 2
found valid boot2 blockmap at block 5 (pos 0xe67c0), submap 0, generation 3
parse_blocks: found 2 valid blockmaps
found 2 valid blockmaps
using generation 3
boot2 blocks: 00 01 02 03 04 05 06
boot2bin @5,0 (blocks=0,1 - bootmii=0)
bootmii@-1,-1
boot2 blocks: 06 05 04 03 02 01 00
boot2bin @5,1 (blocks=6,5 - bootmii=0)
boot2 block layout: 2 2 1 1 1 0 0
Assembling boot2 in RAM
copyright size = 34
copyright text = 'Copyright 2008,2009 Team Twiizers.'
tmd ends at 0x80295dac, data starts at 0x80295de0
bootmii version = '1.1'
prepare_bootmii: bootmii_check_boot1 failed: -2
preparations done![33;1mThe test results are in:
[37;1m Using IOS versions: Installer: 34, HBC: 61, DVDX: 36
The Homebrew Channel: [32;1mCan be installed[37;1m
DVDX: [32;1mCan be installed[37;1m
BootMii: [35;1mCan only be installed as an IOS
[37;1m The installed boot1 version prevents a boot2 install (-2)
Removing title 0x0001000148415858...
Deleting 1 ticket
A BootMii install [33;1mrequires a SD card[37;1m.
Runtime files will be written, these are required to
properly boot BootMii.
Hi, I'm new on this and I need help. wii 3.4U, LU38.
I'm using this tutoria "New 3.1-4.1 Softmod for ANY Wii"[Only Registered Users Can See Links. Click Here To Register]
I already install HBC ios36 v.12.18, although bootmii shows me "Installed boot1 version prevents a boot2 install (-2)" so I installed as an ios.
But I had a problem in step 3 "GET A CIOS"
3a ok
3b ok
3c ok
3d "cIOS38 r14 installer" shows me "Install error (ret= -2011)"
any ideas?
I was wondering if anyone could help me out. Ive got nintendo wii - firmware/system version 3.1 , I followed a diff guide before i came here and i used bannerbomb to hack the wii and done it to the boot2 option which gave me the homebrew channel. Now i have been trying to get dvd backups to play, dwnloaded things but no channels showing up. Wad manager doesnt install just keep gettin that error ret 1 error. So i followed your guide and carried on from the 2nd part by install the TBR Pack.....now my homebrew channel is upside down, ive restarted the console still the same. I don't knw what to do now. Is there anyone that could please help?
~WiiHacks Staff~ ~* Moderator*~" *We are always busy.. *ONLY Forum Donators... can PM Staff at this time if u pm me for help... you better be a Forum donator or else !!
Join Date: Feb 2009
Location: Grenada, W.I (NTSC-U)
Posts: 1,571
Downloads: 3
Uploads: 0
Thanks: 53
Thanked 618 Times in 320 Posts
Points: 10,717, Level: 31
Activity: 58.3%
Error ret 1 usually means that your SD Card is not formatted properly or your .wad files are not in the folder called WAD on your root. Make sure to format your SD Card to FAT32 and make sure the card isn't SDHC.
As for the upsidedown homebrew, just find a clean IOS36 wad and install it via WAD Manager.
Okay, I need help. I have a LU50 and 4.0U, and I got -2011, and I"m trying the TBR, but when I try to downgrade to cIOS15, it says that it cannot find cIOS15-66-v266wad.out.wad
bonjour a tous wii 4.1 e bannier brick help
Install cios error (ret= -2011)
Linear Mode
