Page 83 of 298 FirstFirst ... 3373818283848593133183 ... LastLast
Results 821 to 830 of 2978

Thread: [GUIDE] - DIOS MIOS v2.11 - Play Gamecube Backups From Your USB HDD

  1. #821
    New Member candylove's Avatar
    Join Date
    Jul 2012
    Location
    Florida
    Posts
    514
    Thanks
    63
    Thanked 176 Times in 155 Posts
    Quote Originally Posted by PirateRabbit View Post
    Whenever I try to boot from DIOS MIOS booster, or USB Loader GX it will boot the retail game inside the drive rather than the file on the USB/SD . Any idea why this is happening? My loaders are showing the files on the devices, but they just aren't loading them. It works perfectly fine if I use an older version of DML with an SD card, but I don't have the space to do that (and the loading times are dreadful) so I needed to update.
    Did you read this first guide-dios-mios and your USB is FAT32 with 32KB cluster size, first partition and your games are in USB1 and you are using USB Loader GX r1202 with DM 2.2 install for USB not DML for SD and you remove the GXGameSettings.GFG file in usbloader_gx app because it was set to use SD and now you are using USB and you try from HBC first ?
    Update to USB Loader GX r1202,usbloader GX r1202 and reinstall DIOS MIOS 2.2 wad for USB, not DIOS MIOS Lite for SD
    If you have two partitions on your hard drive? I will tell you how to change the FAT32 to first partition.
    If you have 64KB cluster size? I will tell you how to change it to 32KB without format.
    Remove the retail game inside the drive.
    Last edited by candylove; 08-30-2012 at 08:36 AM.

  2. #822
    New Member
    Join Date
    Aug 2012
    Posts
    3
    Thanks
    0
    Thanked 1 Time in 1 Post
    Yep, done all that multiple times

  3. #823
    New Member candylove's Avatar
    Join Date
    Jul 2012
    Location
    Florida
    Posts
    514
    Thanks
    63
    Thanked 176 Times in 155 Posts
    Quote Originally Posted by PirateRabbit View Post
    Yep, done all that multiple times
    DIOS MIOS may not be compatible with your HDD
    You could try Devolution
    http://gbatemp.net/topic/330554-devo...ublic-release/

  4. #824
    Moderator
    Only Site Donators Can PM Staff
    VWA
    SNES_Master's Avatar
    Join Date
    Dec 2011
    Posts
    4,226
    Thanks
    1,001
    Thanked 1,134 Times in 891 Posts
    Devolution has higher compatibility from what I've read but IMO having DIOS MIOS and Devolution is the best way cause some games that run buggy on Devo run good on DM and vice versa. They compliment each other nicely

    If only my piece of %#@! Wii could verify the discs lol

    Sent from my iPhone using WiiHacks

  5. #825
    New Member
    Join Date
    Aug 2012
    Location
    Australia
    Posts
    17
    Thanks
    3
    Thanked 0 Times in 0 Posts
    Hey I need help.

    My Wii is the Original White version with Gamecube Ports. (PAL)
    I've installed WAD Manager 1.7 and installed the Dios Mios 2.2 wad.
    I am using a SanDisk 2 GB SD Card, and a Seagate FreeAgent GoFlex 1 TB Hard Drive (partitioned first portion to FAT32 with 32kb cluster size, active and primary) and I'm using USB Loader GX r1200 loaded via Homebrew Channel 1.1.
    I have Super Mario Sunshine 'NTSC' as an iso file in the 'games' folder, which is in the hard drive.
    In the Loader settings, everything starting with DML is set to off, apart from DML Installed Version which is set to 2.2+, and video mode is None. Ocarina is off.

    So I'm stuck now because I think I'm expected to see Super Mario Sunshine as a channel when I load USB Loader right? Because I don't see it. I think might have done something wrong.

    I got a few questions as well.

    1a. My Wii is PAL, can PAL Wii's run Dios Mios v2.2?
    b. If yes, can it run both NTSC games and PAL games? What settings do I change before I run the game.
    2. I ran syscheck on my Wii, is everything there okay?

    Spoiler



    Any assistance is appreciated thanks.

  6. #826
    New Member
    Dios Mios Expert
    cwjakesteel's Avatar
    Join Date
    Nov 2010
    Posts
    300
    Thanks
    71
    Thanked 126 Times in 69 Posts
    PAL Wii's can use DIOS MIOS but you should use games from your own region. I am not qualified to judge your syscheck.

  7. #827
    Moderator
    Only Site Donators Can PM Staff
    VWA
    SNES_Master's Avatar
    Join Date
    Dec 2011
    Posts
    4,226
    Thanks
    1,001
    Thanked 1,134 Times in 891 Posts
    Your softmod appears to be outdated, I see you are missing several cIOSs (not that they're needed for DIOS MIOS, but USB Loaders do require them). Go to the "Softmod ANY Wii" guide and follow it accordingly to update your mod.

    Also rerip your game from the disc, it's best to use a game that is of the same region as your system. After ripping it you should place the untouched ISO file in USB/Games/GameID/game.iso (example using Zelda Wind Waker...only game ID I can remember lol: USB/Games/GZLE01/game.iso). The game must literally be named "game.iso" for the loader to be able to see and load it. If you still aren't seeing it go back to page 1 of this thread and start over from step 1, if it STILL doesn't work try a different USB drive.

    Sent from my iPhone using WiiHacks

  8. 2 Users Say Thank You to SNES_Master For This Useful Post


  9. #828
    New Member candylove's Avatar
    Join Date
    Jul 2012
    Location
    Florida
    Posts
    514
    Thanks
    63
    Thanked 176 Times in 155 Posts
    CaptainRambo,
    Always try dios-mios-booter r30 first if it works then you could try other usb loaders
    For USB Loader GX, go into settings>custom paths, and change the path from SD to USB1:/games/;
    GC games in USB1/games/GAMEID/game.iso
    Try different GC Backups and you could use DiscEX v 0.9 to convert GC images to the required format

  10. 1 User Says Thank You candylove For This Useful Post


  11. #829
    New Member
    Join Date
    Aug 2012
    Posts
    3
    Thanks
    0
    Thanked 1 Time in 1 Post
    I fixed my problem. For anyone who is googling this in 3 years time that has the same issue :P then I just used the latest version of WiiFlow and set the loader options to DIOS-MIOS. I tried every single loader except this one and for some reason, they weren't booting the games.

    Such a relief. It was taking over 5 seconds to open one of the stone doors in the Forest Temple... 10 seconds for a regular store.

  12. 1 User Says Thank You PirateRabbit For This Useful Post


  13. #830
    New Member
    Join Date
    Aug 2012
    Location
    Australia
    Posts
    17
    Thanks
    3
    Thanked 0 Times in 0 Posts
    Okay thanks SNES_Master and candylove for the help.

    So far I've changed the file destination to USB1/games/GAMEID/game.iso, and now I can see games in USB Loader GX. I've got Kirby Air Ride PAL version so now I can test both NTSC and PAL games. Problem is I get the black screen upon loading both those games. I think there still might be wrong settings in my loader. Otherwise, I'll try updating my softmod and I'll try other USB Loaders (I'd rather have USB Loader GX working since I use that to play my Wii games)

    I'm pretty certain my USB drive is compatible, since I can load NTSC and PAL Wii games easily in USB Loader GX, and someone mentioned the exact same hard drive as mine but smaller (mine is 1 TB instead of 250 GB) being able to play both Gamecube and Wii games.
    Last edited by CaptainRambo; 08-31-2012 at 04:18 PM.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •